Toshiba SD V394 Owner's Manual - English - Page 36

One-touch Timer Recording OTR

Page 36 highlights

Recording (VCR) One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. VCR DVD CH +/- STOP REC/OTR SP/SLP 0-9 One-touch Timer Recording (OTR) Preparation: • Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) Example: One-touch Timer Recording for 30 minutes. 1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. 2 Press SP/SLP to select the desired tape speed SP or SLP. The tape counter and "SP" or "SLP" will appear on the screen for about 4 seconds. 00 : 00 : 00 SP 3 Set "TV" or "CABLE" option to the appropriate position 27 . TV - VHF/UHF channels CABLE - Cable TV channels 4 Press Direct channel selection buttons (0-9) or CH +/- to select the channel to be recorded. +0  5 Press REC/OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours. Press Recording time Press Recording time once NORMAL REC 6 times 3:00 twice 0:30 7 times 4:00 3 times 1:00 8 times 5:00 4 times 1:30 9 times 6:00 5 times 2:00 10 times NORMAL REC The OTR and recording time will appear on the screen for about 4 seconds, then change to " ". OTCRH01: 3100 INDEX To cancel OTR Press STOP or turn off the power. 36 2I30101B-En_p32-37 36 " " will appear on the screen for about 4 seconds. Note: If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 42 . 1/12/06, 17:05

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

36
Recording (VCR)
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Press
once
twice
3 times
4 times
5 times
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
6:00
NORMAL REC
Recording time
Press
6 times
7 times
8 times
9 times
10 times
Recording time
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
2
Set “TV” or “CABLE” option to the
appropriate position
27
.
3
TV
- VHF/UHF channels
CABLE
- Cable TV channels
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded.
4
Press
REC/OTR
. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of
REC/OTR
will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
5
To cancel OTR
Press
STOP
or turn off the power.
” will appear on the screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press
VCR DVD
selector to change to DVD mode and
perform the DVD playback
42
.
0–9
CH +/–
REC/OTR
SP/SLP
VCR DVD
STOP
Preparation:
Turn ON the TV and select to the corresponding
video input.
• Press
VCR DVD
selector to select the VCR mode.
(The VCR mode indicator will light.)
Example:
One-touch Timer Recording for 30 minutes.
The OTR and recording time will
appear on the screen for about 4
seconds, then change to “
”.
2I30101B-En_p32-37
1/12/06, 17:05
36