Toshiba SD V394 Owner's Manual - English - Page 40
Duplicating a video tape
UPC - 022265411964
View all Toshiba SD V394 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Other functions (VCR) Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. VCR DVD INPUT SELECT STOP SP/SLP REC/OTR Duplicating a video tape Preparation: • Turn ON the TV and select the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. 1 Press SP/SLP to select the desired tape speed SP or SLP. It is recommended to set the tape speed to the SP mode on the recording VCR for best results. 2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position. "L1" or "L2" will appear in the display. Connection with second VCR Playback VCR To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT AUDIO/VIDEO cable (supplied) Recording VCR To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN L1: on the rear panel L2: on the front panel 3 Press PLAY on the playback VCR or Camcorder. Connection with Camcorder Playback Camcorder To AV Jack 4 Press REC/OTR on the recording VCR. The duplicating process begins. Recording VCR 5 Press STOP when you finish duplicating. To AUDIO (R) IN To AUDIO (L) IN To VIDEO IN AUDIO/VIDEO cable (not supplied) For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. 40 2I30101B-En_p38-41 40 1/12/06, 17:06