Toshiba TDP-B1-US Owners Manual
Toshiba TDP-B1-US Manual
 |
View all Toshiba TDP-B1-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba TDP-B1-US manual content summary:
- Toshiba TDP-B1-US | Owners Manual - Page 1
Before Using Preparations Operations TDP-P9 DATA PROJECTOR OWNER'S MANUAL Downloaded from www.Manualslib.com manuals search engine Maintenance Others - Toshiba TDP-B1-US | Owners Manual - Page 2
operating and maintenance (servicing) instructions in the literature accompanying hands after handling. WARNING: Lamp contains mercury. Disposal of this TDP-P9! USA ONLY TRADE NAME: DATA PROJECTOR Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL NAME: TDP manuals search engine - Toshiba TDP-B1-US | Owners Manual - Page 3
Before Using - Toshiba, could void the user's authority to operate the equipment. Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil CANADA ONLY numérique de la classe B est conforme à la norme NMB-003 du Canada. 3 Downloaded from www.Manualslib.com manuals - Toshiba TDP-B1-US | Owners Manual - Page 4
TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. 3. Source of Light Do not look into the lens while the lamp is on. The strong - Toshiba TDP-B1-US | Owners Manual - Page 5
produce heat. 6. Water and Moisture Do not use this product near water. - for example, near result in fire or electric shock. Avoid using an unsound or loose outlet. 9. cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft cloth electric shock, do not use the polarized plug with an - Toshiba TDP-B1-US | Owners Manual - Page 6
SAFETY INSTRUCTIONS (Continued by an electric surge. 14.Do not place the product vertically Do not use the product in the upright position to project the pictures, or any other damage to other unit. 13.Do not place or keep the projector within the reach of the children. It may fall down or tip over - Toshiba TDP-B1-US | Owners Manual - Page 7
by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area. 20.Servicing Do not attempt to service - Toshiba TDP-B1-US | Owners Manual - Page 8
INSTRUCTIONS (Continued) 21.Replacement Parts When replacement parts are required, be sure the service technician has used the lamp only should be made by users.) 22.Safety Check Upon completion of any service or repairs to this product, ask the service .Manualslib.com manuals search engine - Toshiba TDP-B1-US | Owners Manual - Page 9
disappears. • In a high altitude location where air is thin, cooling efficiency is reduced so use the projector with [Fan mode] set to [High]. p.36 • Only plug the power cord into outlets rated for use with the power cord's specified voltage range. Do not overload extension cords or table taps as - Toshiba TDP-B1-US | Owners Manual - Page 10
of the memory contents, etc.) arising from the use of or the inability to use this unit. • Toshiba Corporation accepts no liability whatsoever for any damages arising from not having followed the descriptions in this Instruction Manual. • Toshiba Corporation accepts no liability whatsoever for any - Toshiba TDP-B1-US | Owners Manual - Page 11
lamp contains mercury. Please dispose of this product or used lamps office, your household waste disposal service or the shop where you purchased International Business Machines Corporation. • DLP® (Digital Light Processing) is companies. Notational Conventions Used in This Manual • References to pages - Toshiba TDP-B1-US | Owners Manual - Page 12
. Using the using tissue paper. (Dispose of the used tissue paper as flammable garbage after moistening with water.) Notes • Be sure to use not mix different battery types or combine used batteries with new ones. • If are dead or if you will not be using the remote control for a long time, remove - Toshiba TDP-B1-US | Owners Manual - Page 13
Downloaded from www.Manualslib.com manuals search engine 13 Before Using - Toshiba TDP-B1-US | Owners Manual - Page 14
to use the menus 33 Image adjustment menu 34 Display setting menu 35 Default setting menu 36 Displaying Information (Status display 37 Using USB Memory 38 Maintenance About lamp 42 Lamp replacement 42 Lens and main unit cleaning 45 Downloaded from www.Manualslib.com manuals search engine - Toshiba TDP-B1-US | Owners Manual - Page 15
Before Using Others Indicators ...46 Before calling service personnel 47 Specifications 48 List of general specifications 48 Separately sold product 48 List of supported signals (RGB signals 49 List of supported signals (Video, S-Video signals 50 Pin assignment of COMPUTER IN terminals 51 - Toshiba TDP-B1-US | Owners Manual - Page 16
come in handy if you ever have to ship your projector. For maximum protection, repack the set as it was manual, including information not available for the printed Owner's manual (Getting Started) in PDF format. (PDF: Portable Document Format) Please use Acrobat Reader 5 or more to view the manual - Toshiba TDP-B1-US | Owners Manual - Page 17
Antitheft lock hole (11) Rear panel (12) Lamp cover (13) Tilt adjuster (14) Foot adjuster inside the projector. :Draws in air from outside the projector for internal cool down. :Operates the projector. p.18 p.20 :Remove to replace lamp. p.42 :Adjusts the projector's horizontal tilt. p.30 :Adjusts - Toshiba TDP-B1-US | Owners Manual - Page 18
, etc. p.33 :Selects input. p.30 :Accepts the selected mode. :Displays menus. p.33 :Displays lamp mode. p.29 :Displays whether power is on or off. p.29 :Lights when internal temperature is too the selected mode. :Displays menus. p.33 Downloaded from www.Manualslib.com manuals search engine 18 - Toshiba TDP-B1-US | Owners Manual - Page 19
picture and sound temporarily. p.31 :Pauses image. p.32 :Adjusts the volume level. :Functions as left-click of a mouse. p.23 Note • For the remainder of this manual, buttons are referred to as follows: Selection buttons Ÿ ; ENTER button Ÿ Preparations Downloaded from www.Manualslib.com - Toshiba TDP-B1-US | Owners Manual - Page 20
use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Parts on the rear panel (1) (2) (3) (4) (5) (6) (7) Name (1) Infrared remote sensor (2) SERVICE Downloaded from www.Manualslib.com manuals search engine 20 - Toshiba TDP-B1-US | Owners Manual - Page 21
remote control. Point toward the projector's infrared remote sensor, and press a button on the remote control. • Operating the projector from the front N Insert . 15° Approx. 5m • Operating the projector from the rear Two batteries (LR03, SIZE AAA) are used. O Replace the battery cover. Approx. - Toshiba TDP-B1-US | Owners Manual - Page 22
immediately. The remote control • Turn off the ON/OFF switch of the remote control when not in use or to store in baggage. • The remote control may fail to operate if the infrared remote sensor main unit again, and repeat the operation. Downloaded from www.Manualslib.com manuals search engine 22 - Toshiba TDP-B1-US | Owners Manual - Page 23
remote control A computer can be operated using the projector(s remote control. This function is available on any computer with the Windows® 98/98SE, Windows® Me, Windows® 2000, Windows® XP, or Windows VistaTM OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control - Toshiba TDP-B1-US | Owners Manual - Page 24
needs. Floor-mounted front projection Floor-mounted rear projection WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean or replace the lamp in a high location by yourself may cause you to fall, resulting in injury. Downloaded - Toshiba TDP-B1-US | Owners Manual - Page 25
Preparations Projection Distance and Size Use the figures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are ). H is the height from the image bottom to the center of the lens. Downloaded from www.Manualslib.com manuals search engine 25 - Toshiba TDP-B1-US | Owners Manual - Page 26
Connection Before connection • Read the owner(s manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.49 , etc. • Turn off the power of both devices before connecting. • - Toshiba TDP-B1-US | Owners Manual - Page 27
) Video cable (not supplied) Audio cable (not supplied) To S-video output To video output To audio output White (L)/Red (R) Preparations Downloaded from www.Manualslib.com manuals search engine 27 - Toshiba TDP-B1-US | Owners Manual - Page 28
projector. Insert the power cord plug into a wall or other power outlet. The TEMP, ON/STANDBY and LAMP not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyesight. near the air exhaust, the lamp cover or the bottom of the unit. Doing so - Toshiba TDP-B1-US | Owners Manual - Page 29
. If you are in a hurry, there is no problem with unplugging the power cord in this state. In standby mode. Note • The projector consumes about 8W of power in standby. We recommend that you unplug the power cord if you will not be using the projector for an extended period. Precaution • If the power - Toshiba TDP-B1-US | Owners Manual - Page 30
the lamp depends on conditions of use.) • The DLP® chip is made using extremely advanced technology, but there may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not malfunctions. • Although this projector supports - Toshiba TDP-B1-US | Owners Manual - Page 31
the projector to the optimum state such as sampling phase, frequency and screen position for each type of the input signal by using simple those supported by the projector p.49 , p.50 / Correcting the keystone distortion Remote Control When the projector placement .com manuals search engine 31 - Toshiba TDP-B1-US | Owners Manual - Page 32
is in effect. • Other operation will also release the freeze. • Although an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on commercial video software, broadcast or cable-broadcasting except for the purpose of your private - Toshiba TDP-B1-US | Owners Manual - Page 33
the operation buttons on the control panel (main unit side) and remote control p.18 , p.19 . How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button. The Image adjustment menu appears. 2. Select a Category - Toshiba TDP-B1-US | Owners Manual - Page 34
menus (continued) Image adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with "Yes", [Tint] can be displayed and adjusted only when the video signal is [NTSC] or [NTSC4.43]. Downloaded from www.Manualslib.com manuals search engine 34 - Toshiba TDP-B1-US | Owners Manual - Page 35
File view mode. Slideshow Set slideshow mode. Auto Manual No No No Interval Adjust the interval time in (Blue) < > (Black) Icon Display icons as function guides. On Off Yes Yes Yes USB Yes Yes Yes Yes Yes screen overlaps previous image • If you use the screen size setting function on - Toshiba TDP-B1-US | Owners Manual - Page 36
lamp power. Normal Low Yes Yes Sets whether to turn on the power when the ON/ Yes Yes Power on [Note] STANDBY button is pressed (Manual), or when the power is supplied (Auto). Manual however, do not set Fan mode to [High] when using the projector at a lower altitude. • Note that if [Power on - Toshiba TDP-B1-US | Owners Manual - Page 37
Note • The mode of supported RGB signals p.49 !is shown. • [Firmware version] shows the version of the projector's internal control program. This version is referred to for customer service, etc. • Displays [Lamp time] as a measure of when the lamp should be replaced. (Cannot be used as a counter of - Toshiba TDP-B1-US | Owners Manual - Page 38
Using USB Memory Connect the USB memory to the projector and select USB input Press INPUT button to select USB source. Plug the USB memory to the USB port. USB memory Note • USB HDD or hub is not supported not supported and will be displayed as "?". • Only folders, JPEG files or supported movie - Toshiba TDP-B1-US | Owners Manual - Page 39
will be shown in the picture. This indicates the end of the slideshow. The slideshow ends and the projector enters in the file view!mode. When "Slideshow loop" sets to "On", the slideshow starts from slideshow will not stop. Operations Downloaded from www.Manualslib.com manuals search engine 39 - Toshiba TDP-B1-US | Owners Manual - Page 40
USB devices. TOSHIBA USB memory :U2E series (256MB, 512MB, 2GB) SanDisk USB memory :SDCZ4 series (1GB, 2GB) SanDisk USB memory :SDCZ6 series (1GB) SanDisk USB memory :SDCZ7 series (2GB) Note • This projector does not support all USB memories. Downloaded from www.Manualslib.com manuals search engine - Toshiba TDP-B1-US | Owners Manual - Page 41
the memory PC card, the USB memory, and in the memory card onto your computer before use. (Toshiba assumes no liability for losses!incurred by data lost through the use of this projector.) Q JPEG files • Supported file extensions are .jpg and .JPG. • Some JPEG files such as interlaced JPEG are not - Toshiba TDP-B1-US | Owners Manual - Page 42
been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it. • If the lamp should break, please handle with care to avoid injury due to broken pieces and contact your dealer for repair service. Downloaded - Toshiba TDP-B1-US | Owners Manual - Page 43
, and lock in place using the two lamp locking screws. Replace the lamp cover. Align the cover, and press it in, then tighten the!screw loosened in step cover is no longer loose. (Be sure to replace the lamp cover.) Reset the lamp timer. See the lamp's manual for instructions on resetting!the - Toshiba TDP-B1-US | Owners Manual - Page 44
the time of lamp use (as a rough guide). p.37 • It is recommended that the lamp be replaced after 2,000 hours of use. When [Lamp time]!reaches 2,000 lamp.) Used Lamps This projector's lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, - Toshiba TDP-B1-US | Owners Manual - Page 45
not wipe the main unit with a damp cloth. Doing so may allow water to get inside, resulting in an electric shock or failure. • Do not use benzene, thinner and the like as they may! deform or discolor the unit or damage the paint!surface. • Do not - Toshiba TDP-B1-US | Owners Manual - Page 46
OItnhers dicators State/ Problems Icon/ Messages Environment overheat Close Messages LED Indicators TEMP LAMP On Fan lock System error F2 F2 Lamp life time Lamp error The lamp life is ending. Press any key On F2: Flash 2Hz Downloaded from www.Manualslib.com manuals search engine 46 - Toshiba TDP-B1-US | Owners Manual - Page 47
wrong, check the followings before contacting customer service. Please see "Indicators" p.46 as well. . If This Happens Check No power • Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover open? Power is lost during use • Is the ambient temperature high? • Is - Toshiba TDP-B1-US | Owners Manual - Page 48
(0 - 40,000 feet) Display device 1 DLP® chip Picture elements True 1024 x 768 resolution, Analog RGB / Y/PB/PR (dual use) VIDEO: RCA Pin Jack VIDEO terminal ) USB type B (for service only) Note • This model Lamp: Model TLPLP20. Downloaded from www.Manualslib.com manuals search engine 48 - Toshiba TDP-B1-US | Owners Manual - Page 49
RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. quality may be affected. Others Downloaded from www.Manualslib.com manuals search engine 49 - Toshiba TDP-B1-US | Owners Manual - Page 50
Specifications (Continued) „ List of supported signals (Video, S-Video signals) Signal 480i 480p 576i 576p 720p 720p 1080i 1080i Horizontal Frequency (kHz) 15.8 kHz 31.5 kHz 15.6 kHz (Hz) 60 Hz 60 Hz 50 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz Downloaded from www.Manualslib.com manuals search engine 50 - Toshiba TDP-B1-US | Owners Manual - Page 51
D-sub 15 pin connector Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 „ Pin assignment of S-VIDEO terminals Spec RED GREEN BLUE NC GND GND GND GND VCC 5V NC NC SDA HSYNC VSYNC SCL Pin No. 1 2 3 4 Spec GND GND SVID_LUM SVID_CHR Others Downloaded from www.Manualslib.com manuals search engine 51 - Toshiba TDP-B1-US | Owners Manual - Page 52
Downloaded from www.Manualslib.com manuals search engine
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
Before Using
Preparations
Operations
Maintenance
Others
TDP-P9
DATA PROJECTOR
OWNER’S MANUAL
Downloaded from
www.Manualslib.com
manuals search engine