Toshiba TDP S20 Owners Manual

Toshiba TDP S20 - SVGA DLP Projector Manual

Get Toshiba TDP S20 - SVGA DLP Projector PDF manuals and user guides View all Toshiba TDP S20 manuals
Add to My Manuals
Save this manual to your list of manuals

Toshiba TDP S20 manual content summary:

  • Toshiba TDP S20 | Owners Manual - Page 1
    Others Maintenance Operations Preparations Before Using OWNER'S MANUAL DATA PROJECTOR TDP-S20 TDP-S21 (SVGA) (SVGA / With Document Camera)
  • Toshiba TDP S20 | Owners Manual - Page 2
    user to the presence of important operating and maintenance (servicing) instructions TDP-S20 USA only TRADE NAME: DATA PROJECTOR Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL NAME: TDP-S20 FCC NOTICE: This device complies with part PARTY: TOSHIBA AMERICA instruction manual
  • Toshiba TDP S20 | Owners Manual - Page 3
    TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual 3. Source of Light After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. Do not look into the lens while the lamp is on. The strong
  • Toshiba TDP S20 | Owners Manual - Page 4
    the pictures at the ceiling, or any other lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to injury. In the unlikely event of the lamp rupturing, thoroughly clean the area around the projector
  • Toshiba TDP S20 | Owners Manual - Page 5
    , be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.) 20. Safety Check
  • Toshiba TDP S20 | Owners Manual - Page 6
    projector. Model No. Serial No. Retain this information for future reference. EXEMPTION CLAUSES • Toshiba problems. • Toshiba Instruction Manual. • Toshiba parts contains the lead. • The lamp contains inorganic mercury. Please dispose of this product or used lamps battery in the remote control. • Do
  • Toshiba TDP S20 | Owners Manual - Page 7
    37 Maintenance About lamp ...38 Lamp replacement 38 Lens and main unit cleaning 40 12 Others Trouble indications 41 Before calling service personnel 42 Specifications ...44 List of general specifications 44 Document camera specifications (TDP-S21 44 List of supported signals (RGB signals
  • Toshiba TDP S20 | Owners Manual - Page 8
    air that has grown hot inside the projector. : Operates the projector. p.16 : Adjusts screen size. p.25 : Draws in air from outside the projector. : Connects external devices. p.17 : Adjusts the projector's horizontal tilt. p.25 : Remove to replace lamp. p.39 : Adjusts the vertical projection angle
  • Toshiba TDP S20 | Owners Manual - Page 9
    part on the control panel and remote control Control panel Remote Control Remote control transmitter (9) (10) (11) (3) (4) TEMP LAMP FAN (6) (2) (1) (8) (2) (13) (12) (1) (7) (3) (8) (6) (5) (4) (7) Name (1) ENTER button (2) MENU button (3) SET UP button (4) ON/STANDBY button
  • Toshiba TDP S20 | Owners Manual - Page 10
    the projector's infrared remote sensor, and press a button on the remote control. • Operating the projector from the front w Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly. Approx. 15° Approx. 5m Two batteries (R6, SIZE AA) are used. e Replace
  • Toshiba TDP S20 | Owners Manual - Page 11
    WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury. • If you wish to mount the projector on the ceiling, be sure to ask your
  • Toshiba TDP S20 | Owners Manual - Page 12
    disappears.) 2 Press the ON/STANDBY button again. The screen turns off, but the internal cooling fan continues to operate for a short while. Then, the projector goes into standby mode. When cooling lamp TEMP LAMP FAN During internal cooling TEMP LAMP FAN After cooling complete TEMP
  • Toshiba TDP S20 | Owners Manual - Page 13
    turn off the LCD display, see the owner's manual of your computer. • If a signal not supported by the projector is input, the "Unsupported signal" will appear. • If no signal is being input from the connected device, the "No signal" will appear. • If an unavailable operation button is pressed, the
  • Toshiba TDP S20 | Owners Manual - Page 14
    angle while projecting the image, the picture will undergo keystone (trapezoidal) distortion. This projector is capable of correcting this keystone distortion. Before correction After correction ● Manual adjustment Press the SET UP button to display the Set up menu and select [Keystone]. Use the
  • Toshiba TDP S20 | Owners Manual - Page 15
    projector, overhead projector, etc. temporarily, this projector's images and sound can be turned off. Press the remote control's MUTE button Remote Control Press the remote control's FREEZE button. The picture pauses. (The Freeze function is released when pressing the FREEZE button button instructions
  • Toshiba TDP S20 | Owners Manual - Page 16
    level with / button. No No Yes projector off disables this function and turning it on again the next time resets the menu to [Auto]. (TDP guides On Off Display start-up screen when power is turned on On Off Note • If "Thru" is selected for screen size, portions exceeding the native resolution
  • Toshiba TDP S20 | Owners Manual - Page 17
    approaches 3,000 hours, consult with a store about getting a TLPLV4 replacement lamp (sold separately) prepared. 5: [Version] shows the version of the projector's internal control program. This version is referred to for customer service, etc. Note • The displayed information will not be refreshed
  • Toshiba TDP S20 | Owners Manual - Page 18
    you purchased is TDP-S21 which includes a document camera. ■ How to use the document camera Using the camera attached on the projector Status before preparation tray should be performed in the reverse order shown above. • When replacing the document camera on the tray, ensure that the lock lever is
  • Toshiba TDP S20 | Owners Manual - Page 19
    select camera input. • The input returns to the previous input when the CAMERA button is pressed again. • Camera input can also be selected by pressing either the remote control or projector's INPUT button. 3 Rotate the camera head to align the orientation of the document for shooting by checking
  • Toshiba TDP S20 | Owners Manual - Page 20
    2 5 1 7 Reset the lamp timer. See the lamp's manual for instructions on resetting the lamp timer. Notes and Precautions • Press the button twice to display (a rough guide) the time of lamp use, the Lamp time item, in the Status display menu. p.33 • It is recommended that the lamp be replaced after
  • Toshiba TDP S20 | Owners Manual - Page 21
    it is recommended that cooling fans should be replaced about every 2 to 3 years. Consult with your dealer for details. 40 Others Trouble indications The indicator lights inform you of internal abnormalities. TEMP No power LAMP FAN ⇒ Problem with projector • Unplug the power cord, and contact
  • Toshiba TDP S20 | Owners Manual - Page 22
    the projector's supported range? p.20 • Is the projector's screen placement angle tilted too far? p.20 • Are the sharpness or sampling phase adjustments off? p.27 p.30 Image is dark • Are the brightness or contrast adjustments off? p.30 • Is the lamp nearing the end of its service life? p.33
  • Toshiba TDP S20 | Owners Manual - Page 23
    signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. (Press the SET UP button, and adjust automatically or manually. p.26 , p.27 ) Resolution 720 x 400
  • Toshiba TDP S20 | Owners Manual - Page 24
    Specifications (Continued) ■ List of supported of supported signals supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended ACK (06h) ESC (1Bh) ... Aborted No acknowledge NAK (15h) If commands are to be sent consecutively, wait for the response from the projector (TDP
  • Toshiba TDP S20 | Owners Manual - Page 25
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
DATA PROJECTOR
TDP-S20
(SVGA)
TDP-S21
(SVGA / With Document Camera)