Toshiba TDP-S8U Owners Manual

Toshiba TDP-S8U Manual

Get Toshiba TDP-S8U PDF manuals and user guides View all Toshiba TDP-S8U manuals
Add to My Manuals
Save this manual to your list of manuals

Toshiba TDP-S8U manual content summary:

  • Toshiba TDP-S8U | Owners Manual - Page 1
    Others Maintenance Operations Preparations Before Using OWNER'S MANUAL (Getting Started) DATA PROJECTOR TDP-S8 For more details , please refer to the owner's manual of the CD-ROM version
  • Toshiba TDP-S8U | Owners Manual - Page 2
    operating and maintenance (servicing) instructions in the literature accompanying TDP-S8 USA only TRADE NAME: DATA PROJECTOR Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL NAME: TDP-S8 FCC NOTICE: This device complies with part a Class B digital device, pursuant to part 15 of the
  • Toshiba TDP-S8U | Owners Manual - Page 3
    Before Using - Reorient or relocate the receiving antenna. - Increase the separation between not expressly approved by USA only Toshiba, or parties authorized by Toshiba, could void the user's authority to operate the equipment. WARNING: This Class B digital apparatus complies with Canadian ICES-003
  • Toshiba TDP-S8U | Owners Manual - Page 4
    procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be manual carefully, and lamp is on. The strong light from follow all the operating and other the lamp may cause damage to instructions. your eyes or sight. 2. Power
  • Toshiba TDP-S8U | Owners Manual - Page 5
    Before Using 5. Heat 8. Power-Cord Protection The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Power-supply cords should be routed so that they are not likely to be walked on or pinched by
  • Toshiba TDP-S8U | Owners Manual - Page 6
    INSTRUCTIONS (Continued) 10. Lightning storms For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power or short-out parts that could result
  • Toshiba TDP-S8U | Owners Manual - Page 7
    , including a lens and a lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to injury. In the unlikely event of the lamp rupturing, thoroughly clean the area around the projector and discard any
  • Toshiba TDP-S8U | Owners Manual - Page 8
    IMPORTANT SAFETY INSTRUCTIONS (Continued) 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric
  • Toshiba TDP-S8U | Owners Manual - Page 9
    Before Using POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. Plug configuration Plug type EURO Line voltage 220 240V Plug configuration Plug type Australian 240V 10A Line voltage 200 240V UK 220 240V Use a 5A fuse which is approved
  • Toshiba TDP-S8U | Owners Manual - Page 10
    of the memory contents, etc.) arising from the use of or the inability to use this unit. • Toshiba Corporation accepts no liability whatsoever for any damages arising from not having followed the descriptions in this Instruction Manual. • Toshiba Corporation accepts no liability whatsoever for any
  • Toshiba TDP-S8U | Owners Manual - Page 11
    waste disposal service or the used lamps in accordance with local regulations. Trademarks • VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of International Business Machines Corporation. • Digital Light Processing, Digital Notational Conventions Used in This Manual • References
  • Toshiba TDP-S8U | Owners Manual - Page 12
    . • Attention should be drawn to the environmental aspects of battery disposal. • Do not mix different battery types or combine used batteries with new ones. • If the remote control does not operate correctly, or if the operating range becomes re- duced, replace both batteries with new ones. • If
  • Toshiba TDP-S8U | Owners Manual - Page 13
    Before Using CONTENTS Before Using SAFETY PRECAUTIONS 2 IMPORTANT SAFETY INSTRUCTIONS 4 POWER SUPPLY CORD SELECTION 9 IMPORTANT PRECAUTIONS 9 EXEMPTION CLAUSES 10 OTHER CAUTIONS AND INFORMATIONS 11 REMOTE CONTROL BATTERIES 12 Preparations Checking the package contents 15 Names of each part
  • Toshiba TDP-S8U | Owners Manual - Page 14
    Separately sold product 41 List of supported signals (RGB signals 42 List of supported signals (Y/PB/PR signals 43 List of supported signals (Video, S-Video signals 43 Pin assignment of COMPUTER IN & MONITOR terminals 43 CONTROL terminal ...44 14
  • Toshiba TDP-S8U | Owners Manual - Page 15
    ) (7) Carrying bag Note The shape and number of supplied power cords vary depending on the product destination. The Supplied CD-ROM The supplied CD-ROM contains an owner's manual, including information not available for the printed Owner's manual (Getting started) and Acrobat® Reader™ to view the
  • Toshiba TDP-S8U | Owners Manual - Page 16
    : Connect the supplied power cord here. (10) Rear panel : Connects external devices. p.17 (11) Antitheft lock hole : Attach a safety cable or any other antitheft device. (12) Speaker : Outputs audio sound. (13) Tilt adjuster : Adjusts the projector's horizontal tilt. p.24 (14) Lamp cover
  • Toshiba TDP-S8U | Owners Manual - Page 17
    part on the control panel and remote control Control panel (9) (8) (7) (6) (5) POWER KEYSTONE + KEYSTONE - (3) (1) (3) (2) (4) CAUTION • Do not look into the laser light source of the remote Selection button (7) LAMP indicator (8) POWER indicator (9) TEMP indicator Remote control (1) ENTER
  • Toshiba TDP-S8U | Owners Manual - Page 18
    Parts on the rear panel (1) (2) (3) (4) (5) (6) Name (1) MONITOR terminal (2) COMPUTER IN terminal (3) S-VIDEO terminal video signals from video equipment. : Input audio signals. RS232C :When operating the projector via a computer, connect this to the controlling computer's RS-232C port. p.44
  • Toshiba TDP-S8U | Owners Manual - Page 19
    Preparing and using the remote control ■ Loading dry-cell batteries into the remote control  Remove the battery cover. ■ Operating the remote control Point toward the projector's infrared remote sensor, and press a button on the remote control. • Operating the projector from the front  Insert
  • Toshiba TDP-S8U | Owners Manual - Page 20
    rear projection WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury. • If you wish to mount the projector on the ceiling, be sure to
  • Toshiba TDP-S8U | Owners Manual - Page 21
    Preparations Projection Distance and Size Use the figures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are approximate values for full-size picture with no
  • Toshiba TDP-S8U | Owners Manual - Page 22
    manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.42 , etc. • Turn off the power cable (not supplied) To video output To audio input Audio cable (not supplied) p.44
  • Toshiba TDP-S8U | Owners Manual - Page 23
    1 Press the ON/STANDBY button. The power turns on the green indicators light: POWER. After a moment, the start-up screen appears. Control panel POWER Remote Control KEYSTONE + KEYSTONE - Start-up screen Operations CAUTION • Do not look into the lens while the lamp is on. The strong light from
  • Toshiba TDP-S8U | Owners Manual - Page 24
    in a hurry, there is no problem with unplugging the power cord or turning off the main power switch in this state. B In standby mode Note • The projector consumes about 15W of power in standby. We recommend that you unplug the power cord if you will not be using the projector for an extended period
  • Toshiba TDP-S8U | Owners Manual - Page 25
    Basic operations 1 Turn on the power. Turn on the power by following the instructions in "Turning the power on" p.23 . 2 Select the language (When using the first time). When the projector is used for the first time after purchase,the start menu for language(to display the menus and messages on
  • Toshiba TDP-S8U | Owners Manual - Page 26
    of the lamp depends on conditions of use.) • The DMDTM is made using extremely advanced technology, but there may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not malfunctions. • Although this projector supports
  • Toshiba TDP-S8U | Owners Manual - Page 27
    by using simple operations. Press the remote control's AUTO SET button. For computer input, the icon will appear during processing. Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.41
  • Toshiba TDP-S8U | Owners Manual - Page 28
    the FREEZE button again.) Remote Control Notes • The icon will appear while freeze is in effect. • Other operation will also release the freeze. • Even if an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on commercial video
  • Toshiba TDP-S8U | Owners Manual - Page 29
    Enter a 4 digit number for the password using numeric key of the remote control. The input power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector
  • Toshiba TDP-S8U | Owners Manual - Page 30
    up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.17 on the control panel (main unit side) and remote control. ■ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the
  • Toshiba TDP-S8U | Owners Manual - Page 31
    ■ The image adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with "Yes", and those that cannot are
  • Toshiba TDP-S8U | Owners Manual - Page 32
    o input signal (Logo) (Black) Display icons as function guides Lower Higher (Blue) On Off Reset all Press . Resets RGB pixel signal is thinned before sampling. • If you use the screen size setting function on commercial video software, TOSHIBA is set for [Logo] by factory setting. 32
  • Toshiba TDP-S8U | Owners Manual - Page 33
    or when the power cord is plugged in (Auto). Manual Auto Detailed description [Fan mode] Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector, for example, at high altitude (over 1,500 meters above sea level). [Lamp power] When [Lamp power] is set to
  • Toshiba TDP-S8U | Owners Manual - Page 34
    Yes Notes 1: The mode of supported RGB signals p.42 is shown. 2: Sync signal polarity shown as P (positive) or N (negative) for [H/V]. 3: Displays [Lamp time] as a measure of when the lamp should be replaced. (Cannot be used as a counter of guaranteed lamp time.) When the displayed time approaches
  • Toshiba TDP-S8U | Owners Manual - Page 35
    .) If this happens, replace it with a new one. WARNING • If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealership when the lamp has to be exchanged. Uncovering the lamp while the projector is mounted on a ceiling may lead to a danger of damage from falling pieces
  • Toshiba TDP-S8U | Owners Manual - Page 36
    replacement (Continued) 1 Unplug power cord. 2 Wait until lamp is sufficiently cooled. Wait for at least 1 hour. 3 Remove the lamp cover. 3 Loosen the two screws, raise the outer lamp cover with your fingers as shown to remove the outer lamp cover. Use care to avoid any damage to nails and/or
  • Toshiba TDP-S8U | Owners Manual - Page 37
    lamp timer. See the lamp's manual for instructions on resetting the lamp timer. Notes and Precautions • It is recommended that the lamp be replaced after 2,000 hours of use.When [Lamp time] reaches 2,000 hours,the icon and a message will appear. (After 2,000 hours, they will appear when the power
  • Toshiba TDP-S8U | Owners Manual - Page 38
    ceiling-mounted unit from your projector dealership. Attempting to clean/replace the lamp at a high site by ■ Main unit cleaning • Clean the main unit after unplugging the power cord. • Wipe dirt off the main unit gently with a • Do not use benzene, thinner and the like as they may deform or discolor
  • Toshiba TDP-S8U | Owners Manual - Page 39
    Trouble indications The indicator lights inform you of interminal abnormalities. POWER No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer. POWER (Red lit) (Red lit) POWER POWER FLASH POWER FLASH FLASH Lamp went out during use, or won't come on ⇒ Lamp
  • Toshiba TDP-S8U | Owners Manual - Page 40
    contacting customer service. Please see "Trouble indications" p.39 as well. If This Happens Check No power • Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover attached properly? p.36 Power goes out • Is the ambient temperature high? p.39 during use • Is the
  • Toshiba TDP-S8U | Owners Manual - Page 41
    Power Weight External Dimensions (including protruding parts) Cabinet material Conditions for usage environment Display pixels Picture elements Lens Lamp 5mm dia stereo mini-jack Mini D sub 15 pin RGB / Y/PB/PR (dual use) 3.5mm dia. stereo mini-jack Notes • This model complies with the above specifi
  • Toshiba TDP-S8U | Owners Manual - Page 42
    Specifications (Continued) ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. Resolution 640x480 720x400 800x600
  • Toshiba TDP-S8U | Owners Manual - Page 43
    ■ List of supported signals (Y/PB/PR signals) Signal format fh(kHz) fv(Hz) * 480i(525i)@60Hz 37.50 50.00 1080i(1125i)@60Hz 33.75 60.00 1080i(1125i)@50Hz 28.13 50.00 ■ List of supported signals (Video, S-Video signals) Video mode fh(kHz) fv(Hz) fsc(MHz) NTSC 15.73 60 3.58 PAL
  • Toshiba TDP-S8U | Owners Manual - Page 44
    ■ CONTROL terminal ● Pin assignment 7 8 6 5 3 4 21 Mini DIN 8 pin connector Pin No. 1 2 3 4 5 6 7 8 Signal Name RXD N.C N.C GND N.C N.C TXD GND Description Receiving data No connection No connection Signal ground No connection No connection Sending data Signal ground Notes • Contact your
  • Toshiba TDP-S8U | Owners Manual - Page 45
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
OWNER'S MANUAL (Getting Started)
DATA PROJECTOR
TDP-S8
For more details , please refer to the owner's manual of the CD-ROM version
Others
Maintenance
Operations
Preparations
Before Using