Toshiba TDP-SC25 User Manual
Toshiba TDP-SC25 Manual
 |
View all Toshiba TDP-SC25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba TDP-SC25 manual content summary:
- Toshiba TDP-SC25 | User Manual - Page 1
Others Maintenance Operations Preparations Before Using OWNER'S MANUAL DATA PROJECTOR TDP-S25 (SVGA) TDP-SC25 (SVGA / With Document Camera) - Toshiba TDP-SC25 | User Manual - Page 2
the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TDP-S25 USA only TRADE NAME: DATA PROJECTOR Tested To Comply With FCC Standards FOR HOME OR OFFICE USE MODEL NAME: TDP-S25 FCC NOTICE: This device complies with part - Toshiba TDP-SC25 | User Manual - Page 3
TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual 3. Source of Light After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. Do not look into the lens while the lamp is on. The strong - Toshiba TDP-SC25 | User Manual - Page 4
, including a lens and a lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to injury. In the unlikely event of the lamp rupturing, thoroughly clean the area around the projector and discard any - Toshiba TDP-SC25 | User Manual - Page 5
replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.) 20. Safety Check Upon completion of any service or repairs - Toshiba TDP-SC25 | User Manual - Page 6
from not having followed the descriptions in this Instruction Manual. • Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions arising from combination with equipment or software that is not related to Toshiba Corporation. 10 OTHER CAUTIONS AND INFORMATIONS - Toshiba TDP-SC25 | User Manual - Page 7
37 Maintenance About lamp ...38 Lamp replacement 38 Lens and main unit cleaning 40 12 Others Trouble indications 41 Before calling service personnel 42 Specifications ...44 List of general specifications 44 Document camera specifications (TDP-SC25 44 List of supported signals (RGB signals - Toshiba TDP-SC25 | User Manual - Page 8
AA) batteries for remote control (2) ■ (3) CD-ROM ■ (4) Owner's Manual ■ (5) Power cord (See note) ■ (6) RGB cable (3m) ■ (7) Carrying bag ■ (8) RGB cable (25cm)* * : Supplied with TDP-SC25 : The RGB cable (25 cm) supplied in this package has already been connected to the projector at the factory - Toshiba TDP-SC25 | User Manual - Page 9
, or a component video signal (Y/PB/PR) from video equipment. For TDP-SC25, use exclusively for document camera connection. Note • Although this owner's manual abbreviates component video signals as Y/PB/PR, the product also supports signals from video equipment marked "Y/CB/CR." 17 Preparations - Toshiba TDP-SC25 | User Manual - Page 10
of each part on the document camera (TDP-SC25) (1) (2) (10) (4) (6) (7) (3) (8) (12) (5) (9) (11) Name (1) Camera head (2) Camera lens (3) Focusing lever (4) Camera arm (5) Lock lever (6) CAMERA button (7) CAMERA GAIN buttons (8) Tip resistant bar (9) Camera output terminal (CAMERA OUT - Toshiba TDP-SC25 | User Manual - Page 11
rear projection WARNING • Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury. • If you wish to mount the projector on the ceiling, be sure to - Toshiba TDP-SC25 | User Manual - Page 12
the LAMP indicator goes off, the cooling fan continues to operate for a short while, in order to expel excess internal heat. If you are in a hurry, there is no problem with unplugging the power cord or turning off the main power switch in this state. C In standby mode Note • The projector consumes - Toshiba TDP-SC25 | User Manual - Page 13
the images from displaying properly. If this happens, turn off the computer's LCD display. For information on how to turn off the LCD display, see the owner's manual of your computer. • If a signal not supported by the projector is input, the "Unsupported signal" will appear. • If no signal is being - Toshiba TDP-SC25 | User Manual - Page 14
manual adjustment and setting, see the following table p.27 . Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector Y/PB/PR Video S-video Camera Correct the keystone (trapezoid) distortion - Toshiba TDP-SC25 | User Manual - Page 15
projector, overhead projector, etc. temporarily, this projector's images and sound can be turned off. Press the remote projector, the pictures are running on the video or other equipment. • If you use this function on video software operation instructions purposes data will not be saved. 29 Operations - Toshiba TDP-SC25 | User Manual - Page 16
camera to No No No Yes the local power frequency. (TDP-SC25) 50 Hz 60 Hz White Set the white balance of the document No No No Yes balance*2 camera. (TDP-SC25 projector off disables this function and turning it on again the next time resets the menu to [Auto]. (TDP-SC25 function guides On - Toshiba TDP-SC25 | User Manual - Page 17
for lamp replacement Yes Yes The total time that this projector is used Yes Yes Firmware version [Note 5] Yes Yes Video S-video Yes No No No No No No No Yes Yes Yes Yes Yes Camera Yes No No No No No No No No Yes Yes Yes Yes Notes 1: The mode of supported RGB - Toshiba TDP-SC25 | User Manual - Page 18
purchased is TDP-SC25 which includes a document camera. ■ How to use the document camera Using the camera attached on the projector Status before preparation (When stored) 1) Set up arm. 2) Rotate arm. 3) Raise camera head. Using the camera removed from the projector Status before preparation - Toshiba TDP-SC25 | User Manual - Page 19
the document camera 1 Place the document. Set the document at the side of the projector. 2 Press the CAMERA button, and select camera input. • The input returns to the previous input when the CAMERA button is pressed again. • Camera input can also be selected by pressing either the remote control - Toshiba TDP-SC25 | User Manual - Page 20
7 Reset the lamp timer. See the lamp's manual for instructions on resetting the lamp timer. Notes and Precautions • Press the button twice to display (a rough guide) the time of lamp use, the Lamp time item, in the Status display menu. p.33 • It is recommended that the lamp be replaced after 3,000 - Toshiba TDP-SC25 | User Manual - Page 21
not clear the problem, unplug the power cord, and contact your dealer. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. TDP-SC25 TEMP LAMP FAN (Green lit) (Red lit) Power went out during use ⇒ Camera is not correctly - Toshiba TDP-SC25 | User Manual - Page 22
lights shining at the projector's infrared remote sensor? 42 If This Happens TDP-SC25 The images from the document camera are blurry TDP-SC25 The images from the document camera are flickering Check • Is the document imaging camera's lens dirty? • Is the document imaging camera out of focus? p.36 - Toshiba TDP-SC25 | User Manual - Page 23
Connection terminal Others Specifications ■ List of general specifications Item Specification Consumption Power 250 W Weight TDP-S25: 3.0 kg TDP-SC25: 3.9 kg External Dimensions TDP-S25: 285 × 98 × 254 mm (W × H × D) (including protruding parts) TDP-SC25: 369 × 98 × 259 mm (W × H × D) - Toshiba TDP-SC25 | User Manual - Page 24
alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended Camera input select (TDP-SC25) Command IN1 IN2 IN3 IN4 IN5 Status display off DOF Note • Contact your dealer for control cable and other commands. ■ Separately Sold Product Replacement Lamp - Toshiba TDP-SC25 | User Manual - Page 25
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
 |
 |
Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
DATA PROJECTOR
TDP-S25
(SVGA)
TDP-SC25
(SVGA / With Document Camera)