Toshiba TDP-T95 User Manual - Page 24

Lens and main unit cleaning WARNING • Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership. Attempting to clean/replace the lamp at a high site by yourself may cause you to fall down, thus resulting in injury. ■ Lens cleaning • Clean the lens with a commercially available blower and/or lens cleaner. • The lens is easily scratched, so do not rub it with hard objects, or strike it. ■ Main unit cleaning • Clean the main unit after unplugging the power cord. • Wipe dirt off the main unit gently with a soft cloth. • Do not wipe the main unit with a damp cloth. Doing so may allow water to get inside, resulting in an electric shock or failure. • Do not use benzene, thinner and the like as they may deform or discolor the unit or damage the paint surface. • When using a chemically treated cloth, follow the precautions included with the cloth. 46 Trouble indications The indicator lights to inform you of internal abnormalities. No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer. (Off) (Red lit) (Red lit) Lamp went out during use, or won't come on ⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of the lamp has ended or the projector is malfunctioning. • Unplug the power cord and wait for a short while, then turn the power back on. • If a lamp burns out, replace it with a new one. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Power went out during use (Red lit) ⇒ Internal overheating, or the outside temperature is too high. Or (Orange lit()Green lit) • Place the projector so that the air intake and exhaust are not blocked. • Unplug the power cord and wait for a short while, then turn the power (Red lit) back on. ❈ The icon will appear before the power goes out. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. Power went out during use ⇒ Problem with internal cooling fan. (Red lit or flashing) • Unplug the power cord, and contact your dealer. Or (Orange lit or flashing) (Red lit) ❈ The icon will appear before the power goes out. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. (Orange flashing) (Red lit) Power went out during use, or power won't come on ⇒ The lamp cover is not properly attached. • Unplug the power cord, and reattach the lamp cover. p.44 ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. (Red lit) Power went out during use ⇒ Problem inside the projector. (Green flashing) • Unplug the power cord and wait for a short while, then turn the power back on. • If the above action will not clear the problem, unplug the power cord, and contact your dealer. ❈ The icon will appear before the power goes out. ❈ After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down. 47 Others