Toshiba TDP-TW95 User Manual
Toshiba TDP-TW95 Manual
 |
View all Toshiba TDP-TW95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba TDP-TW95 manual content summary:
- Toshiba TDP-TW95 | User Manual - Page 1
OWNER'S MANUAL DATA PROJECTOR TDP-TW95 TDP-TW100 Others Maintenance Operations Preparations Before Using - Toshiba TDP-TW95 | User Manual - Page 2
user to the presence of important operating and maintenance (servicing) instructions TDP-TW95/TDP-TW100 FCC Radio Frequency Interference Statement Note: This equipment has been tested accordance with the instruction manual, may cause Toshiba, or parties authorized by Toshiba, could void the user's - Toshiba TDP-TW95 | User Manual - Page 3
TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner's Manual After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions. 3. Source of Light Do not look into the lens while the lamp is on. The strong - Toshiba TDP-TW95 | User Manual - Page 4
operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area. 18. Servicing Do not attempt to service - Toshiba TDP-TW95 | User Manual - Page 5
of the lamp only should be made by users.) a closed installation state. Do not place the product in a box or in any other closed installation state. Otherwise it may overheat. This could result in a risk of fire. 23. Do not look into the laser light source of the remote control or direct - Toshiba TDP-TW95 | User Manual - Page 6
Instruction Manual. • Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions arising from combination with equipment or software that is not related to Toshiba Corporation. • Toshiba of your projector. Model No • If the remote control does not operate - Toshiba TDP-TW95 | User Manual - Page 7
the "Projector Configuration Tool 77 Maintenance About lamp ...79 Lamp replacement 80 Lens and main unit cleaning 82 Others Trouble indications 83 Before calling service personnel 84 Specifications ...86 List of general specifications 86 Separately sold product 86 List of supported signals - Toshiba TDP-TW95 | User Manual - Page 8
■ (2) LR03 (SIZE AAA) batteries for remote control (2) ■ (3) CD-ROM ■ (4) Owner's Manual ■ (5) RGB cable (3m) ■ (6) Power cord (See note) ■ (7) Carrying bag ■ (8) Mouse remote control receiver ■ (9) Wireless LAN USB adapter • "About the Wireless LAN USB Adapter" Note The shape and number of - Toshiba TDP-TW95 | User Manual - Page 9
CLICK button : Functions as left-click of a mouse. p.20 (30) Remote control code switch : Sets the code of remote control to that of the projector. (inside the battery cover) p.43 Note • For the remainder of this manual, buttons are referred to as follows: Selection buttons ⇒ ; ENTER button - Toshiba TDP-TW95 | User Manual - Page 10
remote control ■ Loading dry-cell batteries into the remote control q Remove the battery cover. ■ Operating the remote control Turn on the ON/OFF switch of the remote control. Point toward the projector's infrared remote sensor, and press a button on the remote control. • Operating the projector - Toshiba TDP-TW95 | User Manual - Page 11
2000, or Windows® XP OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers. 1 Connecting a computer Connect the mouse - Toshiba TDP-TW95 | User Manual - Page 12
manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a - Toshiba TDP-TW95 | User Manual - Page 13
LAMP, and FAN. After a moment, the start-up screen appears. Control panel Remote Control Start-up screen CAUTION • Do not look into the lens while the lamp is on. The strong light from the lamp you will not be using the projector for an extended period. (When [Wireless standby] is [On], it - Toshiba TDP-TW95 | User Manual - Page 14
, the remote control's FOCUS and ZOOM buttons function as numeric keys, and therefore cannot be used to adjust the screen size or focus. In such a case, use the FOCUS and ZOOM buttons on the projector to make adjustment or retry after quitting the text entry screen. • Note that lamp characteristics - Toshiba TDP-TW95 | User Manual - Page 15
Image adjustment menu p.36 . Remote Control Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.87 , p.88 . • If auto setting fails adjustment, adjust manually with [Position] in the Image - Toshiba TDP-TW95 | User Manual - Page 16
arises, make correction manually. ■ Resizing image The projected image can be resized (zoomed in/out). 1 Press the remote control's RESIZE button. projector, overhead projector, etc. temporarily, this projector's images and sound can be turned off. Remote Control Press the remote control's - Toshiba TDP-TW95 | User Manual - Page 17
when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong - Toshiba TDP-TW95 | User Manual - Page 18
on the control panel (main unit side) and remote control. ■ How to use the menus The menu shown below is for operation instructions purposes and . • To return to previous item, press the RETURN button. • When Wireless/USB input is selected, pressing the MENU button displays the Setting display (2) - Toshiba TDP-TW95 | User Manual - Page 19
with . Phase Adjust to eliminate flicker. Computer Y/PB/PR Video S-video Wireless/ USB Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes position. Clamp 2 Adjusts the clamp pulse width. Computer Y/PB/PR Video S-video Wireless/ USB Yes No No No No Yes No No No No Yes No No No - Toshiba TDP-TW95 | User Manual - Page 20
wireless LAN USB adapter is connected to the projector. Selecting the "Full" mode allows the display in the same aspect ratio with that for the video signal. 38 Note • If you use the screen size setting function on commercial video software TOSHIBA is set for [Logo] by factory setting. • If user's - Toshiba TDP-TW95 | User Manual - Page 21
power Sets the lamp power. Low Standard Fan mode Sets the cooling fan speed. Standard High Wireless standby Switch on/off the wireless LAN while the projector is in standby. On Off Remote control When two or more projectors are used and controlled by the remote control respectively, this - Toshiba TDP-TW95 | User Manual - Page 22
mode. [Lamp power] When [Lamp power] is projector can be powered on using the remote control function of the Wireless Utility. When [Wireless standby] is set to [Off], the projector cannot be powered on with the remote control function of the Wireless Utility. [Remote control] Sets a remote control - Toshiba TDP-TW95 | User Manual - Page 23
may cause a malfunction or data corruption. Notes • The projector may not recognize a supported USB device. In such a case, unplug the USB device then re-plug it. • The USB terminal does not support the supplied mouse remote control receiver or a commercial mouse controller. • A USB hub is also - Toshiba TDP-TW95 | User Manual - Page 24
The following functions are available via wireless communications, when the wireless LAN USB adapter and dedicated Wireless Utility software p.63 included with this projector are used. Note: A wireless LAN USB adapter except the supplied one (or recommended by Toshiba) does not work with this - Toshiba TDP-TW95 | User Manual - Page 25
character.] DHCP: Use Not use IP address: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Subnet displayed via the projector (Update automatically) using Wireless Utility. Forbidden: Always ignores any remote commands from a - Toshiba TDP-TW95 | User Manual - Page 26
on individual items • [Easy Connect (USB memory)] This feature allows users to easily connect the projector to a computer over wireless networks, without making Network settings via Wireless Utility. • [Network settings] Your projector is set to Ad hoc in the factory. Change the setting if - Toshiba TDP-TW95 | User Manual - Page 27
Easy Connect utility p.68 allows users to easily connect the projector to a computer over wireless networks, without making network setting. For Easy Connect support, the computer requires a wireless LAN environment that is NDIS5.1 compliant. Refer to the user's manual supplied with the wireless LAN - Toshiba TDP-TW95 | User Manual - Page 28
projector does not support Toshiba IPCS060A series USB memory. Note that this projector does not support all USB memories, USB card readers/writers, and digital cameras. ■ Backing up data Toshiba recommends that you back up the data is inserted and input switches to Wireless/USB. At this time, the - Toshiba TDP-TW95 | User Manual - Page 29
preview. 56 ■ Playing a slide show from a thumbnail list With Auto. demo set to Off in "Setting slideshow options", data readout begins when a USB memory is inserted and the input switches to Wireless/USB. A list of thumbnails will then appear on the screen. The figure below is an example of this - Toshiba TDP-TW95 | User Manual - Page 30
the procedure in "Connecting USB device" p.45 . The projector starts loading data from the USB memory and displays a thumbnail list on animation effects and hyperlinks cannot be used, so it should be tested before the actual presentation. • Freeze function can not be supported. Operations 58 59 - Toshiba TDP-TW95 | User Manual - Page 31
remote control. Destination address: Enter a character string using numeric keys of the remote control. Confirm: [OK Cancel] ● Detailed description • [Unplug device] Run when unplugging a wireless running on the projector is displayed. (Examples: Slideshow, Wireless Utility) When no device - Toshiba TDP-TW95 | User Manual - Page 32
will appear on your computer's desktop: Wireless Utility → Operations p.63 JPEG Conversion Tool → Operations p.74 ■ How to uninstall Select [Start Menu] → [Settings] → [Control Panel] → [Add/Remove Programs], and remove Toshiba Data Projector and JPEG Conversion Tool from currently installed - Toshiba TDP-TW95 | User Manual - Page 33
projector. • The projector ID is the MAC address of the wireless LAN USB adapter inserted into the projector. • Playing contents protected by copyright is not supported image saved on a computer via the projector 1 Launch the Wireless Utility software application. The Screen Image transmission mode - Toshiba TDP-TW95 | User Manual - Page 34
Only one file can be sent at a time. To send another file, repeat steps 4 and 6 . ■ Displaying a video file saved on a computer via the projector 1 Launch the Wireless Utility software application. The Screen Image transmission mode window appears on the computer's screen. 2 Click on the icon. The - Toshiba TDP-TW95 | User Manual - Page 35
contents protected by copyright is not supported. ■ Easy Connect utility This feature allows users to easily connect the projector to a computer over wireless networks, without making Network settings via Wireless Utility. Launch the Wireless Utility software application and click the Tool button - Toshiba TDP-TW95 | User Manual - Page 36
. To unplug the USB memory, follow the instructions in the user s manual supplied with the USB memory or the computer. • Setting on the projector 5 Turn the projector power on. 6 Switch the input to Wireless/USB. 7 Insert the USB memory into the projector. A message appears, notifying that the - Toshiba TDP-TW95 | User Manual - Page 37
network settings manually. ■ Operating the projector This function can be used with any projector input. 1 Launch the Wireless Utility software application. The Screen Image transmission mode window appears on the computer's screen. 72 2 Click on the Remote Control button. The Remote Control window - Toshiba TDP-TW95 | User Manual - Page 38
, image files in other formats, Microsoft® PowerPoint® files, and the like into JPEG files supported by the projector. The JPEG files converted with this tool can be displayed by sending them using the wireless LAN p.65 , or saving them on a USB memory. ■ Launching the JPEG Conversion Tool The - Toshiba TDP-TW95 | User Manual - Page 39
the same network address as the projector. Note 2: If you use a proxy server, do not enable the proxy when accessing the above IP address. When the wireless LAN is set to use Ad hoc mode, use the WEB browser function in the Easy Connect menu of Wireless Utility. Note • This function can be enabled - Toshiba TDP-TW95 | User Manual - Page 40
page requires the input of the password. Wireless Utility: The items displayed on the screen can be set. Entering individual items and press the Execute button to update their setting. Note, however, that security items such as "Remote control" and "Browser authentication" cannot be set. Slide - Toshiba TDP-TW95 | User Manual - Page 41
. • When replacement is required, be sure to use: TLPLW9 for TDP-TW95 or TLPLW10 for TDP-TW100 (sold separately). CAUTION • If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it. • If - Toshiba TDP-TW95 | User Manual - Page 42
cloth, follow the precautions included with the cloth. 82 Trouble indications The indicator lights to inform you of internal abnormalities. No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer. (Off) (Red lit) (Red lit) Lamp went out during use, or won't come on - Toshiba TDP-TW95 | User Manual - Page 43
Is the lamp nearing the end of its service life? p.44 Control panel • Is the key lock function on? p.43 key doesn't work Remote control doesn't work • Is the remote control ON/OFF switch set off? p.19 • Is the remote control code identical with the projector's code? p.43 • Are the remote control - Toshiba TDP-TW95 | User Manual - Page 44
3.5mm dia. stereo mini-jack CONTROL terminal Mini DIN 8 pin (RS specifications that may be added in the future. ■ Separately sold product Replacement Lamp for TDP-TW95 Replacement Lamp for TDP-TW100 Model TLPLW9 Model TLPLW10 86 ■ List of supported signals (RGB signals) This projector supports - Toshiba TDP-TW95 | User Manual - Page 45
) ETX (03h) Only 1 command valid per communication. For input commands, only ASCII-compliant all-uppercase alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended ACK (06h) ESC (1Bh) ... Aborted No acknowledge NAK (15h) If commands are to be sent - Toshiba TDP-TW95 | User Manual - Page 46
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
 |
 |
Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
DATA PROJECTOR
TDP-TW95
TDP-TW100