Toshiba Tecra A2-S4372ST User Guide
Toshiba Tecra A2-S4372ST Manual
 |
View all Toshiba Tecra A2-S4372ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba Tecra A2-S4372ST manual content summary:
- Toshiba Tecra A2-S4372ST | User Guide - Page 1
Tecra® A2 Series User's Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see "If Something Goes Wrong" on page 185 in this guide. PMAD00010013 09/04 - Toshiba Tecra A2-S4372ST | User Guide - Page 2
you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed. If you fail to do so, this LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE - Toshiba Tecra A2-S4372ST | User Guide - Page 3
Critical applications" means life support systems, medical applications, connections loss of life or catastrophic property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL installed and used in accordance with the instructions, it may cause harmful interference to radio - Toshiba Tecra A2-S4372ST | User Guide - Page 4
device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class - Toshiba Tecra A2-S4372ST | User Guide - Page 5
to maintain uninterrupted service. If Problems Arise If this trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support - Toshiba Tecra A2-S4372ST | User Guide - Page 6
fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If above conditions may not prevent degradation of service in some situations. Repairs to certified electrician, as appropriate. 2 The user manual of analog equipment must contain the equipment - Toshiba Tecra A2-S4372ST | User Guide - Page 7
optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off your Bluetooth™ or Wireless LAN device. Please contact Toshiba PC product support on Web site http://www.toshibaeurope.com/computers/tnt/bluetooth.htm in Europe or http - Toshiba Tecra A2-S4372ST | User Guide - Page 8
of scientists who continually review and interpret the extensive where the risk of interference to other devices or services is perceived or identified as harmful. If you are TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer's instructions - Toshiba Tecra A2-S4372ST | User Guide - Page 9
is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et 826 General EMC requirements for radio equipment. English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares that this Radio - Toshiba Tecra A2-S4372ST | User Guide - Page 10
het toestel Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn - Toshiba Tecra A2-S4372ST | User Guide - Page 11
declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. TOSHIBA Corp. Digital Media Network Company declara que este Radio LAN device está conforme com os requisitos essenciais e outras disposições da - Toshiba Tecra A2-S4372ST | User Guide - Page 12
12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to - Toshiba Tecra A2-S4372ST | User Guide - Page 13
than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday - Friday: 10:00 - 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device - Toshiba Tecra A2-S4372ST | User Guide - Page 14
14 Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only Radio approvals - Toshiba Tecra A2-S4372ST | User Guide - Page 15
15 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is - Toshiba Tecra A2-S4372ST | User Guide - Page 16
outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult he local technical support staff responsible for the wireless network. ❖ The 5 GHz Turbo mode feature is not allowed for operation in any European Community country. - Toshiba Tecra A2-S4372ST | User Guide - Page 17
Access Point's radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation. Approved - Toshiba Tecra A2-S4372ST | User Guide - Page 18
18 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Austria Denmark Germany Italy Netherlands Portugal UK Belgium Finland Greece Liechtenstein New Zealand Sweden USA Turbo Mode (5 GHz) Canada USA Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN - Toshiba Tecra A2-S4372ST | User Guide - Page 19
Switzerland USA Belgium Finland Greece Ireland Liechtenstein Netherlands Philippines Spain Thailand Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping - Toshiba Tecra A2-S4372ST | User Guide - Page 20
or even lose your network connection. If you should experience any such problem, immediately turn off either one of your Bluetooth™ or Wireless LAN. Please contact Toshiba PC product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or http://www.pcsupport - Toshiba Tecra A2-S4372ST | User Guide - Page 21
deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that - Toshiba Tecra A2-S4372ST | User Guide - Page 22
during normal operation is minimized. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, the Bluetooth™ Card from TOSHIBA has to be operated while maintaining a minimum body to antenna which are located on top of LCD distance of 20 cm. Refer to - Toshiba Tecra A2-S4372ST | User Guide - Page 23
23 Taiwan Article 14 Article 17 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency - Toshiba Tecra A2-S4372ST | User Guide - Page 24
MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday - Friday: 10:00 - 17:00 Toll Free Tel: 0120-13 instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location - Toshiba Tecra A2-S4372ST | User Guide - Page 25
service station." To prevent direct exposure to the laser beam, do not try to open the enclosure. Use of controls or adjustments or performance of procedures other than those specified in the owner's manual may result in hazardous radiation exposure. Copyright This guide is copyrighted by Toshiba - Toshiba Tecra A2-S4372ST | User Guide - Page 26
OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Trademarks Tecra and Noteworthy are registered trademarks, FreedomWare and SmartMedia are trademarks, of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are - Toshiba Tecra A2-S4372ST | User Guide - Page 27
27 Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org. - Toshiba Tecra A2-S4372ST | User Guide - Page 28
Contents Introduction 36 This guide 37 Safety icons 38 Other icons used 39 Other documentation 39 Service options 40 Chapter 1: Getting Started 41 47 Setting up your software 48 Registering your computer with Toshiba 49 Setting up other devices 49 Connecting to a power source 49 Charging - Toshiba Tecra A2-S4372ST | User Guide - Page 29
using the recovery partition 64 Hard Disk Drive Recovery using the Recovery media 67 Deleting the Hard Disk Recovery Utility 70 Installing drivers and applications 71 Using the TouchPad 72 Scrolling with the TouchPad 73 Control buttons 73 Disabling or enabling the TouchPad 73 Turning - Toshiba Tecra A2-S4372ST | User Guide - Page 30
30 Contents Chapter 2: Learning the Basics 83 Computing tips 83 Using the keyboard 85 Character keys 85 Making your keyboard emulate a full-size key- board 86 Ctrl, Fn, and Alt keys 86 Function keys 86 Windows special keys 87 Overlay keys 87 Using the overlay to type numeric data 88 - Toshiba Tecra A2-S4372ST | User Guide - Page 31
31 Contents Using Hibernation 109 Using Standby 111 Toshiba's online resources 113 Chapter 3: Mobile Computing 114 Toshiba's energy-saver design 114 Running the computer on battery power 115 Battery Notice 115 Charging the batteries 116 Charging the main battery 117 Charging the - Toshiba Tecra A2-S4372ST | User Guide - Page 32
Connecting your computer to a network ........143 An overview of using the Internet 146 The Internet 146 The World Wide Web 146 Internet Service Providers 147 Connecting to the Internet 147 Surfing the Internet 148 Internet features 148 Uploading and downloading files from the Internet 149 - Toshiba Tecra A2-S4372ST | User Guide - Page 33
164 Changing or removing existing key assignments 164 TOSHIBA Console 165 Customizing Your Computer 166 Network 166 Security 166 TOSHIBA Power Saver 166 Mouse utility 168 Hotkey utility 169 TOSHIBA Mobile Extension 169 TOSHIBA HW Setup 171 Enabling Hibernation 173 Setting user - Toshiba Tecra A2-S4372ST | User Guide - Page 34
200 DVD-ROM or multi-function drive problems...202 Sound system problems 203 PC Card problems 203 Printer problems 206 Modem problems 207 Develop good computing habits 208 If you need further assistance 209 Before you call 209 Contacting Toshiba 210 Other Toshiba Internet Web sites 211 - Toshiba Tecra A2-S4372ST | User Guide - Page 35
or enabling the TouchPad 218 Keyboard hot keys 218 Appendix B: Power Cord/Cable Connectors 219 Appendix C: Using ConfigFree™ with your Toshiba Computer 220 Getting Started 221 Starting ConfigFree 221 ConfigFree Utilities 222 Connectivity Doctor 222 Search for Wireless Devices 225 Profile - Toshiba Tecra A2-S4372ST | User Guide - Page 36
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work can accompany you wherever you go. Tecra® A2 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any - Toshiba Tecra A2-S4372ST | User Guide - Page 37
, or to stay current with the various computer software or hardware options, visit Toshiba's Web site at pcsupport.toshiba.com. This guide This guide introduces the computer's features. You can: ❖ Read the entire guide from beginning to end ❖ Skim through and stop when a topic interests you ❖ Use - Toshiba Tecra A2-S4372ST | User Guide - Page 38
38 Introduction Safety icons Safety icons This manual contains safety instructions that must be observed in order to classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will - Toshiba Tecra A2-S4372ST | User Guide - Page 39
computer comes with the following documentation. ❖ This electronic user's guide. ❖ Guides for other programs that may come preinstalled on your computer or to your system). ❖ For accessory information, visit Toshiba's Web site at accessories.toshiba.com. ❖ The Microsoft® Windows® operating system - Toshiba Tecra A2-S4372ST | User Guide - Page 40
full line of optional service programs to complement its limited warranty. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to - Toshiba Tecra A2-S4372ST | User Guide - Page 41
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations. This section - Toshiba Tecra A2-S4372ST | User Guide - Page 42
out completely before turning it on again. If the computer does not operate properly after you turn it back on, contact a Toshiba service representative or your network administrator. ❖ Equipment that generates a strong electromagnetic field, such as large stereo speakers (other than speakers that - Toshiba Tecra A2-S4372ST | User Guide - Page 43
Getting Started Selecting a place to work 43 Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer. ❖ Place the computer on a flat surface at a comfortable height and distance - Toshiba Tecra A2-S4372ST | User Guide - Page 44
the pressure on the back of your thighs. ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖ Sit with your back straight so that your - Toshiba Tecra A2-S4372ST | User Guide - Page 45
Getting Started Selecting a place to work 45 Arms and wrists ❖ Avoid bending, arching, or twisting your wrists. Keep them in a relaxed, neutral position while typing. ❖ Exercise your hands, wrists and arms to improve circulation. Work habits The key to avoiding discomfort or injury from strain is - Toshiba Tecra A2-S4372ST | User Guide - Page 46
46 Getting Started Selecting a place to work Other precautions Your computer is designed to optimize safety, minimize strain, and withstand the rigors of portability. However, you should observe certain precautions to further reduce the risk of personal injury or damage to the computer. Do not - Toshiba Tecra A2-S4372ST | User Guide - Page 47
Getting Started Setting up your computer 47 NOTE The cooling fan location will vary depending on the computer. Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to "Setting up your software" on page 48 before adding external or internal components to your computer. - Toshiba Tecra A2-S4372ST | User Guide - Page 48
the order in which windows appear, may vary according to your software setup choices. The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. 1 From the welcome screen, click Next to enter the Setup Wizard. 2 Confirm acceptance of Microsoft's End - Toshiba Tecra A2-S4372ST | User Guide - Page 49
. If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty. Setting up other devices You may - Toshiba Tecra A2-S4372ST | User Guide - Page 50
always follow the steps in the exact order as described in the User's Manual. Connecting the power cord/cable to a live electrical outlet should be is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible - Toshiba Tecra A2-S4372ST | User Guide - Page 51
receiving input from the AC power supply. Disconnect the AC cable and remove the battery pack. See "If Something Goes Wrong" on page 185 for troubleshooting information. - Toshiba Tecra A2-S4372ST | User Guide - Page 52
52 Getting Started Charging the main battery Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cord/cable. If the power cord/cable becomes damaged or the plug overheats, discontinue use. There is a risk of - Toshiba Tecra A2-S4372ST | User Guide - Page 53
Getting Started Using the computer for the first time 53 NOTE Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the - Toshiba Tecra A2-S4372ST | User Guide - Page 54
the many possible icons that may come on your computer: Sample system icons This information applies to all the features and icons described in this guide. Turning on the power To turn on the computer: 1 Make sure any external devices (such as the AC adapter, if you plan to use AC - Toshiba Tecra A2-S4372ST | User Guide - Page 55
. Adding memory HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your Tecra® A2 Series computer comes with enough memory to run most of today's popular applications. You may want to increase the computer - Toshiba Tecra A2-S4372ST | User Guide - Page 56
Getting Started Adding memory For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You - Toshiba Tecra A2-S4372ST | User Guide - Page 57
Getting Started Adding memory 57 If the computer is on, begin at step 1; otherwise, skip to step 3. 1 If the computer is on, click Start, Turn off computer. The Turn off computer window appears. 2 Click Turn Off. The operating system turns off the computer. 3 Unplug and remove any cables connected - Toshiba Tecra A2-S4372ST | User Guide - Page 58
58 Getting Started Adding memory Memory module slot cover Sample removing the memory module slot cover 7 Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface - Toshiba Tecra A2-S4372ST | User Guide - Page 59
the memory module. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 11 Replace the memory module slot cover and screw. 12 Turn the computer over and restart it. You can now continue setting up the computer - Toshiba Tecra A2-S4372ST | User Guide - Page 60
60 Getting Started Adding memory Removing a memory module If you need to remove a memory module: 1 Complete steps 1-6 in ""Installing a memory module"" to shut down the computer and open the memory module slot cover. Do not try to remove a memory module with the computer turned on. You can damage - Toshiba Tecra A2-S4372ST | User Guide - Page 61
Getting Started Adding memory 61 Sample removing the memory module 4 Replace the memory module slot cover and screw. 5 Turn the computer over and restart it. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 Click - Toshiba Tecra A2-S4372ST | User Guide - Page 62
the factory-set default state without the HDD Recovery partition. ❖ Delete your hard disk drive recovery partition without the risk of losing your data ❖ Reinstall drivers and applications which were bundled with your computer. - Toshiba Tecra A2-S4372ST | User Guide - Page 63
the appropriate amount of CDs or DVDs to copy the Hard Drive Recovery Utilities. If your optical disk drive is not writable, contact TOSHIBA Customer Support to obtain the Recovery media for your system. To create recovery CDs/DVDs: 1 Double-click the Recovery Disc Creator icon on the Windows - Toshiba Tecra A2-S4372ST | User Guide - Page 64
copy by clicking the checkbox next to the item's Name - recovery files, applications (original bundled drivers and applications), or both the recovery files and applications. 4 Click Burn. 5 Insert the on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. - Toshiba Tecra A2-S4372ST | User Guide - Page 65
Getting Started Hard Drive Recovery Utilities 65 Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image (recommended) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard - Toshiba Tecra A2-S4372ST | User Guide - Page 66
any information on them will not be affected and remain intact. To recover only your C: drive: 1 Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process - Toshiba Tecra A2-S4372ST | User Guide - Page 67
page 63): ❖ Insert the first recovery CD or DVD into your CD/DVD drive and power on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. - Toshiba Tecra A2-S4372ST | User Guide - Page 68
68 Getting Started Hard Drive Recovery Utilities Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image (recommended) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard - Toshiba Tecra A2-S4372ST | User Guide - Page 69
any information on them will not be affected and remain intact. To recover only your C: drive: 1 Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process - Toshiba Tecra A2-S4372ST | User Guide - Page 70
70 Getting Started Hard Drive Recovery Utilities To recover your C: drive without the recovery partition: 1 Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all data will be lost - Toshiba Tecra A2-S4372ST | User Guide - Page 71
warning screen displays, click OK to confirm. Sample Delete Hard Disk Recovery Utility confirmation screen Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall - Toshiba Tecra A2-S4372ST | User Guide - Page 72
72 Getting Started Using the TouchPad™ 2 Click Next. 3 Click the item(s) you want to install. To select multiple items, hold down the Ctrl key as you make your selections. 4 Click Install. 5 Follow the on-screen prompts to complete the installation process. Using the TouchPad™ The TouchPad, the - Toshiba Tecra A2-S4372ST | User Guide - Page 73
down along the right edge of the TouchPad. To scroll horizontally, run your finger along the bottom edge of the TouchPad. Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click - Toshiba Tecra A2-S4372ST | User Guide - Page 74
74 Getting Started Using the TouchPad™ Sample TouchPAD ON/OFF screen 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. You can also use a hot key to - Toshiba Tecra A2-S4372ST | User Guide - Page 75
Getting Started Turning off the computer 75 Turning off the computer It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge - Toshiba Tecra A2-S4372ST | User Guide - Page 76
76 Getting Started Using external display devices Closing the display panel When you are finished, shut the computer down and close the display panel to keep dust and dirt out of the computer. If you close the computer while it is still on, these actions will occur: ❖ If you have the LCD power- - Toshiba Tecra A2-S4372ST | User Guide - Page 77
Getting Started Using external display devices 77 4 Set the display mode by pressing Fn + F5, or by configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display - Toshiba Tecra A2-S4372ST | User Guide - Page 78
modes, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 640 X 480 or higher. Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your - Toshiba Tecra A2-S4372ST | User Guide - Page 79
may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Never connect the printer cable while the computer's power is on. Doing so - Toshiba Tecra A2-S4372ST | User Guide - Page 80
80 Getting Started Connecting a local printer To achieve the connection, you need a suitable USB cable, which may come with your printer. You can purchase one from a computer or electronics store. To connect a USB printer: 1 Plug the USB connector into one of the USB ports on your computer 2 Plug - Toshiba Tecra A2-S4372ST | User Guide - Page 81
Started Connecting an optional external diskette drive 81 Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5inch diskettes. Sample optional external USB diskette drive To connect an - Toshiba Tecra A2-S4372ST | User Guide - Page 82
82 Getting Started Connecting external speakers or headphones Connecting external speakers or headphones To attach an external stereo output device: 1 Locate the headphone jack near the front of the right side of the computer. 2 Using any necessary adapters, plug the cable from the external audio - Toshiba Tecra A2-S4372ST | User Guide - Page 83
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer's temporary memory until you save it to the disk. If the network you are using goes down and you - Toshiba Tecra A2-S4372ST | User Guide - Page 84
84 Learning the Basics Computing tips See "Saving your work" on page 93 for further information. HINT: Some programs have an automatic save feature that can be activated. This feature saves your file to the hard disk at preset intervals. See your software documentation for details. ❖ Back up your - Toshiba Tecra A2-S4372ST | User Guide - Page 85
Learning the Basics Using the keyboard 85 "Powering down the computer" on page 106 to learn more about Standby. NOTE The Windows® XP operating system records information, such as your desktop setup, during its shutdown procedure. If you do not let the Windows® XP operating system shut down - Toshiba Tecra A2-S4372ST | User Guide - Page 86
86 Learning the Basics Using the keyboard Making your keyboard emulate a full-size keyboard Although your computer's keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. A standard full-size keyboard has two Enter, Ctrl, and Alt keys; editing keys; cursor - Toshiba Tecra A2-S4372ST | User Guide - Page 87
Learning the Basics Using the keyboard 87 F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, function keys marked with icons execute specific functions on the computer. For example, Fn+F9 turns off the TouchPad. For - Toshiba Tecra A2-S4372ST | User Guide - Page 88
88 Learning the Basics Using the keyboard Sample numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric mode light on the - Toshiba Tecra A2-S4372ST | User Guide - Page 89
Learning the Basics Starting a program 89 To disable the numeric overlay, hold down the Fn key and press F11 again. The numeric mode light on the keyboard indicator panel goes out. Using the overlay for cursor control The keys with the gray arrows and symbols on their left front are the cursor - Toshiba Tecra A2-S4372ST | User Guide - Page 90
90 Learning the Basics Starting a program ❖ Use Windows® Explorer or My Computer to locate the program file ❖ Use the Run dialog box The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install - Toshiba Tecra A2-S4372ST | User Guide - Page 91
Learning the Basics Starting a program 91 This example opens WordPad using its file name, wordpad.exe. 1 Click Start, then point to All Programs. 2 Click Accessories. 3 Click Windows Explorer. 4 Click My Computer to expand the window. 5 In the left part of the window, under the C: icon, double- - Toshiba Tecra A2-S4372ST | User Guide - Page 92
92 Learning the Basics Starting a program Sample Run dialog box 2 In the Run dialog box: ❖ If you know the program's location, type the command line. For a program in the Windows® folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: c:\ - Toshiba Tecra A2-S4372ST | User Guide - Page 93
Learning the Basics Saving your work 93 Saving your work Before you turn off the computer, save your work on the hard disk drive or diskette/CD. This is one of the most important rules of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in case the main - Toshiba Tecra A2-S4372ST | User Guide - Page 94
file you are currently working with, choose Save As from the File menu and give the new file a different name. The Windows® XP operating system supports file names of up to 255 characters; the names can include spaces. Some applications still require MS-DOS® file names. File names If you plan - Toshiba Tecra A2-S4372ST | User Guide - Page 95
Learning the Basics Printing your work 95 Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft® Word saves files with a .doc extension. Any file name with an extension of - Toshiba Tecra A2-S4372ST | User Guide - Page 96
has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround - Toshiba Tecra A2-S4372ST | User Guide - Page 97
DVD performance, it is recommended that you play CDs and DVDs while running the computer on AC power. Drive in-use indicator light Eject button Manual eject hole Sample DVD-ROM drive Drive in-use indicator light-Indicates when the drive is in use. Eject button-Press to release the disc - Toshiba Tecra A2-S4372ST | User Guide - Page 98
-Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole. Never use a pencil to press the eject button. Pencil lead can break off inside the computer and damage it - Toshiba Tecra A2-S4372ST | User Guide - Page 99
on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to - Toshiba Tecra A2-S4372ST | User Guide - Page 100
cover. 3 Gently push the tray in to close it. Removing a disc with the computer off 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. 2 Gently pull the tray out until it is fully open, remove the disc, and place it in its protective cover. 3 Gently push the - Toshiba Tecra A2-S4372ST | User Guide - Page 101
101 Learning the Basics Using PC Cards ❖ Do not expose discs to direct sunlight or extreme heat or cold. ❖ To clean a disc that is dirty, wipe it with a clean, dry cloth. The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge (not in a circle). - Toshiba Tecra A2-S4372ST | User Guide - Page 102
102 Learning the Basics Using your computer at the office ❖ Do not remove a SCSI card while any of the SCSI devices connected to it are operating. Before removing a PC Card, stop it by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. - Toshiba Tecra A2-S4372ST | User Guide - Page 103
chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. - Toshiba Tecra A2-S4372ST | User Guide - Page 104
Disk Drive Recovery Utilities that enable you to reinstall software that was preinstalled. This can be used to install or reinstall particular Toshiba applications, utilities, and drivers. For more information, see "Hard Drive Recovery Utilities" on page 62. Back up all the files you create in case - Toshiba Tecra A2-S4372ST | User Guide - Page 105
lines with another computer, you need: ❖ A modem (supplied with your computer) ❖ A telephone line ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or an online service if you plan to use the Internet Before you can use the modem, you must connect it to a standard voice - Toshiba Tecra A2-S4372ST | User Guide - Page 106
106 Learning the Basics Powering down the computer Powering down the computer NOTE Pushing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panel's disk light and the drive-in use light are off. If you turn off - Toshiba Tecra A2-S4372ST | User Guide - Page 107
the power button. To use either of these methods, you first need to turn it on in Toshiba's Power Saver utility. 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click on the Setup Action tab. 4 Select the options you want from the - Toshiba Tecra A2-S4372ST | User Guide - Page 108
Basics Powering down the computer 5 Click Apply. 6 Click OK. Sample system power mode settings NOTE For more information about the Power Saver utility, see "TOSHIBA Power Saver" on page 166. Starting again after Shut down To start the computer up again, press the power button until the on/off - Toshiba Tecra A2-S4372ST | User Guide - Page 109
and files you were using Configuring your computer for Hibernation 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click the Setup Action tab. 4 Select Hibernation for the options you want. ❖ When I press the power button Set this - Toshiba Tecra A2-S4372ST | User Guide - Page 110
computer is now set to automatically go into Hibernation when your option settings occur. NOTE For more information about the Power Saver utility, see "TOSHIBA Power Saver" on page 166. Once the computer is configured, put the computer into Hibernation mode by either pressing the power button or - Toshiba Tecra A2-S4372ST | User Guide - Page 111
111 Learning the Basics Powering down the computer Using Standby The Standby command puts the computer into a powersaving mode. Standby holds the current mode of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when - Toshiba Tecra A2-S4372ST | User Guide - Page 112
into Standby mode. To use any of these methods, you first need to enable them in Toshiba's Power Saver utility. 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click the Setup Action tab. 4 Select Standby for the options you want - Toshiba Tecra A2-S4372ST | User Guide - Page 113
the display panel, you can start it again by opening the display panel. Toshiba's online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future - Toshiba Tecra A2-S4372ST | User Guide - Page 114
in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer - Toshiba Tecra A2-S4372ST | User Guide - Page 115
stay current on the most recent software and hardware options for your computer, and for other product information, regularly check the Toshiba Web site at accessories.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month - Toshiba Tecra A2-S4372ST | User Guide - Page 116
a time. Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba's Web site at accessories - Toshiba Tecra A2-S4372ST | User Guide - Page 117
117 Mobile Computing Charging the batteries Charging the main battery To charge the battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on. TECHNICAL NOTE: The battery - Toshiba Tecra A2-S4372ST | User Guide - Page 118
118 Mobile Computing Charging the batteries The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERY BAD CHECKSUM (CMOS) CHECK SYSTEM NOTE The above error message may vary by computer model. The - Toshiba Tecra A2-S4372ST | User Guide - Page 119
, based on your current rate of power use. To show remaining power: 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. The Toshiba Power Saver Properties dialog box appears. - Toshiba Tecra A2-S4372ST | User Guide - Page 120
120 Mobile Computing Monitoring battery power Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, - Toshiba Tecra A2-S4372ST | User Guide - Page 121
power management options that can be accessed through an icon in the Control Panel. For more information, see "TOSHIBA Power Saver" on page 166. What to do when the battery alarm sounds Your Tecra® A2 Series computer can be configured to warn you of a low battery charge condition, so you can take - Toshiba Tecra A2-S4372ST | User Guide - Page 122
122 Mobile Computing Changing batteries Changing batteries When handling battery packs, do not drop or knock them. Also, be careful not to damage the casing or short-circuit the terminals. To change the battery: 1 Save your work. 2 Shut down and turn off the computer. 3 Remove all cables connected - Toshiba Tecra A2-S4372ST | User Guide - Page 123
123 Mobile Computing Changing batteries 6 Press the battery release latch to release the battery. Sample battery release latch 7 Pull the discharged battery out from the back of the computer. Sample removing the discharged battery If the battery is leaking or its case is cracked, put on protective - Toshiba Tecra A2-S4372ST | User Guide - Page 124
124 Mobile Computing Taking care of your battery 9 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the - Toshiba Tecra A2-S4372ST | User Guide - Page 125
gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through to Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be - Toshiba Tecra A2-S4372ST | User Guide - Page 126
126 Mobile Computing Taking care of your battery 3 Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to - Toshiba Tecra A2-S4372ST | User Guide - Page 127
is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state - Toshiba Tecra A2-S4372ST | User Guide - Page 128
time of your battery: ❖ Enable Standby or Hibernation, which saves power when you turn off the computer and turn it back on again. ❖ Use Toshiba's power-saving options. These power-saving options control the way in which the computer is configured. By using them, you can greatly increase the length - Toshiba Tecra A2-S4372ST | User Guide - Page 129
own combination of power management options. To do this: 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click on the Toshiba Power Saver icon. 3 Select an appropriate profile for your work environment, or create your own custom profile. 4 For more information, see - Toshiba Tecra A2-S4372ST | User Guide - Page 130
from external power sources, the capacity of one battery pack may be sufficient for your needs. However, if you need more portable power, Toshiba provides these options: ❖ Purchase extra battery packs. ❖ Purchase a battery charger that charges one main battery pack and one secondary battery pack at - Toshiba Tecra A2-S4372ST | User Guide - Page 131
were a standard office computer. You can connect any of these optional devices: ❖ Expansion memory modules ❖ Standard 101-key keyboard ❖ Mouse or trackball ❖ Printer ❖ PC Cards ❖ Toshiba Advanced Port Replicator III Some of these devices listed are - Toshiba Tecra A2-S4372ST | User Guide - Page 132
can be purchased through Toshiba's Web site: accessories.toshiba.com, or through the accessories information packaged with your computer. Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer's USB ports supports any USB-compatible - Toshiba Tecra A2-S4372ST | User Guide - Page 133
as a translator that turns your document into a form the printer can understand. If you are using any non-Windows® programs, set up a printer driver for each of those programs. Refer to your program's documentation for more information. TECHNICAL NOTE: If you have the manufacturer's disk that came - Toshiba Tecra A2-S4372ST | User Guide - Page 134
is Plug and Play, the Windows® XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. 4 If the printer you are setting up: ❖ Is not connected to a network, select Local printer attached to this computer. ❖ Is connected to a network - Toshiba Tecra A2-S4372ST | User Guide - Page 135
135 Expansion Options Using a printer 6 Select the port settings according to the instructions in your printer's documentation and the port to which your printer is connected, then click Next. The wizard prompts you to select your printer. 7 From - Toshiba Tecra A2-S4372ST | User Guide - Page 136
guide for further instructions. Using the Wi-Fi® Wireless LAN Mini PCI module Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service - Toshiba Tecra A2-S4372ST | User Guide - Page 137
137 Expansion Options Using an expansion device For more information, see the accessories information package that comes with the device or visit accessories.toshiba.com. - Toshiba Tecra A2-S4372ST | User Guide - Page 138
, you will explore some of the special features of your Tecra® A2 Series notebook computer. Exploring the desktop The desktop is the and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. The - Toshiba Tecra A2-S4372ST | User Guide - Page 139
139 Enhancing Productivity Exploring the desktop Finding your way around the desktop Your computer's desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Taskbar System tray Sample Windows® XP operating system desktop - Toshiba Tecra A2-S4372ST | User Guide - Page 140
140 Enhancing Productivity Exploring the desktop Recycle Bin - Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, - Toshiba Tecra A2-S4372ST | User Guide - Page 141
141 Enhancing Productivity Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the - Toshiba Tecra A2-S4372ST | User Guide - Page 142
with your Tecra® A2 Series computer) ❖ A telephone line ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or online service if you to support you if you need to either upgrade your modem or reset the port to the default settings. If you are having trouble connecting through - Toshiba Tecra A2-S4372ST | User Guide - Page 143
displays identifying information reported by the modem. If Windows XP cannot communicate with the modem, it displays an error message. Consult the troubleshooting sections of your modem and Windows XP documentation. 8 Click OK to close the properties dialog box for that specific modem. 9 Click OK - Toshiba Tecra A2-S4372ST | User Guide - Page 144
144 Enhancing Productivity Setting up for communications connecting to the network, consult your network administrator. ❖ While you are at home or traveling, you need a dial-up connection. Ask your network administrator for the telephone number of the network. Setting up the connection To set up an - Toshiba Tecra A2-S4372ST | User Guide - Page 145
145 Enhancing Productivity Setting up for communications 4 Click Actions. 5 Select the Properties icon. 6 Select the Do not use this device (disable) option from the Device usage drop-down. 7 Click OK. Your LAN port is now disabled. To enable the Ethernet LAN port, repeat steps one through four. - Toshiba Tecra A2-S4372ST | User Guide - Page 146
introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading and downloading files from the Internet The Internet The Internet - Toshiba Tecra A2-S4372ST | User Guide - Page 147
telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account The Microsoft® Web browser Internet Explorer is automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists you - Toshiba Tecra A2-S4372ST | User Guide - Page 148
. If you have an account with an ISP, you can probably set up an email address at the same time you sign up for the service. ❖ Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one - Toshiba Tecra A2-S4372ST | User Guide - Page 149
features clearinghouse where all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale. Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading (transferring data - Toshiba Tecra A2-S4372ST | User Guide - Page 150
150 Enhancing Productivity Exploring audio features NOTE When using Windows Media Player, your system may not be able to activate Standby or Hibernation modes. To prevent this from occurring, close Windows Media Player before you select Standby or Hibernation mode. Sample Windows Media Player - Toshiba Tecra A2-S4372ST | User Guide - Page 151
you insert a CD into the DVD-ROM/multi-function drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually. To do this, follow these steps: 1 Open the Start menu and select My Computer. 2 Click the DVD-ROM/multi-function drive icon. The disk drive - Toshiba Tecra A2-S4372ST | User Guide - Page 152
152 Enhancing Productivity Exploring audio features Recording sounds You may record sounds as .wav files by connecting an external microphone or other sound source to the microphone jack. DEFINITION: A .wav (pronounced "wave") file is a Windows® format for storing sound. TECHNICAL NOTE: If you - Toshiba Tecra A2-S4372ST | User Guide - Page 153
153 Enhancing Productivity Exploring audio features The Sound Recorder window displays the new sound file as a waveform. NOTE You can only record 60 seconds at a time. 6 To hear what you just recorded, click the Play button. 7 To save the file, select Save from the File menu. Adjusting recording - Toshiba Tecra A2-S4372ST | User Guide - Page 154
speakers, use the volume controls on each speaker. ❖ For headphones, use the computer's volume control dial. Inserting and removing hard drives Your Tecra® A2 can use various hard drive capacities. Depending upon the original hard drive installed in your computer, you may wish to increase storage - Toshiba Tecra A2-S4372ST | User Guide - Page 155
155 Enhancing Productivity Inserting and removing hard drives Sample removing the hard drive cover screw 6 Lift the edge of the hard drive cover and lift it up to expose the hard drive. 7 Grasp the edge of the hard drive and pull it toward the edge of the computer, then lift it straight up to remove - Toshiba Tecra A2-S4372ST | User Guide - Page 156
the hard drive cover and tighten the screw removed as previously mentioned in step 5. Inserting and removing PC Cards Your Tecra® A2 Series computer comes with one PC Card slot and supports two types of PC Cards: ❖ Type I cards-You can install one of these cards. ❖ Type II cards-You can install - Toshiba Tecra A2-S4372ST | User Guide - Page 157
157 Enhancing Productivity Inserting and removing PC Cards To insert a PC Card: 1 Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. 2 Locate the PC Card slot on - Toshiba Tecra A2-S4372ST | User Guide - Page 158
PC Card, refer to the documentation that came with the card or refer to your operating system manual or online help. Connecting your modem to a telephone line Your computer comes with a built-in . For more detailed information regarding your computer's modem, visit Toshiba's Web site at accessories - Toshiba Tecra A2-S4372ST | User Guide - Page 159
a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet. For more information on using a modem, see "Setting up for communications" on page 142. - Toshiba Tecra A2-S4372ST | User Guide - Page 160
details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ Fn-esse® ❖ Hotkey utility ❖ TOSHIBA Console ❖ TOSHIBA HW Setup ❖ TOSHIBA Power Saver ❖ Enabling Hibernation ❖ Setting a user password ❖ Using a supervisor password ❖ Using the - Toshiba Tecra A2-S4372ST | User Guide - Page 161
Utilities Fn-esse® Fn-esse® Desktop shortcuts and Toshiba's Fn-esse program provide quick ways to open programs, documents, and or a keyboard overlay. Starting Fn-esse® Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window - Toshiba Tecra A2-S4372ST | User Guide - Page 162
162 Toshiba Utilities Fn-esse® The keys are color-coded as follows: ❖ Available To assign a key to a program or document: 1 Start both Fn-esse and Windows® Explorer (or the program supporting drag-and-drop). 2 Resize the Explorer window so that you can see both the Fn-esse keyboard and Explorer at - Toshiba Tecra A2-S4372ST | User Guide - Page 163
163 Toshiba Utilities Fn-esse® The program or document is now associated with the key you just selected. To open the program or document, press Fn plus - Toshiba Tecra A2-S4372ST | User Guide - Page 164
164 Toshiba Utilities Fn-esse® Making a popup assignment 1 Select Popup... to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application - Toshiba Tecra A2-S4372ST | User Guide - Page 165
, click Direct... or Popup... and continue as if you were creating a new assignment. ❖ To remove the key assignment, click Clear. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel - Toshiba Tecra A2-S4372ST | User Guide - Page 166
Network The Network category features Connectivity Doctor. Security The features available in this category are: ❖ Supervisor password ❖ User password TOSHIBA Power Saver The TOSHIBA Power Saver feature enables you to control your computer's power usage, regardless of the source, and use the many - Toshiba Tecra A2-S4372ST | User Guide - Page 167
preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either - Toshiba Tecra A2-S4372ST | User Guide - Page 168
168 Toshiba Utilities TOSHIBA Console ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life Although you can change the properties for any of these profiles utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Console, double-click the Mouse icon. - Toshiba Tecra A2-S4372ST | User Guide - Page 169
utility window 2 Select the desired option. 3 Click OK. TOSHIBA Mobile Extension To adjust the settings for docking or using the Slim SelectBay, use the TOSHIBA Mobile Extension Service Configuration. To use the TOSHIBA Mobile Extension Service Configuration: 1 Click Start, then Control Panel, then - Toshiba Tecra A2-S4372ST | User Guide - Page 170
tab, you can select behaviors to enable or disable, like Warm Undock Service and Notification Messages, by checking or unchecking the appropriate box. Sample TOSHIBA Mobile Extension Service tab options 4 Under the Display Change Service tab, you can set the default display configuration you wish to - Toshiba Tecra A2-S4372ST | User Guide - Page 171
171 Toshiba Utilities TOSHIBA Console Sample Display Change Service tab options TOSHIBA HW Setup TOSHIBA HW Setup is the Toshiba configuration management tool available through Windows. To access it, open the Start menu, click Control Panel, then Printers and Other Hardware. Then click the Toshiba - Toshiba Tecra A2-S4372ST | User Guide - Page 172
172 Toshiba Utilities TOSHIBA Console Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: ❖ General-Allows you to view current BIOS, hard disk drive and memory settings ❖ Password-Allows - Toshiba Tecra A2-S4372ST | User Guide - Page 173
173 Toshiba Utilities Enabling Hibernation ❖ AC Power-If your computer is connected to the AC change will become default settings when you restart your system. Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You - Toshiba Tecra A2-S4372ST | User Guide - Page 174
leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports the several types of passwords on your computer: ❖ An instant password - Secures your open programs and files when leaving the computer temporarily - Toshiba Tecra A2-S4372ST | User Guide - Page 175
To register a password for the power-on password functions: 1 Click Start, then click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. 3 On the left side, select Security. 4 Select the User Password icon. 5 Click Set - Toshiba Tecra A2-S4372ST | User Guide - Page 176
user password To cancel the power-on password function: 1 Click Start, then click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. 3 On the left side, select Security. 4 Select the User Password icon. 5 Select Verify by - Toshiba Tecra A2-S4372ST | User Guide - Page 177
Utilities Using a supervisor password Sample TOSHIBA Console Security window 4 Select the Supervisor Password icon. 5 Click password function: 1 Click Start, then click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. - Toshiba Tecra A2-S4372ST | User Guide - Page 178
. 7 Type the correct password. 8 Click Verify. 9 Click Delete. 10 Select Verify by Password. 11 Type the correct password. 12 Click Verify. Using the TOSHIBA Zooming Utility This utility allows you zoom in and zoom out of applications as well as the icons for Microsoft® Internet Explorer, Microsoft - Toshiba Tecra A2-S4372ST | User Guide - Page 179
Touch and Launch utility The TOSHIBA Zooming Utility screen appears. Sample TOSHIBA Zooming Utility screen Using the TOSHIBA Touch and Launch utility TOSHIBA Touch and Launch is a program that adds features to the TouchPad. For example, by selecting an icon you can: ❖ Open a document ❖ Launch - Toshiba Tecra A2-S4372ST | User Guide - Page 180
to choose the icon's function. If the icon is highlighted in orange and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window closes. If the icon is highlighted in blue and selected, the function corresponding to the selected icon launches and the - Toshiba Tecra A2-S4372ST | User Guide - Page 181
of the corner icons. The type and number of icons you see in the main part of the TOSHIBA Touch and Launch window are determined by which of the corner icons you select. TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color - Toshiba Tecra A2-S4372ST | User Guide - Page 182
the functions/ features you can access in TOSHIBA Touch and Launch ❖ Disable/Enable ❖ Help ❖ About TOSHIBA Touch and Launch Settings When you choose the Settings shortcut menu entry, the TOSHIBA Touch and Launch Settings window appears. Sample TOSHIBA Touch and Launch Settings window In the Corner - Toshiba Tecra A2-S4372ST | User Guide - Page 183
and Launch feature. You can also disable/enable TOSHIBA Touch and Launch via the TOSHIBA Touch and Launch icon on the system tray. TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer - Toshiba Tecra A2-S4372ST | User Guide - Page 184
184 Toshiba Utilities TOSHIBA Application Installer Sample TOSHIBA Application Installer screen 3 Click the item(s) you want to install. To select multiple items, hold down the Ctrl key as you make your selections. Sample TOSHIBA Application Installer selection screen 4 Click Install. 5 Follow the - Toshiba Tecra A2-S4372ST | User Guide - Page 185
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba's support services at the end of this chapter. Problems that are easy to fix Your program stops responding - Toshiba Tecra A2-S4372ST | User Guide - Page 186
and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. 2 Press Ctrl and c simultaneously to copy the text to the clipboard. 3 Open Notepad (click Start, point to All Programs, then point to - Toshiba Tecra A2-S4372ST | User Guide - Page 187
. You are probably in Stand By mode and have a software or resource conflict. When this happens, turning the power on returns you to the problem instead of restarting the system. To clear the condition, press Ctrl, Alt, and Del simultaneously. Clearing the condition may get the computer running, but - Toshiba Tecra A2-S4372ST | User Guide - Page 188
time to start. ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these - Toshiba Tecra A2-S4372ST | User Guide - Page 189
change your system's configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. This known good configuration (your most recent settings that worked) ❖ Directory Services Restore Mode (Windows® domain controllers only) ❖ Debugging Mode ❖ Start - Toshiba Tecra A2-S4372ST | User Guide - Page 190
. Try again later. The Windows® XP operating system can help you If the operating system has started properly, but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem. To access Windows® XP Help and Support: 1 Click Start, then click Help and - Toshiba Tecra A2-S4372ST | User Guide - Page 191
-screen instructions. You can connect to Support Online by clicking Support from the menu. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows® Help and Support to troubleshoot the problem first - Toshiba Tecra A2-S4372ST | User Guide - Page 192
192 If Something Goes Wrong Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work. The device most recently - Toshiba Tecra A2-S4372ST | User Guide - Page 193
" below. ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device's documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the - Toshiba Tecra A2-S4372ST | User Guide - Page 194
drive, diskette disk drive, and other power-using functions. ❖ The Drivers tab, which displays the drivers being used by the device. A Troubleshooting button is also present. 7 Click troubleshooting. A Help and Support window for that device appears. For more information about Device Manager, refer - Toshiba Tecra A2-S4372ST | User Guide - Page 195
automatically. 3 Remove the memory module. 4 Reinstall the memory module, following the instructions in "Adding memory" on page 55, and making sure it is seated (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cord - Toshiba Tecra A2-S4372ST | User Guide - Page 196
196 If Something Goes Wrong Resolving a hardware conflict Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adapter and power cord/cable. Make - Toshiba Tecra A2-S4372ST | User Guide - Page 197
and F10 simultaneously to turn off the cursor control light or press Fn and F11 simultaneously to turn off the numeric keypad light. If the problem occurs when both the keypad overlays are off, make sure the software you are using is not remapping the keyboard. Refer to the software's documentation - Toshiba Tecra A2-S4372ST | User Guide - Page 198
198 If Something Goes Wrong Resolving a hardware conflict You may have activated the instant password feature by pressing Fn and F1 simultaneously. If you have registered a password, press the Enter key, type the password, and press Enter. If no password is registered, press Enter. The screen - Toshiba Tecra A2-S4372ST | User Guide - Page 199
information, see Windows® Help. A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode. Small bright dots - Toshiba Tecra A2-S4372ST | User Guide - Page 200
usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are - Toshiba Tecra A2-S4372ST | User Guide - Page 201
data using utility software, which is available from your dealer. Some programs run correctly but others do not. This is probably a configuration problem. If a program does not run properly, refer to its documentation and check that the hardware configuration meets its needs. A diskette will not - Toshiba Tecra A2-S4372ST | User Guide - Page 202
the second diskette, the first diskette (not the drive) is probably causing the problem. Run Error-checking on the faulty diskette (for instructions, see "Disk drive problems" on page 200). DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has - Toshiba Tecra A2-S4372ST | User Guide - Page 203
manual eject button. This button is in the small hole next to the disc eject button on the right side of the computer. Some discs run correctly, but others do not. If the problem . Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more - Toshiba Tecra A2-S4372ST | User Guide - Page 204
with the PC Card. Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers for your PC Card and the card did not come with an - Toshiba Tecra A2-S4372ST | User Guide - Page 205
The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket to make sure each device has its own I/O base address. See "Fixing a problem with Device Manager" on page 193 for more information. Since all PC Cards - Toshiba Tecra A2-S4372ST | User Guide - Page 206
documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems: The printer will not to check for any problem with the printer itself. Make sure you installed the proper printer drivers, as shown in "Setting up your printer" - Toshiba Tecra A2-S4372ST | User Guide - Page 207
it will print. Contact the software manufacturer for more information. Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the . Refer to the program's documentation and the modem manual for information on how to change these settings. - Toshiba Tecra A2-S4372ST | User Guide - Page 208
programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See "Computing tips" on page 83 for instructions. On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to CD/DVD - Toshiba Tecra A2-S4372ST | User Guide - Page 209
before contacting Toshiba: ❖ Review the troubleshooting information in your operating system documentation. ❖ If the problem occurs while you are running a program, consult the program's documentation for troubleshooting suggestions. Contact the software company's technical support group for - Toshiba Tecra A2-S4372ST | User Guide - Page 210
along with its installation media. ❖ Information about what you were doing when the problem occurred. ❖ Exact error messages and when they occurred. For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859 - Toshiba Tecra A2-S4372ST | User Guide - Page 211
211 If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Worldwide Toshiba corporate site Marketing and product information in the - Toshiba Tecra A2-S4372ST | User Guide - Page 212
92618 USA 800-457-7777 (within the US) 949-859-4273 (outside of the US this call may incur long-distance charges) Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain United States - Toshiba Tecra A2-S4372ST | User Guide - Page 213
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. - Toshiba Tecra A2-S4372ST | User Guide - Page 214
are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, see "Mobile Computing" on page 114. - Toshiba Tecra A2-S4372ST | User Guide - Page 215
215 Hot Keys Stand By mode Stand By mode Fn + This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more - Toshiba Tecra A2-S4372ST | User Guide - Page 216
216 Hot Keys Hibernation mode Hibernation mode Fn + This hot key puts the computer into Hibernation mode. If Hibernation mode is enabled (the default), a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display. - Toshiba Tecra A2-S4372ST | User Guide - Page 217
217 Hot Keys Display modes Display modes Fn + This hot key cycles through the power-on display options. The display modes are: ❖ Built-in display panel only ❖ Built-in display panel and external monitor simultaneously ❖ External monitor only Sample display options window In order to use a - Toshiba Tecra A2-S4372ST | User Guide - Page 218
218 Hot Keys Display brightness Display brightness Fn + This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness. Disabling or enabling the TouchPad Fn + This hot key enables/disables the TouchPad. To use the TouchPad, see "Disabling or enabling the - Toshiba Tecra A2-S4372ST | User Guide - Page 219
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved Australia AS approved - Toshiba Tecra A2-S4372ST | User Guide - Page 220
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication - Toshiba Tecra A2-S4372ST | User Guide - Page 221
XP or 2000) Click the Start button, and select All Programs, TOSHIBA, Networking, ConfigFree. ❖ Double-click the ConfigFree icon on the taskbar. ❖ Press the Toshiba Console button (if applicable to your system) to open the Toshiba Console, and then click the ConfigFree icon. ❖ Click the ConfigFree - Toshiba Tecra A2-S4372ST | User Guide - Page 222
™ with your Toshiba Computer ConfigFree Utilities Wireless LAN Bluetooth Connectivity Doctor Profiles Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity - Toshiba Tecra A2-S4372ST | User Guide - Page 223
223 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as - Toshiba Tecra A2-S4372ST | User Guide - Page 224
224 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem, or potential problem, is detected, a triangle containing an exclamation location. You can then view a possible cause and solution for the problem by clicking the exclamation point. For example, if the connection to a - Toshiba Tecra A2-S4372ST | User Guide - Page 225
225 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices and Bluetooth devices currently used in the - Toshiba Tecra A2-S4372ST | User Guide - Page 226
226 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As with the Wi-Fi - Toshiba Tecra A2-S4372ST | User Guide - Page 227
227 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 2 Click your own computer at the center of the map. 3 Configured devices are automatically connected. Devices not yet configured launch the Add - Toshiba Tecra A2-S4372ST | User Guide - Page 228
228 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Personal firewall settings for Internet connections. ❖ Dial-up connection settings for the default connection. ❖ File and printer sharing settings. ❖ Printer settings for - Toshiba Tecra A2-S4372ST | User Guide - Page 229
profiles, refer to the online help. Quick Connect The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application. There - Toshiba Tecra A2-S4372ST | User Guide - Page 230
the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and reestablished later. To review the current Toshiba Wireless Projector settings and change them if necessary: 1 Click the icon in the system tray. 2 Move the mouse pointer to - Toshiba Tecra A2-S4372ST | User Guide - Page 231
231 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Projector icon when connected with before the Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this - Toshiba Tecra A2-S4372ST | User Guide - Page 232
232 Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is - Toshiba Tecra A2-S4372ST | User Guide - Page 233
233 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification - Toshiba Tecra A2-S4372ST | User Guide - Page 234
TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user's guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-ROM compact disc read-only memory CD-RW - Toshiba Tecra A2-S4372ST | User Guide - Page 235
disk drive HTML Hypertext Markup Language IEEE Institute of Electrical and Electronics Engineers I/O input/output IRQ interrupt request ISP Internet service provider KB kilobyte LAN local area network LCD liquid crystal display LPT1 line printer port 1 (parallel port) LSI large - Toshiba Tecra A2-S4372ST | User Guide - Page 236
film transistor universal serial bus uniform resource locator wide area network World Wide Web Terms These terms may appear in this user's guide. A active-matrix display - A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as - Toshiba Tecra A2-S4372ST | User Guide - Page 237
signal changes per second (not necessarily the same as bits per second). See also bits per second. BIOS (basic input/output system) - Basic instructions, stored in readonly memory (ROM), containing the information the computer needs in order to check hardware and load the operating system when you - Toshiba Tecra A2-S4372ST | User Guide - Page 238
238 Glossary byte - A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. C cache - A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than - Toshiba Tecra A2-S4372ST | User Guide - Page 239
the CPU and the computer's main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, drives, and modems are examples of devices. device driver - A program (called a "driver") that permits a computer to communicate with a device - Toshiba Tecra A2-S4372ST | User Guide - Page 240
cursor to drag a selected object. In the Windows® operating system, this refers to the primary TouchPad control button or left mouse button, unless otherwise stated. driver - See device driver. DVD - An individual digital versatile (or video) disc. See also DVDROM. - Toshiba Tecra A2-S4372ST | User Guide - Page 241
241 Glossary DVD-ROM (digital versatile [or video] disc read-only memory) - A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. E emulation - A technique in which a device or program imitates another - Toshiba Tecra A2-S4372ST | User Guide - Page 242
default, the hard disk is referred to as drive C. hardware - The physical components of a computer system. Compare software. Hibernation - A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn - Toshiba Tecra A2-S4372ST | User Guide - Page 243
. internal device - See device. Internet - The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. K keyboard shortcut - A key or combination of keys that you use to perform a task instead of using - Toshiba Tecra A2-S4372ST | User Guide - Page 244
244 Glossary local area network - See LAN. logical drive - A section of a disk that is recognized by the operating system as a separate disk drive. A system's logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical - Toshiba Tecra A2-S4372ST | User Guide - Page 245
245 Glossary non-interlaced - A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk - A disk for storing programs and data that cannot be used to start the computer. - Toshiba Tecra A2-S4372ST | User Guide - Page 246
you plug in a cable for connection to a network or a peripheral device. processor - See central processing unit (CPU). program - A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also - Toshiba Tecra A2-S4372ST | User Guide - Page 247
ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer's BIOS, which is essential instructions the computer reads when you start it up. See also BIOS, memory. Compare RAM. S select - To highlight or otherwise specify text, data, or graphics - Toshiba Tecra A2-S4372ST | User Guide - Page 248
universal serial bus (USB) - A serial bus that supports a data transfer rate of up to 480 Mbps (480 utility - A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. W Web - See World Wide Web. - Toshiba Tecra A2-S4372ST | User Guide - Page 249
Index Numerics 101-key keyboard 86 A AC adapter 49 AC power cord/cable connectors 219 accessories carrying cases 104 memory 55 Add Printer Wizard 133 adding memory 55 adjusting recording quality 153 Alt keys 86 arm/wrist strain 45 assign keys Fn-esse 163 audio .wav files 152 audio features 149 Auto - Toshiba Tecra A2-S4372ST | User Guide - Page 250
compact disc positioning 99 compact discs handling 99 inserting 98 problem solving 203 removing 100 computer customizing 166 non-system disk 78 disable/enable TOSHIBA Touch and Launch 183 Disk Defragmenter 201 disk drive corrupted/damaged data files 201 missing files/trouble accessing a disk 200 - Toshiba Tecra A2-S4372ST | User Guide - Page 251
multi-function drive drive tray will not open 202 problems 202 troubleshooting 194 E energy saving features 114 ergonomics 44 error messages device driver conflict 191 general hardware problem 191 non-system disk or disk error 188, 202 problem with display settings/ current settings not working with - Toshiba Tecra A2-S4372ST | User Guide - Page 252
to 147 features 148 slow connection 190 surfing 148 uploading and downloading files 149 URL address not found 190 Internet Explorer icon 140 Internet Service Providers 147 IRQ (Interrupt Request) 192 ISPs 147 J jack RJ-11 159 K keeping comfortable 42 key assign 163 changing 164 direct assign 163 - Toshiba Tecra A2-S4372ST | User Guide - Page 253
57 memory module inserting 58 installation 56 removing 61 microphone 152 external, connecting 82 Microsoft Support Online Web site 191 modem connecting to a telephone line 158 determining COM port 142 problem solving 207, 208 resetting port to default settings 142 upgrading 142 modules Wi-Fi Mini - Toshiba Tecra A2-S4372ST | User Guide - Page 254
driver 133 local, connecting 79 problem solving 206, 207 set up 133 using 132 printing a file 95 problem computer will not power up 187 contacting Toshiba 209, 210 corrupted/damaged data files 201 keyboard produces unexpected characters 197 missing files/trouble accessing a disk 200 modem not - Toshiba Tecra A2-S4372ST | User Guide - Page 255
201 screen does not look right/ flickers 198 system resources 192 trouble prevention 208 URL address not found 190 using Startup options 189 warning setting up your computer 47 settings TOSHIBA Touch and Launch 182 shutting down more quickly 107 sound problem solving 203 sound recording 153 sounds - Toshiba Tecra A2-S4372ST | User Guide - Page 256
Online 191 Web sites,Toshiba 211 Wi-Fi wireless networking 143 Wi-Fi Mini PCI modules 136 Windows Explorer 90 Windows Media Player 149 Windows Millennium Edition Help 191 Windows Start menu 90 Windows XP Help 190 Help and Support 190 problem solving 188 Windows XP Professional desktop 138 Windows
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
 |
 |
PMAD00010013
09/04
Tecra
®
A2 Series
User’s Guide
If you need assistance:
❖
Toshiba Global Support Centre
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273
For more information, see
“If Something Goes Wrong” on
page 185
in this guide.