Tripp Lite 9PX1000GRT Product Datasheet

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton 9PX 1000VA 900W 208V Online Double-

Conversion UPS - C14 Input, 8 C13 Outlets,

Cybersecure Network Card Option, Extended

Run, 2U Rack/Tower

MODEL NUMBER:

9PX1000GRT

Provides sine wave output, complete battery backup and power protection for mission-critical IT

installations, edge networks and other advanced network applications.

Features

1kVA/900W/208V Battery Backup for IT Installations and Edge Networks

This 9PX rack-mount online double-conversion UPS system provides reliable battery backup and AC

power protection against blackouts, brownouts, surges and line noise that can damage valuable IT

equipment or destroy data. The 9PX1000GRT is superlative power management for education,

commercial, financial or healthcare networking components, including Cisco switches and servers.

Expandable Internal Battery Backup Keeps You Operational Through Power Outages

The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work

through short power failures and give you enough time to safely save files and shut down your system in

case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely

monitors battery health to provide advanced notice when batteries need replacing. You can also connect

up to four extended battery modules (9PXEBM48RT, sold separately) for hours of extended runtime.

Optional Gigabit Network Interface Offers 24/7 Remote Access

The NETWORK-M2 Gigabit network card (sold separately or as a network card bundle) enables full

remote configuration and management, including load shedding, reboots of connected equipment and

safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping

the load, so you don’t have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2

standards for cybersecurity, which were developed to address the vulnerability of connected devices to

known malware/exploits and to protect business from these risks. The optional Environmental Monitoring

Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities,

including temperature and humidity conditions.

C13 Outlets Protect Your Connected Components

Eight managed C13 outlets provide connected equipment with pure sine wave AC output and allow you to

monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to

protect connected equipment against damaging surges and line noise. Four outlets are grouped into two

load banks that let you shed non-critical loads to extend runtime for critical loads.

Highlights

Keeps equipment running during

outages to allow time for file

saves and safe shutdown

●

Optional NETWORK-M2 Gigabit

network card enables full remote

access and control

●

C13 outlets split into separate

switched banks for managed

load shedding

●

Interactive LCD interface keeps

you updated on critical load

information in real time

●

Optional extended battery

modules allow extended runtime

to keep equipment powered

●

Package Includes

1000VA 900W 208V 9PX Online

Double-Conversion UPS with 8

Outlets

●

USB cable

●

RS-232 cable

●

Rack-mounting hardware

●

Tower support stands

●

Safety guide

●

Quick Start Guide

●

1 / 4