Tripp Lite SU2200RTXL2UN Older Revision Owner's Manual for SNMPWEBCARD 932915
Tripp Lite SU2200RTXL2UN Manual
View all Tripp Lite SU2200RTXL2UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Tripp Lite SU2200RTXL2UN manual content summary:
- Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 1
. If you have misplaced your printed manual, refer to the electronic version included on the bundled CD-ROM or download it at www.tripplite.com/support/manuals/. 1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support Copyright © 2009 Tripp Lite. All trademarks are the sole property - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 2
to events such as power failures. * SNMPWEBCARD is preinstalled in Tripp Lite switched PDUs, which can be identified by the presence of "NET" in the model name. 1.1 System Requirements • Tripp Lite UPS system or PDU with compatible accessory slot • Ethernet network that supports the TCP/IP protocol - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 3
3.9 Settings > Network Temperature High & Battery Low Event Shut Down UPS System 2 Minutes supports frames, forms and Java. 2. Type the IP address assigned to the SNMPWEBCARD or PDU into the address field and press the enter key. (Refer to the printed manual for IP address assignment instructions - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 4
3.2 Web Console Interface B Clicking the Tripp Lite logo A in the header opens Tripp Lite's Web site in a new browser window. The severity of the condition, the cause of the condition (such as "UPS on Battery") and the automatic response or recommended user response (such as "Prepare system for - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 5
3.3 Status (Continued) RSS Feed The RSS Feed feature was implemented to allow users to subscribe to the SNMPWEBCARD to view current alarm status, as well as event logs in the form of .XML, .TXT and .CSV files. This allows a user to quickly view status on the SNMPWEBCARD without requiring a login to - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 6
power is available and switches to battery power if AC utility power is interrupted. When the Input AC power is out of range limits, the UPS resumes full operation. To put a Tripp Lite in Economy Mode. Note: The UPS must be manually power-cycled to accept the new setting. Figure 3-7: Actions > Control - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 7
maximum capacity in order to accommodate higher startup power demands and other increased power needs.) If your device has controllable load Cycle (see Figure 3-9a). This feature is only available on models that support Ramping and Shedding. See section 5 for information on Ramping and Shedding. - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 8
Warning" field is tied to the "Battery Capacity Below Warning" event. See Section 5 - Load Ramping and Shedding for information about the "Ramping" and "Shedding" tabs. The tabs will only be accessible if the device supports these features. 3.7 Settings > Events Click the "Settings" menu button - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 9
3.8 Settings > Contacts Click the "Settings" menu button and the "Contacts" submenu button to display the Settings > Contact Settings page. The "Email" tab (Figure 3-13) shows a table of e-mail contacts. Before your SNMPWEBCARD can send e-mail notifications, you must enter e-mail server information - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 10
DHCP address (assigned automatically by a DHCP server on your network). DHCP is the default setting. (For instructions on assigning a static IP address via terminal mode, refer to the printed manual that came with your SNMPWEBCARD or PDU.) • "IP Address," "Network Mask" and "Default Gateway" are IP - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 11
3.9 Settings > Network (continued) The "Web" tab (Figure 3-17) allows you to enable or disable Web browser access, choose the HTTP and/or HTTPS protocol and set the HTTP port. HTTP (default setting) is the standard protocol used by Web browsers. HTTPS is a secure protocol that encrypts and decrypts - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 12
backup battery that keeps the clock running when the card is powered off. The "Date/Time" tab (Figure 3-20) allows you to set the date and time manually the SNMPWEBCARD and change its settings. Tripp Lite recommends defining passwords for both user as a backup in the event of system problems or to - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 13
Figure 3-23: Logs > Data Page 3.13 Help Click the "Help" menu button to open a PDF that contains the most recent version of the SNMPWEBCARD User's Guide. 13 - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 14
4. Telnet/SSH Console Most of the monitoring and control features available in the Web console (see Section 3 - Web Console) are also available in the telnet and/or SSH console. Accessing the SNMPWEBCARD through the telnet console is ideal for mobile or resource-limited platforms. Accessing the - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 15
AC input power is lost, increasing the battery backup runtime available for supported equipment. You can disable load shedding by setting all actions to "Remain On." You can disable load ramping by setting all actions to "Remain Off." Load ramping and load shedding require a Tripp Lite UPS system - Tripp Lite SU2200RTXL2UN | Older Revision Owner's Manual for SNMPWEBCARD 932915 - Page 16
Technical Support Before contacting Tripp Lite Technical Support, refer to Section 6 - Troubleshooting for possible solutions. If you are still unable to resolve the problem, you can reach Tripp Lite Technical Support here: www.tripplite.com/support E-mail: [email protected] Tripp Lite has
User’s Guide
SNMPWEBCARD
Firmware Version 12.04.0048
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2009 Tripp Lite. All trademarks are the sole property of their respective owners.
1.
Introduction
2
1.1
System Requirements
2
2.
Installation and Configuration
2
2.1
Default UPS System Shutdown Setting
2
2.2
Other Default Settings
3
2.3
SNMP Configuration
3
3.
Web Console
3
3.1
Opening the Web Console
3
3.2
Web Console Interface
4
3.3
Status
4
3.4
Actions > Control
6
3.5
Actions > Loads
7
3.6
Settings > Device
8
3.7
Settings > Events
8
3.8
Settings > Contacts
9
3.9
Settings > Network
10
3.10
Settings > System
12
3.11
Logs > Events
13
3.12
Logs > Data
13
3.13
Help
13
4.
Telnet/SSH Console
14
5.
Load Ramping and Shedding
15
6.
Troubleshooting
16
7.
Technical Support
16
Documentation Notice:
This User’s Guide is a supplement to the printed manual that came with your SNMPWEBCARD or network-enabled PDU. Refer to the printed manual
for instructions on hardware installation and basic configuration, including IP address assignment. If you have misplaced your printed manual, refer to the electronic version
included on the bundled CD-ROM or download it at www.tripplite.com/support/manuals/.