Tripp Lite SU3000RTXLCD2UN Instruction Sheet for Tripp Lite Networked Device M
Tripp Lite SU3000RTXLCD2UN Manual
 |
View all Tripp Lite SU3000RTXLCD2UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Tripp Lite SU3000RTXLCD2UN manual content summary:
- Tripp Lite SU3000RTXLCD2UN | Instruction Sheet for Tripp Lite Networked Device M - Page 1
Instruction Sheet PowerAlert® Mass Configuration Utility Introduction The PowerAlert Mass running 12.04.0055 cannot be configured using this tool. Mass configuration across platforms is not supported. For example, an LX Platform device configuration cannot be applied to SNMPWEBCARD-based devices, and - Tripp Lite SU3000RTXLCD2UN | Instruction Sheet for Tripp Lite Networked Device M - Page 2
PC running Microsoft Windows (7, 8, 10, Server 2008, 2012, 2016) TCP/IP network connection-make sure that TCP Port 3664 is open in your firewall. Usage Instructions Prior to using this utility, it is suggested that all required configuration changes be made to the device that will be chosen as the - Tripp Lite SU3000RTXLCD2UN | Instruction Sheet for Tripp Lite Networked Device M - Page 3
Usage Instructions STEP 3. Choose the target devices by clicking the Add Devices button located at the bottom right. In the window that appears, a single device can be - Tripp Lite SU3000RTXLCD2UN | Instruction Sheet for Tripp Lite Networked Device M - Page 4
Usage Instructions STEP 4. Once all target devices have been selected, click the Configure button. In the Configure Targets window that appears, click Start. The window will display a - Tripp Lite SU3000RTXLCD2UN | Instruction Sheet for Tripp Lite Networked Device M - Page 5
source ATS to target ATS (systems). Note: An ATS is a PDU that supports the "Auto Transfer Switch" feature, identified by its ability to switch between onto target devices. 11. Where can I find information to help me troubleshoot issues related to the use of this utility? When executed, the utility
-
1 -
2 -
3 -
4 -
5
 |
 |
Instruction Sheet
PowerAlert
®
Mass Configuration Utility
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
Introduction
The PowerAlert Mass Configuration Utility enables the configuration of one networked Tripp Lite device to be copied and transferred
onto multiple other such devices. It can be used with LX Platform devices that run version 15.0.0 (or later) firmware, as well as
SNMPWEBCARD-based devices that run version 12.06.0060 (or later) firmware.
Notes:
SNMPWEBCARD-based devices running 12.04.0055 cannot be configured using this tool.
Mass configuration across platforms is not supported. For example, an LX Platform device configuration cannot be applied to SNMPWEBCARD-based devices, and
vice-versa.
WARNING: Make sure to use Mass Configuration Utility v1.1.0 or higher when configuring LX Platform devices.
Using an earlier version (1.0.0.x) will cause your LX Platform device to become inaccessible.
To confirm version, right-click on the executable file icon and select Properties.
The version is listed in the Details tab.