Tripp Lite SU6000RT4UTFTAA Owners Manual for SmartOnline Single-Phase 5kVA-6kV
Tripp Lite SU6000RT4UTFTAA Manual
View all Tripp Lite SU6000RT4UTFTAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Tripp Lite SU6000RT4UTFTAA manual content summary:
- Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 1
Owner's Manual SmartOnline™ Single- 12 Manual Bypass Operation 14 Operation 15 Internal Battery Replacement 28 Storage and Service 29 çais 59 88 PROTECT YOUR INVESTMENT! Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 2
INSTRUCTIONS. This manual contains important instructions Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement service work performed on hardwired power modules, they should be turned off or manually bypassed via the transformer. Prior to any service - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 3
applications. 4-Post Mounting 1 The included plastic pegs A will temporarily support the empty rackmount shelves B while you install the permanent mounting hardware installed. See the Installation Kit's owner's manual for complete mounting instructions. Note: 2-post mounting is not recommended for 12kVA - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 4
Features Before installing and operating your UPS, familiarize yourself with the location and function of the features of each component. Power Module Front Panel Controls 1 LCD DISPLAY: This backlit (16 × 2 character) dot matrix display indicates a wide range of UPS operating conditions and - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 5
Features (Rear Panel) See "Features" section for feature descriptions SU5000RT4UHV-5kVA UPS System 9 10 11 12 13 1 8 7 4 6 SU6000RT4UHV-6kVA UPS System with NEMA PDU 9 10 11 12 RS-232 PARALLEL EPO RS-232 USB 13 ACC. SLOT 1 3 26 8 7 6 5 26 3 4 SU6000RT4UHVHW-6kVA UPS System - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 6
NORMAL BY PASS 2 4 21 7 7 21 5 26 15 SU12KRT4UHW-12kVA UPS System and Parallel PDU Modules Note: See the manual included with the Parallel PDU for 12kVA installation, configuration and setup instructions. 9 10 11 12 RS-232 PARALLEL EPO 20 19 18 13 17 16 15 RS-232 USB 1 2 11 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 7
Features (Rear Panel) (continued) See "Features" sectiion for feature descriptions SU6000RT4UTFHW-6kVA UPS with Hardwire PDU and 6kVA Isolation Step Down Transformer (SU6000XFMR2U) 24 24 8 14 25 12 11 9 RS-232 PARALLEL EPO ACC. SLOT 13 10 RS-232 USB 1 NORMAL BY PASS 2 26 16 15 4 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 8
Owner's Manual for connection instructions and safety warnings. 5 Maintenance Bypass Switch: This switch allows qualified service personnel to the 6kVA model). Refer to the manual provided with the Parallel PDU Kit. For more information, visit www.tripplite.com/support. 12 EPO (Emergency Power - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 9
batteries while providing power to the output. 1 If you have a PDU with manual bypass, set the PDU bypass switch to "NORMAL." 2 Turn UPS ON. Press 3 Plug your equipment into your UPS. Your UPS is designed to support electronic equipment only. You will overload your UPS if the total VA rating - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 10
Connection (continued) Terminal Strip Connection-IEC PDU Module (SU6000RT4UHVG) Model SUPDMB6KIEC Input Voltage 200~240V (L-N) Maximum Rated Input Current 30A Typical Wire Size 8 mm2 1 Unscrew 3 screws to remove the terminal strip cover and slide out as seen in diagram 1. 1 2 Connect the L1, - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 11
combined load does not exceed capacity. L1 G L2 208 / 240V Input L G N 120V Output Branch A N G L 120V Output Branch B SU12KRT4UHW See manual included with Parallel PDU for connection, setup and installation information. Set Front Panel Selector Switch to Proper Voltage Before Making - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 12
for a minimum of 1 second. This does not apply to a latching EPO switch. 3. For setup of a normally closed-switch EPO connection, please contact Tripp Lite Technical Support. CAUTION: The EPO port is not a phone line surge suppressor; do not connect a phone line to this port. 12 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 13
battery pack cable. Complete installation instructions for your battery pack appear in the battery pack Owner's Manual. Make sure that cables are Lite's RELAYIOCARD is also available.) Visit www.tripplite.com/ 4 support for more information, including a list of available SNMP, network management - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 14
not receive battery power in the event of a blackout. * See manual included with SU12KRT4UHW Parallel PDU for Bypass. UPS Removal (6kVA Single UPS serviced. With an assistant holding the front of the UPS in place, carefully detach the PDU from the rear of the UPS and rest it on the UPS support - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 15
Operation LED Display Information ONLINE Mode: AC input voltage in normal range: 156-280V. IP BYPASS Bypass Mode: AC input voltage in a range of: -20 to +15% of the rating voltage; Bypass Mode is enabled. Flashing IP BYPASS Economy Mode: AC input voltage in a range between -10 and +10% of - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 16
% Failed Self-Test If a problem is detected during the self-test, the LCD will display an error message. If your UPS displays any of the following messages in its LCD, visit www.tripplite.com/support for service. BAD BATTERY! CALL FOR SERVICE CHARGE BATT FAIL! CALL FOR SERVICE AC/DC FAILURE! CALL - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 17
AC power is interrupted. Parallel Mode (SU12KRT4UHW model only): The UPS can provide redundancy up to 6kVA or power up to 12kVA. Refer to the manual provided with the Parallel PDU Kit for more information. The second line of the LCD Display shows basic power conditions. In each operating mode you - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 18
Operation (continued) Normal Operation Display Information Parallel Mode (12kVA model only): PARALLEL MODE 00.00KW / 000% PARALLEL: MASTER 00.00KVA / 000% INPUT VOLTAGE 000V / 00.0Hz BYPASS VOLTAGE 000V / 00.0Hz OUTPUT VOLTAGE 000V / 00.0Hz BATTERY CAPACITY 000V / 000% REMAINING - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 19
Operation (continued) Changing the Password To change the password, scroll DOWNi from the SETUP MENU screen to the BASIS SETTING screen. From here, press ON for the CHANGE PASSWORD screen. From this screen press ON and follow the previously described actions to set your password. When set, press ON - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 20
To ENTER CURRENT = 1.5A ENT DOWN UP CURRENT = 3.0A ENT DOWN UP CURRENT = 4.0A* ENT DOWN UP Use the following table as a guide for charger settings based on the number of battery packs you are using. UPS Charge Current Setting for 5/6kVA Models Internal Battery Pack + External - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 21
Operation (continued) Battery Settings Discharge Test: Used to set the time period for discharge tests. From the SETUP MENU screen, scroll DOWNi until you reach the BATTERY SETTING screen. Press ON for the DISCHARGE TEST screen. Here, press ON. Now you can scroll DOWNi or UPh between NO TEST, 30, - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 22
Operation (continued) Output Settings Note: Any Output Setting changes require a UPS power cycle. Output Voltage: Used to set the UPS's output voltage rating. From the SETUP MENU screen, scroll DOWNi until you reach the OUTPUT SETTING screen. Press ON to reach an OUTPUT VOLTAGE screen and ON again. - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 23
Operation (continued) Output Settings ECO Mode: Used to set the UPS's ability to work in the energy saving Economy Mode. When input voltage is in a + or - range of 10% of the overall voltage rating, the UPS will transfer into an Economy Mode to improve the efficiency of the UPS. From the SETUP MENU - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 24
Operation (continued) UPS Alarm Log UPS ALARM LOG ENT DOWN UP READ FROM MEMORY ENT DOWN UP 1 65535 HH:MM:SS NO HISTORY To ENTER 2 65535 HH:MM:SS NO HISTORY 3 65535 HH:MM:SS NO HISTORY 4 65535 HH:MM:SS NO HISTORY 5 65535 HH:MM:SS NO HISTORY Read From - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 25
Operation (continued) Self Diagnosis Information When starting with AC power, you will see the following sequence display: DIAGNOSTIC MODE FREQ OUT = 50Hz DIAGNOSTIC MODE INPUT 000V / 00Hz DIAGNOSTIC MODE RECTIFIER OK DIAGNOSTIC MODE CHARGER OK DIAGNOSTIC MODE BATTERY OK DIAGNOSTIC MODE DC - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 26
On Battery Alarm When in the On Battery Mode, the UPS power module will beep to inform you that it is using battery power to support connected equipment. If its connected batteries are at more than half capacity, it will beep every two seconds. If its connected batteries are below half - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 27
Operation (continued) Shutdown Messages Your UPS will shut down and the LCD will display a message if it detects one of the following conditions. Note: During all these conditions, the "Input," "Output" and "Bypass" LEDs will be illuminated. SHUTDOWN CONDITIONS LCD DISPLAY MESSAGES Extended - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 28
years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e. leaving the UPS ON), but some qualified service personnel may wish to completely turn the UPS OFF and disconnect equipment before proceeding. It is suggested that you remove the batteries - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 29
this manual to insure that the service problem does not originate from a misreading of the instructions. 2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support. 3. If the problem requires service, visit www.tripplite.com/support and - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 30
Conexión 38 Conexión opcional 41 Operación de derivación manual 43 Funcionamiento 44 Reemplazo de la batería interna 57 88 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2019 Tripp Lite.Todos los derechos reservados. SmartOnline es una marca - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 31
de seguridad importantes GUARDE ESTAS INSTRUCCIONES Este manual contiene instrucciones y advertencias importantes que deben reemplazo (R.B.C.) para sistemas UPS. Visite Tripp Lite en la Web en www.tripplite.com/support/battery/ index.cfm para buscar la batería de reemplazo específica para su UPS. - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 32
o los procedimientos no son adecuados para la aplicación, comuníquese con el fabricante del rack o del rack de bastidor. Las instrucciones de este manual son para racks comunes y racks de bastidor y pueden no ser adecuadas para todas las aplicaciones. 4-Tras el montaje 1 Los pasadores plásticos - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 33
Características Antes de instalar y hacer funcionar el UPS, debe familiarizarse con la ubicación y función de las características de cada componente. Controles del panel frontal del módulo de potencia 11 10 9 876 1 PANTALLA LCD: La pantalla de matriz de puntos (16 × 2 caracteres) con luz de - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 34
Características (Panel trasero) Consulte la sección "Características (Panel trasero)" para observar las descripciones de la característica SU5000RT4UHV-Sistema UPS 5kVA 9 10 11 12 13 1 8 7 4 6 SU6000RT4UHV-Sistema UPS 6kVA con PDU NEMA 9 10 11 12 RS-232 PARALLEL EPO 13 ACC. SLOT RS- - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 35
SU12KRT4UHW-Sistema de UPS de 12kVA y Módulos PDU paralelos Nota: Para las instrucciones de instalación, configuración y puesta a punto del sistema de 12kVA, consulte el manual incluido con el PDU Paralelo. 9 10 11 12 20 19 18 13 17 16 15 RS-232 PARALLEL EPO RS-232 USB 1 2 11 4 RS - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 36
Características (Panel trasero) SU6000RT4UTFHW-UPS de 6kVA con PDU Con Instalación Eléctrica Permanentemente y Transformador Reductor de Aislamiento de 6kVA (SU6000XFMR2U) 24 24 8 14 25 12 11 9 RS-232 PARALLEL EPO ACC. SLOT 13 10 RS-232 USB 1 NORMAL BY PASS 2 26 16 15 4 5 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 37
paralelo: Para la comunicación en paralelo del UPS (funciona sólo en el modelo 6kVA). Consulte el manual proporcionado con el juego de PDU Paralelo. Para obtener más información, visite www.tripplite.com/support. 12 Puerto EPO (Apagado de emergencia): El módulo de potencia cuenta con un puerto EPO - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 38
UPS mostrará "BYPASS MODE" (modo de rodeo) y cargará automáticamente sus baterías mientras proporciona energía en la salida. Si tiene un PDU con rodeo manual, coloque el interruptor de rodeo del PDU en "NORMAL". 1 2 Encienda el UPS Pulse el botón "ON" del UPS hasta oír un pitido para comenzar la - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 39
Conexión (continuación) Conexión de la banda de terminales-Módulo de PDU IEC (SU6000RT4UHVG) Modelo SUPDMB6KIEC Voltaje de entrada 200~240V (L-N) Corriente de entrada máxima calificada 30A Tamaño de cable típico 8 mm2 1 Desatornille los tres tornillos para extraer la cubierta de la banda de - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 40
la capacidad. L1 G L2 208 / 240V Input L G N 120V Output Branch A N G L 120V Output Branch B SU12KRT4UHW Para la conexión, puesta a punto e instalación, consulte el manual incluido con el PDU Paralelo. Set Front Panel Selector Switch to Proper Voltage Before Making Connections 40 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 41
Conexión opcional Las siguientes conexiones son opcionales. El sistema UPS funcionará correctamente sin estas conexiones. 1 Conexiones de comunicación serial y USB RS-232 Utilice el cable incluido para conectar el puerto "RS-232" del módulo de potencia al puerto de comunicación del ordenador. Esto - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 42
de instalación completas para el módulo de baterías se incluyen en el manual del propietario del módulo de baterías. Asegúrese de que los cables la tarjeta RELAYIOCARD de Tripp Lite). Visite www.tripplite. com/support para obtener más información, incluyendo una lista de productos de SNMP - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 43
público sin filtrar. Pero los equipos no recibirán energía de la batería en el caso de un apagón. * Para el rodeo, consulte el manual incluido con el PDU Paralelo SU12KRT4UHW. Extracción del UPS (Configuraciones Únicamente para Módulo de Potencia de un Solo UPS de 6kVA) PASO 1. Inhabilite PowerAlert - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 44
Funcionamiento Información de la pantlla LED Modo ONLINE [en línea]: Voltaje de entrada CA en rango normal: 156-280V. Modo de derivación: Voltaje de entrada CA en un rango de: -20 a +15% del voltaje nominal; modo de derivación habilitado. Modo económico: Voltaje de entrada CA en un rango entre - - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 45
el autotest, el LCD mostrará un mensaje de error. Si el UPS muestra algunos de estos mensajes en el LCD, visite www.tripplite.com/support para obtener mantenimiento. FALLA EN LA BATERÍA LLAME A MANTENIMIENTO FALLÓ LA CARGA DE LA BATERÍA LLAME A MANTENIMIENTO FALLA DE CA/CC LLAME A MANTENIMIENTO - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 46
lo en el modelo SU12KRT4UHW): El UPS puede proporcionar redundancia de hasta 6kVA o alimentación de hasta 12kVA. Para información adicional, consulte el manual proporcionado con el juego del PDU Paralelo. La segunda línea de la pantalla LCD muestra las condiciones de alimentación básicas. En todos - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 47
Funcionamiento (continuación) Funcionamiento normal Información de la pantalla Modo paralelo (sólo modelo 12kVA): MODO PARALELO 00.00KW / 000% PARALELO: MAESTRO 00.00KVA / 000% VOLTAJE DE ENTRADA 000V / 00.0Hz VOLTAJE DE DERIVACIÓN 000V / 00.0Hz VOLTAJE DE SALIDA 000V / 00.0Hz - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 48
Funcionamiento (continuación) Cambio de la contraseña Para cambiar la contraseña, desplácese HACIA ABAJO en la pantalla del MENÚ CONFIGURACIÓN en la pantalla de CONFIGURACIÓN BÁSICA. Aquí, pulse ON para ingresar a la pantalla CAMBIO DE CONTRASEÑA. En esta pantalla pulse ON y siga los pasos - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 49
Funcionamiento (continuación) Configuración inicial El UPS puede iniciarse a través de la batería sin alimentación CA. El VALOR PREDETERMINADO es HABILITADO. Cuando el UPS cambia a batería puede REINICIARSE AUTOMÁTICAMENTE para funcionar en Modo en línea cuando se restablece la alimentación CA. El - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 50
Funcionamiento (continuación) Configuración de la batería Prueba de descarga: Se utiliza para establecer el período para las pruebas de descarga. Desde la pantalla MENÚ DE CONFIGURACIÓN, desplácese HACIA ABAJO hasta llegar a la pantalla CONFIGURACIÓN DE LA BATERÍA. Pulse ON para acceder a la - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 51
Funcionamiento (continuación) Configuración de salida Nota: Cualquier cambio en la configuración de la salida requiere un ciclo de alimentación del UPS. Voltaje de salida: Utilizado para establecer la calificación de voltaje de salida del UPS. Desde la pantalla MENÚ DE CONFIGURACIÓN, desplácese - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 52
Funcionamiento (continuación) Configuración de salida Modo ECO: Se utiliza para establecer la capacidad del UPS para funcionar en el Modo económico de ahorro de energía. Cuando el voltaje de entrada se encuentra en un rango + o - de 10% de la calificación de voltaje total, el UPS se transferirá al - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 53
Funcionamiento (continuación) Registro de alarma del UPS REGISTRO DE ALARMA DEL UPS ING. ABAJO ARRIBA LECTURA DE LA MEMORIA ING. ABAJO ARRIBA Para INGRESAR 1 65535 HH:MM:SS SIN HISTORIAL 2 65535 HH:MM:SS SIN HISTORIAL 3 65535 HH:MM:SS SIN HISTORIAL 4 65535 HH:MM:SS SIN - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 54
Funcionamiento (continuación) Información de auto diagnóstico Cuando inicie con alimentación CA, observará la siguiente secuencia de pantallas: MODO DIAGNÓSTICO FREC. SALIDA = 50Hz MODO DIAGNÓSTICO ENTRADA 000V / 00Hz MODO DIAGNÓSTICO RECTIFICADOR OK MODO DIAGNÓSTICO CARGADOR OK MODO DIAGNÓ - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 55
Funcionamiento (continuación) Mensajes de apagado por falla del UPS CONDICIÓN +BUS >450V Carga 100%: +BUS 450V Carga - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 56
Funcionamiento (continuación) Mensajes de apagado El UPS se apagará y el LCD mostrará un mensaje si detecta una de las siguientes condiciones. Nota: Durante todas estas condiciones, se iluminarán los LED de "Entrada", "Salida" y "Derivación". CONDICIONES DE APAGADO MENSAJES DE LA PANTALLA LCD - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 57
Reemplazo de las baterías internas Bajo condiciones normales, las baterías originales del UPS duran muchos años. Consulte la sección Seguridad antes de reemplazar las baterías. Las baterías están diseñadas para el reemplazo en funcionamiento (es decir, dejando el UPS encendido), pero quizá, algún - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 58
el sitio. Para obtener más información sobre mantenimiento, visite www.tripplite.com/support. Antes de enviar el producto a mantenimiento, siga estos pasos: 1. Revise los procedimientos de instalación y operación descritos en este manual para asegurarse de que el problema de servicio no se origina - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 59
des batteries internes 86 Stockage et entretien 87 Garantie 87 English 1 Español 30 88 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2019 Tripp Lite. Tous droits réservés. SmartOnline est une marque déposée de Tripp Lite. 59 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 60
CES INSTRUCTIONS. UPS pour maintenir une bonne ventilation. • Ne pas installer l'UPS près d'un support de stockage magnétique, car cela pourrait en corrompre les données. • doivent être ni raccordé(s) ni retiré(s) tant que l'UPS est en service à partir de la batterie ou si le PDU amovible n'est pas - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 61
vérifier que les 1 étagères sont au même niveau. Remarque : le rebord de support de chaque étagère doit être dirigé vers l'intérieur. 2 Fixez solidement les é de l'équipement. Consulter la section Remplacement des batteries pour des instructions sur le retrait des batteries. 3 D F 4 À l' - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 62
Caractéristiques Avant d'installer et de mettre votre UPS en service, familiarisez-vous avec l'emplacement et la fonction des caractéristiques de chaque composant. Commandes du Panneau avant du module d'alimentation 1 AFFICHAGE À CRISTAUX LIQUIDES (LCD) : cet - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 63
Caractéristiques (Panneau arrière) Voir la section « caractéristiques » pour la description des caractéristiques SU5000RT4UHV-Système UPS 5kVA 9 10 11 12 13 1 8 7 4 6 SU6000RT4UHV-Système UPS 6kVA avec PDU NEMA 9 10 11 12 RS-232 PARALLEL EPO 13 ACC. SLOT RS-232 USB 1 3 26 8 7 6 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 64
15 SU12KRT4UHW-Système d'ASC de 12 kVA et modules PDU parallèles Remarque : Voir le manuel inclus avec le PDU parallèle pour des instructions concernant l'installation, la configuration et le réglage 12 kVA. 9 10 11 12 RS-232 PARALLEL EPO 20 19 18 13 17 16 15 RS-232 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 65
Caractéristiques (Panneau arrière) Voir la section « caractéristiques » pour la description des caractéristiques SU6000RT4UTFHW-ASC 6 kVA avec PDU à raccordement fixe et le transformateur abaisseur d'isolation 6 kVA (SU6000XFMR2U) 24 8 14 12 11 9 RS-232 PARALLEL EPO ACC. SLOT 24 25 13 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 66
pas recevoir l'alimentation de la batterie en cas de panne. 3 Cordon d'entrée CA : se branche directement à la prise murale pour un courant de service de 200-240V CA. 4 Connecteur de batterie externe : utilisez ce connecteur pour raccorder un ou plusieurs modules de batterie Tripp Lite au module - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 67
é ne sera accessible qu'après avoir été rechargée durant 24 heures. 2 3 Raccorder votre équipement à votre UPS Votre UPS est conçu pour supporter les équipements électroniques uniquement. Vous surchargerez votre UPS si la tension VA totale pour l'ensemble des équipements que vous branchez - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 68
Raccordement (suite) Branchement des barrettes de raccordement - Module PDU IEC (SU6000RT4UHVG) Modèle SUPDMB6KIEC Courant d'entrée Tension d'entrée nominal maximum 200~240V (L-N) 30A Taille des câbles standard 8 mm2 1 Dévisser les trois vis pour retirer la plaque couvrant des barrettes de - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 69
Raccordement (suite) 2 Brancher les 2 jeux de L1, L2 et les câbles de mise à la terre (1 entrée, 1 prise de sortie) en fonction des indications sur les bornes, comme dans le dessin 2. Assurez-vous de brancher un jeu de câbles sur les bornes d'entrée et l'autre jeu sur les bornes de sortie. 2 3 Faire - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 70
avec maintien. 3. Pour la configuration de la connexion d'un commutateur de mise hors tension d'urgence (EPO) normalement fermé, veuillez contacter le service de l'assistance technique de Tripp Lite. MISE EN GARDE : Le port EPO n'est pas un parasurtenseur de ligne téléphonique; ne pas brancher - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 71
du bloc de batteries. Suivez les instructions d'installation jusqu'à la fin pour connaître les instructions relatives au bloc de batteries. Assurez Tripp Lite est également disponible). Rendez-vous sur www.tripplite.com/support pour obtenir plus d'informations, notamment la liste des SNMP et des - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 72
BYPASS » (dérivation), l'équipement raccordé recevra le courant de service CA, mais ne pourra pas recevoir l'alimentation de la batterie tachez soigneusement le PDU de l'arrière de l'UPS et appuyez-le sur les rails de support de l'UPS. Enlevez le bloc de puissance de l'ASC à partir de l'avant du bâ - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 73
Utilisation Informations sur l'affichage DEL Mode EN LIGNE : tension d'entrée CA, plage normale : 156-280V. Mode dérivation : tension d'entrée CA, plage de : -20 à +15% de la tension nominale ; mode dérivation activé. IP BYPASS Clignotement IP BYPASS Mode économie d'énergie : tension d'entr - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 74
UPS affiche l'un des messages suivants sur le LCD, rendez-vous sur le site web de Tripp Lite www.tripplite.com/support. DEFAILLANCE BATTERIE ! SOLLICITEZ DES RÉPARATIONS DÉFAILLANCE CHARGE BATTERIE ! SOLLICITEZ DES RÉPARATIONS ÉCHEC CA/CC ! SOLLICITEZ DES RÉPARATIONS ÉCHEC ONDULEUR ! SOLLICITEZ DES - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 75
ment (temps de transfert nul) si le courant CA est interrompu. Mode économie : l'UPS fournit un courant CA à haut rendement tant que le courant de service est compris dans +/- 10 % de la tension nominale d'entrée CA et bascule en mode Batterie (temps de transfert nul) si le courant CA est interrompu - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 76
Utilisation (suite) Fonctionnement normal Afficher informations mode parallèle (modèle de 6kVA uniquement) : mode Parallèle 00.00KW / 000% Parallèle : maître 00.00KW / 000% Tension d'entrée 000V / 00.0Hz Tension de dérivation 000V / 00.0Hz Tension de sortie 000V / 00.0Hz Capacité - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 77
Utilisation (suite) Modifier le mot de passe Pour modifier le mot de passe, faites défiler vers le bas (bouton « DOWN ») sur l'écran « SETUP MENU » (menu de configuration) vers l'écran « BASIS SETTING » (paramètres de base). À partir de là, appuyez sur « ON » pour arriver sur l'écran « CHANGE - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 78
7A ENTRER BAS HAUT COURANT = 1,5A ENTRER BAS HAUT COURANT = 3,0A ENTRER BAS HAUT COURANT = 4,0A ENTRER BAS HAUT Utilisez le tableau suivant comme guide pour les réglages du chargeur selon le nombre de blocs de batteries que vous utilisez. Réglage courant de la charge de l'ASC pour les mod - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 79
Utilisation (suite) Paramètres de la batterie Test de décharge complète : Utilisé pour déterminer la durée des tests de décharge complète. Sur l'écran « SETUP MENU » (menu de configuration), appuyez sur « DOWN » jusqu'à ce que vous voyiez l'écran « BATTERY SETTING » (paramètres de la batterie). - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 80
Utilisation (suite) Paramètres de la puissance de sortie Remarque : pour modifier les paramètres de la puissance de sortie, vous aurez besoin du cycle électrique de l'UPS. Tension de sortie : Pour déterminer la valeur nominale de la tension de sortie de l'UPS. Sur l'écran « SETUP MENU » (menu de - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 81
Utilisation (suite) Paramètres de la puissance de sortie Mode ECONOMIE D'ENERGIE : Utilisé pour déterminer la capacité de l'UPS à travailler en mode économie d'énergie. Lorsque la tension d'entrée est comprise plus ou moins dans une tranche de 10 % de la valeur nominale globale, l'UPS basculera en - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 82
des défaillances ci-dessous : Liste des défaillances ECHEC BUS CC COURT-CIRCUIT ECHEC DE L'ONDULATEUR SURCHAUFFE ECHEC SCR DE SORTIE SURCHARGE PROBLEME AVEC LE VENTILATEUR ECHEC BATTERIE DU CHARGEUR ECHEC SCR DERIVATION ECHEC SCR D'ENTREE EN POSITION COURTE ECONOMIE D'ENERGIE PUISSANCE DE SORTIE - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 83
Utilisation (suite) Informations relatives à l'autodiagnostic Lorsque vous démarrez avec un courant CA, vous verrez apparaître la séquence suivante : MODE DIAGNOSTIC FREQUENCE SORTIE = 50Hz MODE DIAGNOSTIC PUISSANCE D'ENTREE 000V / 00Hz MODE DIAGNOSTIC REDRESSEUR OK MODE DIAGNOSTIC CHARGEUR OK - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 84
Utilisation (suite) Messages d'arrêt de l'UPS pour défaillance CONDITION +BUS >450V Charge 100%: +BUS 450V Charge - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 85
Utilisation (suite) Messages d'arrêt Votre UPS va s'éteindre et l'écran LCD affichera un message s'il détecte l'un des paramètres suivants. Remarque : dans tous les cas, les DEL « Input » (entrée), « Output » (sortie) et « Bypass » (dérivation) seront allumées. PARAMETRES D'ARRET MESSAGES DE L'É - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 86
Remplacement des batteries internes En mode de fonctionnement normal, les batteries d'origine de votre UPS dureront de nombreuses années. Consultez la section « Sécurité » avant d'effectuer le remplacement des batteries. Elles sont conçues pour un remplacement « à chaud » (c'est-à-dire que vous - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 87
lorsque vous raccordez l'UPS à un courant de service, il commencera automatiquement à charger les batteries. ses produits, si utilisés comme le requièrent les instructions applicables, sont dénués de tout défaut de maté : http://www.tripplite.com/en/support/recycling-program.cfm Tripp Lite suit une - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 88
SmartOnline 5 кВА-6 кВА 5 и 6 PDU PDU (6 кВА) English Español Français 89 90 91 96 99 97 102 115 116 116 1 29 57 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2019 Tripp Lite SmartOnline Tripp Lite. 88 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 89
mains input. Remark: Q needs to use the approved component of Safety Certification. Tripp Lite www. tripplite.com/UPSbatteryrecycling Tripp Lite Tripp Lite www.tripplite.com/ support/battery/index.cfm. 89 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 90
4 точки 4 2 1 A B 6 3 2 B C . 4U 6 4 3 D E F 4 G 12 SU12KRT4UHW 2 6 кВА) SU12KRT4UHW PDU. B A 1 B C 2 E 3 G 4 A D SW SW 14 B A C B F 14 2 5 6 2 Tripp Lite 2 2POSTRMKITWM 2 12 кВА. 90 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 91
11 10 9 876 1 2 16 2 ON/MUTE 1 3 SCROLL DOWN/EXIT SETUP SCROLL UP 4 SCROLL UP/SELECT BUTTON 2 3 4 5 SCROLL DOWN 5 OFF 6 O/P (OUTPUT 7 DC/AC 8 BYPASS 9 AC/DC 10 BATTERY ON/MUTE 11 I/P (INPUT 91 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 92
SU5000RT4UHV 5 кВА 9 10 11 12 13 1 8 7 4 6 SU6000RT4UHV 6 PDU NEMA 9 10 11 12 13 RS-232 PARALLEL EPO ACC. SLOT RS-232 USB 1 3 26 8 7 6 5 26 3 4 SU6000RT4UHVHW 6 PDU 9 10 11 12 RS-232 PARALLEL EPO 13 ACC. SLOT RS-232 USB 1 2 26 16 15 4 5 92 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 93
SU6000RT4UHVG 6 PDU IEC 9 10 11 12 13 RS-232 PARALLEL EPO RS-232 USB 1 NORMAL BY PASS 2 4 21 7 7 21 5 26 15 SU12KRT4UHW 12 PDU 12 PDU 9 10 11 12 RS-232 PARALLEL EPO 20 19 18 13 17 16 15 RS-232 USB 1 2 11 4 RS-232 PARALLEL EPO RS-232 USB 22 23 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 94
SU6000RT4UTFHW-ИБП 6 PDU 6 кВА (SU6000XFMR2U) 24 8 14 12 11 9 RS-232 PARALLEL EPO ACC. SLOT 24 25 13 10 RS-232 USB 1 NORMAL BY PASS 2 26 16 15 4 5 SU6000RT4UTF-ИБП 6 PDU NEMA 6 кВА 24 8 14 12 11 9 10 RS-232 PARALLEL EPO ACC. SLOT 24 25 13 RS-232 USB 1 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 95
8 L6-20R NEMA L6-20. 9 RS-232 DB9 RS-232 Tripp Lite 10 USB DIP RS- 232 DIP USB RELAYIOMINI). 11 6 PDU www.tripplite.com/support. 12 Порт EPO EPO 13 SNMP Tripp Lite www.tripplite.com. 14 6 PDU. 15 6 IEC/PARALLEL/HARDWIRE 12 16 6 IEC/PARALLEL/HARDWIRE 12 17 18 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 96
208 1 SU5000RT4UHV, SU5000RT4UTF, SU6000RT4UHV, SU6000RT4UTF) BYPASS MODE PDU 1 NORMAL». 2 ON 24 часов. 2 3 (200~240 1 А х 220 В = 220 ВА). 3 4 OFF Yes/No Yes No 5 ON ON BATTERY MODE - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 97
PDU IEC (SU6000RT4UHVG) SUPDMB6KIEC 200~240 В (L-N) 30A 8 мм2 1 3 1. 1 2 L1, L2 2. 2 3 1). 3 4 PDU 4 4. 4 SU6000RT4UHVHW, SU6000RT4UTHFHW) SUPDMB6KHW 200~240 В (L-N) 32A 30A 8 мм2 1 3 1. 1 97 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 98
2 L1, L2 (1 1 2 2 3 1). 3 4 PDU 4 4. 4 SU6000RT4UTF 1 XFMR к ИБП. 2 L1 G L2 208 / 240V Input L G N 120V Output Branch A N G L 120V Output Branch B SU12KRT4UHW PDU. Set Front Panel Selector Switch to Proper Voltage Before Making Connections 98 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 99
1 USB RS-232 RS-232 Tripp Lite PowerAlert USB. RELAYIOMINI DIP USB RS-232. Порт RS-232 1 SNMP/Web SNMPWEBCARD SNMP/Web USB. 2 EPO EPO EPO 2a 2b). 2a EPO EPO 4 и 5 2 и 3. 2b 1 106 10 Ом. 2 EPO 1 EPO 3 EPO Tripp Lite. EPO 99 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 100
(ВЫКЛ) OFF (ВЫКЛ) OFF (ВЫКЛ) OFF (ВЫКЛ) OFF (ВЫКЛ) OFF EPO 1 EPO 2 BYPASS MODE 3 NORMAL 3 4 SNMP/Web SNMPWEBCARD SNMP telnet RELAYIOCARD 4 SNMP www.tripplite.com/ support. 100 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 101
PDU PDU PDU BYPASS PDU SU12KRT4UHW. 6 кВА) ШАГ 1. ШАГ 2. ШАГ 3. ШАГ 4. ШАГ 5. ШАГ 6. PowerAlert SNMP или USB A OFF» B C BYPASS MODE BYPASS MODE OFF BYPASS MODE D PDU BYPASS PDU ИБП. E PDU PDU 10 PDU PDU A RS-232 PARALLEL EPO RS-232 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 102
Режим ONLINE 156-280 В. 20 до +15 10 до +10 IP BYPASS IP Мигает BYPASS IP BYPASS BATTERY AC/DC DC/AC O/P BATTERY AC/DC DC/AC O/P BATTERY AC/DC DC/AC O/P IP BYPASS IP BYPASS IP BYPASS BATTERY AC/DC DC/AC O/P BATTERY AC/DC DC/AC O/P IP - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 103
15 BATTERY 50 ГЦ 000В/00ГЦ OK OK OK OK OK 00.00КВТ/000% 50 ГЦ 000В/00ГЦ OK OK OK OK 00.00В / 000% www.tripplite.com/support 103 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 104
12 кВА). 10 8 60 50 SU12KRT4UHW 6 12 PDU. 00.00КВТ/000% 00КВА / 000% 000В / 00.0ГЦ 000В/00.0ГЦ 000В / 00.0ГЦ 000В / 000% 0000 МИНУТ 5/6КВА V00 CV01 00.00КВТ/000% - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 105
12 кВА): 00.00КВТ / 000% 00.00КВА / 000% 000В / 00.0ГЦ 000В / 00.0ГЦ 000В / 00.0ГЦ 000В / 000% 0000 МИНУТ 6КВА V00 CV01 3 h 0000 XX h i 1 (от 0 до 9 ON 0000 до 9999 1234. 105 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 106
BASIS SETTING ON CHANGE PASSWORD ON ON SAVING i SAVING:YES ON h Вниз On On НА СТР.17 On Вниз On BASIS SETTING ON CHANGE PASSWORD LANGUAGE ON ON. Вниз On Вниз ЯЗЫК On ЯЗЫКА - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 107
SETUP MENU i START SETTING ON BATTERY START ON ENABLE ON ENABLE i DISABLE ON DISABLE BATTERY START i AUTO RESTART ON ENABLE ENABLE ON i DISABLE ON DISABLE SETUP MENU i CHARGER - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 108
SETUP MENU i BATTERY SETTING ON DISCHARGE TEST ON i h NO TEST 30, 60, 90 QUICK TEST ON NO TEST. 30 60 90 108 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 109
SETUP MENU i OUTPUT SETTING ON OUTPUT VOLTAGE ON i h 200/208/220/230/240 ON 208 В *230 220 208 200 240 SETUP MENU i OUTPUT SETTING ENTER OUTPUT VOLTAGE i FREQ CONVERTER ON i h DISABLE 50 и 60 ON DISABLE 50 или - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 110
10 SETUP MENU i OUTPUT SETTING ON OUTPUT VOLTAGE (вы- i FREQ CONVERTER ECO MODE ON i h DISABLE ENABLE ON DISABLE. 5 STARTUP MENU i OUTPUT SETTING ON OUTPUT - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 111
1 65535 2 65535 3 65535 4 65535 5 65535 5 EEPROM DC BUS FAIL CHARGER BATTERY FAIL SHORT CIRCUIT BYPASS SCR SHORT FAIL INVERTER FAIL INPUT SCR SHORT FAIL OVER TEMPERATURE ENERGY SAVING OUTPUT SCR FAIL - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 112
50 ГЦ 000В / 00Гц OK OK OK OK OK 00.00КВТ / 000% 50 ГЦ 000В / 00Гц OK OK OK OK 00.00В / 000% 112 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 113
BUS >450 100%: +BUS < 320 100%: +BUS 450 100%: -BUS < 320 100%: -BUS - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 114
Input», «Output» и «Bypass XXX% 114 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 115
1 A 2 B 3 A 1 13 4 C D , 5 E F . 6 G . 7 F и G . 8 E . B 9 D 2 12 10 C D 11 12 B . 13 A C 4 D 9-10 5 G F E 7-8 6 115 G 7 - Tripp Lite SU6000RT4UTFTAA | Owners Manual for SmartOnline Single-Phase 5kVA-6kV - Page 116
Product Returns RMA RMA Tripp Lite Tripp Lite 2 2 1 Tripp Lite, 1111 35 60609 www.tripplite.com/support Tripp Lite; 1111 W.35th Street; Chicago IL 60609; USA Tripp Lite WEEE Tripp Lite WEEE Tripp Lite Tripp Lite Tripp Lite Tripp Lite 1-773-869
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved. SmartOnline is a trademark of Tripp Lite.
SmartOnline™
Single-Phase 5kVA–6kVA
Intelligent True On-Line UPS Systems
• Includes UPS system with internal battery system (5&6kVA),
detachable PDU and detachable parallel PDU modules (6kVA)
Not suitable for mobile applications.
Important Safety Warnings
2
Mounting
3
Connection
9
Features
4
Internal Battery Replacement
28
Español
30
Storage and Service
29
Français
59
Warranty and Product Registration
29
Ðóññêèé
88
Optional Connection
12
Manual Bypass Operation
14
Operation
15
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty