Tripp Lite SMX1500XLRT2U Owner's Manual for 230V 2U Rackmount UPS Systems 9331 - Page 18
Battery Replacement
View all Tripp Lite SMX1500XLRT2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Battery Replacement Under normal conditions, the original batteries in your UPS will last many years. See Safety section before replacing batteries. The batteries are designed for hot-swap replacement (i.e., leaving the UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode and disconnect equipment before proceeding. Note: Refer to the label on the battery retention plate for the R.B.C. part number. SMX1000RT2U Battery Replacement Procedure 1 Remove Front Panel 3 Disconnect Batteries 1 4 x screws 2 Remove Battery Retention Plate 3 4 Remove/Recycle Batteries 2 4 x screws 4 18 12-10-345-93-3184.indb 18 12/14/2012 11:32:11 AM
18
1
3
2
4 x screws
4 x screws
4
Battery Replacement
Under normal conditions, the original batteries in your UPS will last many years. See Safety section
before replacing batteries. The batteries are designed for hot-swap replacement (i.e., leaving the
UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode
and disconnect equipment before proceeding.
Note:
Refer to the label on the battery retention plate for the R.B.C. part number.
SMX1000RT2U Battery Replacement Procedure
2
Remove Battery Retention Plate
3
Disconnect Batteries
4
Remove/Recycle Batteries
1
Remove Front Panel
12-10-345-93-3184.indb
18
12/14/2012
11:32:11 AM