Tripp Lite SMX1500XLRT2U Owner's Manual for 230V 2U Rackmount UPS Systems 9331 - Page 6
Quick Installation - power supply
View all Tripp Lite SMX1500XLRT2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Quick Installation 1 Insert a user-supplied power cord (with country-specific plug) into the UPS Systems IEC inlet connection. Plug the other end into your countryspecific wall outlet.* NOTE! After you plug the UPS into a live AC outlet, the UPS (in "Standby Mode") 1 will automatically charge its batteries, but will not supply power to its outlets until it is turned ON. * See the UPS systems nameplate for input requirements. Additional input cords are also available from Tripp Lite. 2 Plug your equipment into the UPS.* Additional C13-to-C14 interconnection cord(s) are included to connect your equipment to the UPS. NOTE: Additional interconnection cords are available from Tripp Lite. * Your UPS is designed to support only electronic 2 equipment. You will overload the UPS if the total VA ratings for all the equipment you connect exceeds the UPS's Output Capacity. To find your equipment's VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 230 to determine VA. (Example: 1 amp × 230 = 230 VA). If you are unsure if you have overloaded the UPS's outlets, see LOAD icon description in LCD Interface section under Basic Operation. 3 Turn the UPS ON. Press and hold the button A for one second. The alarm will beep once briefly. Note: UPS system will function properly upon initial startup, however, maximum runtime and a successful self-test will only be accessible after it has been charged for 24 hours. 3 A 6 12-10-345-93-3184.indb 6 12/14/2012 11:31:59 AM