Turtle Beach Ear Force PX5 User's Guide - Page 11

1. Power/Pairing LED Indicator A solid LED indicates the transmitter is powered on and communicating with the headset. A pulsing LED indicates the transmitter can't communicate with the headset because it is powered off, not paired, or out of range. If this occurs, please refer to "Pairing the PX5 Headset and Transmitter" on page 10. 2. Digital Input LED Indicator A solid LED indicates when a digital input signal is detected. 3. Dolby ProLogic® IIx LED Indicator A solid LED indicates whenever a digital or analog input signal is being processed by the Dolby Pro Logic IIx decoder. This LED will turn off when the "Dolby Bypass" is ON. 4. Dolby Digital Surround Sound LED Indicator A solid LED indicates whenever a digital input signal is being processed by the Dolby Digital surround sound decoder. This LED will turn off when the "Dolby Bypass" is ON. 5. Dolby Bypass Button and LED Indicator Press to turn OFF Dolby processing. This allows you to hear the unmodified input signal in stereo. A solid LED indicates when the Dolby Bypass is active and Dolby processing is disabled. NOTE: Some presets on the PX5 headset may turn on the "Dolby Bypass" button automatically if the selected preset doesn't utilize Dolby Headphone processing. 6. Wired Headphone Volume Control and Output Jack This may be used for a second headset. Insert a wired headset into this jack to hear the same Dolby 7.1 Surround Sound signal as the wireless headset.* The volume control does not affect the wireless headset. 7. Digital Input Provides digital audio input from the PS3 or XBOX 360 via the included digital optical cable. 8. Digital Output Provides digital audio output via an additional digital optical cable (not included) to connect the PX5 transmitter to your TV/home theater. This allows you to hear your PS3 or XBOX 360 audio on the headset and TV/home theater speakers at the same time. 9. Line In (stereo analog inputs) Use these inputs to connect analog audio sources (TV, MP3 player, etc). If the "Dolby Bypass" is OFF, the analog stereo signal will be processed by the Dolby Prologic IIx decoder, producing an expanded stereo effect. 10. Line In Volume Control Sets the volume of the analog inputs. This control has no effect on the digital signal level. Typically, this should be set to maximum and the headset volume used to adjust the listening level. If the sound distorts, turn down the Line In Volume to prevent overloading the analog inputs. 11. Power Socket Insert the included USB power cable into this socket. Insert the other end into a free USB port on your console. 12. Power Switch Press to turn the transmitter on or off. *Since presets are governed by the PX5 headset, the presets do not apply to a second wired headset. 8