Turtle Beach Ear Force XL1 User's Guide - Page 9

1. Mode Selection Switch Slide to change between PS3, XBOX 360, and PC/Mac modes. 2. LED Indicator A solid LED indicates the Transmitter is powered on and communicating with the Headset. A slowly blinking LED indicates the Transmitter can't communicate with the headset because it is powered off, not paired, or out of range. If this occurs, please refer to "Pairing the Headset and Transmitter" on pg. 8. 3. Pairing Button Press and hold for 3 seconds to activate pairing mode. The LED will begin to blink rapidly. (See "Pairing the Headset and Transmitter" on pg. 8 for further details) 4. Game Audio Input Jack Insert the 3.5mm end of the included RCA Splitter Cable into this jack. 5. USB Port Insert the included Transmitter Power Cable into this port. Insert the other end into an available USB port on your gaming console or computer. 6. Auxiliary Input Jack Provides a 3.5mm input for digital music players or additional audio sources (cable sold separately). The audio from the auxiliary input will be mixed with the game audio and can be adjusted with the game volume control on the headset. NOTE: The auxiliary input is only active in PS3 and XBOX 360 modes. 7. Charging Port Used for recharging the Headset battery. Insert one end of the included Headset Charging Cable into this port and insert the other end into the USB/CHARGE port on the Headset. You can continue to use the headset while charging. 6