Uniden BC235XLT English Owners Manual - Page 12
CRX120 Battery Charger, Charging the Spare Battery - batteries
View all Uniden BC235XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
CRX120 Battery Charger The CRX120 charger allows you to charge the extra battery included with your scanner. You can also charge the battery inside your scanner at the same time. This way you can always have a charged battery ready to go. Charging the Spare Battery To fully charge the extra battery in the CRX120, you should leave the battery in the charger for 14 - 16 hours. 1. Plug the cable from the BP180 into the CHARGE BLK RED connector in the CRX120. Make sure the red wire matches RED and the black wire matches BLK on the charger. 2. Place the battery in the charger, and plug the AC Adapter into a wall outlet. Then connect the adapter to the charger. The red LED on the charger will light, indicating that the battery is charging. DC IN 12 V 12