Uniden BC235XLT English Owners Manual - Page 21
Scanning, deactivate all ten banks at the same time. If you try
View all Uniden BC235XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Scanning 1. After programming frequencies, simply press S to begin scanning. 2. The indicator for each bank which will be scanned appears in the display, while the bank being currently monitored flashes. You can deselect banks from active scanning by pressing their number on your keypad. The indicator for each deselected bank turns off, and the bank's channels are not scanned. Note: One Bank must always be active. You cannot deactivate all ten banks at the same time. If you try to turn all the banks off, the first bank is automatically selected. To restore a bank to active scanning, press the bank's number on your keypad. The bank's indicator will display again. 3. During normal scanning the scanner skips unprogrammed or locked out channels. SCAN 1 CHANNELS 2 3 4 5 6 7 8 9 10 Frequency Frequency not Locked Out entered (L/O) 4. When a transmission is received, the Scanner stops on that channel. When the transmission ends, scanning resumes automatically. 1 2 3 4 5 6 7 8 9 10 21