Uniden BC72XLT English Owners Manual - Page 34

BC72 Paper OM.fm Page 34 Monday, October 25, 2004 3:11 PM 2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly. • If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press then enter the correct frequency. To enter the frequency anyway, press E to accept. 4. To program the next channel in sequence, press E then repeat Steps 2 and 3. Searching For and Temporarily Storing Active Frequencies If you do not have a reference to frequencies in your area, use a search (except weather service search) to find a transmission. Note: When the scanner starts searching, it automatically turns on the delay function. To turn delay on or off, press Func + Dly. Service Search You can search for weather, ham, marine, aircraft, police, or fire transmissions without knowing the specific frequencies used in your area. The scanner is preprogrammed with all the frequencies allocated to these services. To use this feature, press Func and Svc. SRCH appears and the scanner searches starting with the weather service bank. To select a different service bank, repeatedly press Func and Svc. Service mode appears on the display. When the scanner stops on a transmission, press Hold to stop searching and listen to the transmission. Hold appears. In this mode, you can Operation 34