Uniden BC72XLT English Owners Manual - Page 35
Scanning the Stored Channels
UPC - 050633650394
View all Uniden BC72XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
BC72 Paper OM.fm Page 35 Monday, October 25, 2004 3:11 PM press Func + or Func + to step through the frequencies. To release the hold and continue searching, press Hold. Or, if you did not press Hold, simply press Func + or Func + to continue searching. Note: Because there are many different frequencies allocated to fire and police departments, it can take several minutes to search all the service frequencies. Storing Frequencies into Channels During Service Search You can store frequencies you found during service search or service search hold mode into channels. 1. Press Func and Pgm during service search or service search hold mode. The frequency and the lowest blank channel alternately appear. 2. Press E to store the frequency into the blank channel. If you want to select another channel, press Func + or Func + before you press E. You can also use the 0-9 key to select the bank. If you entered a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press then enter the correct frequency. To enter the frequency anyway, press E to accept. Scanning the Stored Channels To begin scanning channels, press Scan. The scanner scans through all non-locked channels in the activated banks. (See "Locking Out Channels" on Page 48 and "Turning Channel-Storage Banks On and Off" on Page 47). When the scanner finds a Operation 35