Uniden BC72XLT English Owners Manual - Page 44

BC72 Paper OM.fm Page 44 Monday, October 25, 2004 3:11 PM 3. Press Func + or Func + . The scanner searches, starting from the frequency you entered in Step 2. If you enter a frequency that is out of range, the scanner sounds an error tone and Error appears. Press Func + to change the search direction downward or Func + to change the search direction upward. Frequencies appear during the search. Notes: • You can set the delay function on or off during the search or while the search stops. • You can skip a frequency when the search stops. After the search skip frequency is set, the scanner starts direct search again. Direct Entry Search Hold Mode To stop searching during direct entry search, press Hold. Hold appears. In this mode, pressing Func + changes the search direction downward and pressing Func + changes the search direction upward. or appears depending on the search direction. Press Func + to decrease the frequency by one step or Func + to increase it by one step. Hold down or for about 1 second to quickly increase or decrease the frequency. To resume direct search, press Func + Src or Hold. or appears on the display, showing the search direction. Special Features 44