Uniden BC72XLT English Owners Manual - Page 53
Resetting the Scanner
UPC - 050633650394
View all Uniden BC72XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
BC72 Paper OM.fm Page 53 Monday, October 25, 2004 3:11 PM Weather scan doesn't work. The squelch might need to be adjusted. The antenna might need to be adjusted. Adjust the squelch threshold. See "Turning On The Scanner and Setting Squelch" on Page 33. Check the antenna connection. Resetting the Scanner If the scanner's display locks up or stops operating properly, you might need to reset the scanner. Caution: This procedure clears all the information you have stored in the scanner. Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly. 1. Turn off the scanner. 2. While holding down 2, 9, and Hold, turn on the scanner. It takes about 3 seconds to initialize and CLEAr appears. Troubleshooting 53