Uniden BC860XLT English Owners Manual - Page 11
Programming, Before the, can scan, you must program a frequency into at least one channel. - scanner manual
View all Uniden BC860XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Programming Before the BC860XLT can scan, you must program a frequency into at least one channel. Repeat this procedure for each channel you program. 1. Select the frequency. 2. Enter MANUAL mode. 3. Select the channel. Á Á 4. Enter the frequency. . To clear a mistake while entering the frequency, press twice, and start over. If the entered frequency is outside the Frequency Range of the scanner, (See Table on page 3, and the Technical Specifications at the back of . this Guide), a distinctive beep sounds. Press and go back to Step 4. 11
Programming
Before the
BC
860
XLT
can scan, you must program a frequency into at least one channel.
Repeat this procedure for each channel you program.
1.
Select the frequency.
2.
Enter MANUAL mode.
3.
Select the channel.
4.
Enter the frequency.
To clear a mistake while entering
the frequency, press
.
twice,
and start over.
If the entered frequency is outside the
Frequency Range of the scanner,
(See Table on page 3, and the
Technical Specifications at the back of
this Guide), a distinctive beep sounds.
Press
.
and go back to Step 4.
11