Uniden BCT7 English Owners Manual - Page 12

Muting the Alert Tone One Moment Mute Press M during the Warning Alert. The Alert Tone stops and the Mute LED flashes until the alarm cycle is finished. Mute LED Flashes WARNING HOLD/RESUME MUTE FIRE/NEWS STATE HIGHWAY Continuous Mute Canceling Mute Á Á Press and hold M for two seconds to turn Continuous Mute To cancel Mute, 1. Press and hold M for two on whenever you wish. You hear seconds. You hear two two beeps and the Mute LED lights beeps and the MUTE LED continuously. No Alert Tones will goes out. sound. 2. Change states or frequency banks. The Mute LED goes out after scanning starts. 3. Turn the scanner off and on. Note: Mute only works in the Highway, Police, and DOT frequency bands. Warning Light Adjustment The Warning Light has three settings: Bright, Dim, and Off. Press SQUELCH to select Bright, Dim or Off. The WARNING light flashes and the alert tone beeps. Á If you select OFF, the FLASH icon in the display reminds you the Warning Light is off. Press In SQ PUSH FLASH 12 WARNING: You can turn off the Warning Light and completely mute the Alert Tone at the same time. This deactivates the Warning Alert.