Uniden CEZ260 English Owners Manual

6. Press

STORE

to save the name.

7. To enter another name and number in a different memory location, return to step

1 and repeat this process.

Storing a Pause in Memory

The

REDIAL/PAUSE

button has dual functionality and becomes a pause button

when pressed in sequence after the

STORE

button. It is valid only when storing a

number into memory locations. Use the

REDIAL/PAUSE

button to insert a pause

when a delay is needed in an automatic dialing sequence (for example, when you

must dial a 9 to get an outside line or when you enter codes to access your long

distance company).

NOTE: A pause is 3 seconds in length and you can store more than one if a

longer pause is needed.

Changing a Stored Number

Repeat the storage sequence under Storing A Name and Number in Memory, and

press

DELETE

to delete the old number before entering the new number.

Erasing a Stored Name & Number

1. Press

STORE

.

2. Press the memory location (

0

to

9

or quick call buttons

A

,

B

, or

C

) to be erased.

3. Press

DELETE

.

Copying Caller ID Memories to User Memory

1. Press

LEFT

or

RIGHT

to view the caller number and name you want to copy.

2. Press

STORE

.

3. Press the memory location (

0

to

9


A

,

B

, or

C

). The number

flashes if there is a number already stored in that memory location.

4. Press

STORE

to enter Edit mode, and then press

STORE

again to edit the name.

NOTE: Select a different memory location by using

LEFT

and

RIGHT

to scroll

through 0 - 9 or quick call buttons A, B, or C.

5. Press

STORE

to confirm and save. Wait three seconds to exit.

NOTE: If the name you want to enter is longer than 12 characters, only the

first 12 characters will be copied into memory.

Storing a Redial Number to Memory

1. Press

STORE

.

2. Press any key (

0

to

9


A

,

B

, or

C

) for the memory location. If a

number is already stored in the memory location, it will appear on the display. Use

LEFT

and

RIGHT

to select a different location.

3. Press

STORE

again to confirm.

4. Press

REDIAL/PAUSE

, and then press

STORE

again.

5. Enter the name, if necessary, and then press

STORE

to confirm.

Copying a Redial Number to Memory

1. Press

REDIAL/PAUSE

while on-hook.

Redial number will display along with

PICKUP PHONE.

2. Press

STORE

.

3. Press any key (

0

to

9


A

,

B

, or

C

) for the memory location. If

there is a number already stored in the memory location, it will appear on the

display. Use the

RIGHT

or

LEFT

buttons to select a different location.

4. Press

STORE

twice.

5. Enter name, if necessary, and then press

STORE

again to confirm and save.

Dialing Numbers Stored in Memory

1. Press

DIAL

.

2. Press a memory location button or use

LEFT

or

RIGHT

to scroll through stored

memory locations to find the desired number. The number in that memory

location displays.

3. Press

SPEAKER

or pick up the handset to dial the displayed number.

OR

1. Lift the handset or press

SPEAKER

.

2. Press a memory location button or use

LEFT

or

RIGHT

to scroll through stored

memory locations to find the desired number. The number in that memory

location displays.

3. Press

DIAL

again to dial the stored number.

Using Chain Dialing

This process allows you to dial a succession of stored numbers from separate memory

locations. This is useful when you must dial several sequences of numbers, such as

with frequent calls via a telephone company long distance provider.

For example

Memory location

Local access number of long distance company

6

Authorization code (ID)

7

Long distance phone number

8

1. Pick up the handset or press

SPEAKER

.

2. Press

DIAL

, then press

6

for the memory location.

3. Press

DIAL

, then press

7

for the memory location.

4. Press

DIAL

, then press for the memory location.

5. The number dials automatically.

Pre-Dialing

1. With the handset on the cradle, enter the telephone number you wish to call. The

telephone number shows in the display.


SPEAKER

and the number automatically dials.

NOTE: Use

DELETE

to delete an incorrectly entered number.

Troubleshooting Tips

Problem

Resolution

No Dial Tone.

1. Check all cabling to make sure that all connections are

secure and undamaged.

2. Check hook switch: Does it fully extend when handset

is lifted from cradle?

3. Try switching between tone and pulse.

No Information is

Shown After the

Phone Rings

1. Are you subscribed to Caller ID service from your local

telephone company?

2. Be sure to wait until the second ring before answering.

1. Press and release

*TONE

.

2. Proceed with conversation.

3. When you hang up, the telephone automatically returns to pulse dialing mode.

TIP: Temporary Tone can also be used while storing numbers in memory by

pressing

*TONE

at the necessary point in the storage sequence.

Caller ID (CID) Features

IMPORTANT: To use all the features of this telephone, you must subscribe

to two separate services from your local telephone company: the standard

Name/Number Caller ID Service to know who is calling when the phone

rings, and Call Waiting Caller ID Service to know who is calling while you

are on the phone.

This unit receives and displays information transmitted by your local phone company.

This information can include the phone number, date, and time, or the name, phone

number, date, and time. The unit can store up to 75 calls for later review. When the

memory is full, a new call automatically replaces the oldest call in memory. NEW

appears in the display for calls received that have not been reviewed.

CID Screen

The CID main screen shows the current time, date, and number of new calls (i.e., the

number of new calls since the last time the call list was reviewed). It displays until

any button is pressed.

NOTE: The number of new calls displays until all new calls are reviewed.

Caller ID Display Messages

The following messages display for incoming calls. They provide phone status or

Caller ID information:

BLOCKED CALL

The caller of the incoming call is registered as “Private

Number” and their Caller ID information is withheld.

CALL WAITING

Indicates a call is waiting on the line.

INCOMPLETE DATA

Caller information has been interrupted during

transmission or the phone line is excessively noisy.

NO CALLS

The caller memory is empty.

NO DATA

No Caller ID information was received.

START/END

You are at the beginning or the end of the Caller ID

memory log.

UNKNOWN CALLER

The incoming call does not have Caller ID service or

their service area is not linked to yours. If UNKNOWN

CALLER appears along with a calling number, the name

information for that number was not available.

Reviewing CID Records

Press

LEFT

or

RIGHT

to view the call records.

• Press

LEFT

to scroll through the call records from the oldest to the newest.

• Press

RIGHT

to scroll through the call records from the most recent to the oldest.

When all of the records have been viewed, START/END appears in the display.

Dialing Back

When reviewing Caller ID records, you can dial back a displayed number.

NOTE: If PICKUP PHONE shows in the display, no other changes to the

number can be made. The information sent from the telephone company

is known to be a valid number for dialing back (used only in very limited

areas). Once you pick up the phone, the number is automatically dialed.

If You Did Not Program Your Local Area Code

1. Use

LEFT

or

RIGHT

until the number you want to dial displays. You will only see

10-digit numbers (i.e. 234-555-1234).

NOTE: A timer (10 seconds on-hook and 3 seconds off-hook) located in the

upper right side of the display will start, indicating how much time is left

until the unit returns to the Summary Screen.

2. Press

DIAL

.

If You Programmed Your Local Area Code

1. Press either

LEFT

or

RIGHT

until the number you want to dial displays. Number

with seven digits (i.e. 555-1234) are within your area code; however, this does not

guarantee the call is a local call. A number with 10 or

11 digits (i.e. 1-234-555-

1234) is not a local call.

NOTE: A timer (10 seconds on-hook and 3 seconds off-hook) located in the

upper right side of the display will start, indicating how much time is left

until the unit returns to the Summary Screen.

2. Press

DIAL

.

3. If the phone is on-hook and PICKUP OR ADJ displays (or ADJUST if you are off-

hook), adjust the phone number format by pressing

DIAL

repeatedly to scroll

through the 7, 10, and 11-digit numbers.

4. To dial the displayed number with the phone on-hook, pick up the handset or

press

SPEAKER

before the timer reaches 0. Press

DIAL

. If the phone is off-hook,

wait until the time reaches 0. NOW DIALING displays and the number is dialed.

Deleting CID Records

1. To delete the record shown in the display, press

DELETE

once.

2. To delete all records while reviewing, press and hold

Delete

for about three

seconds. DELETE ALL? appears in the display.

3. Press

DELETE

again to complete.

Storing a Name and Number in Memory

1. Press

STORE

. LOCATION? shows in the display.

2. Press the desired memory location (

0

to

9


A

,

B

, or

C

.)

NOTE: Press

LEFT

or

RIGHT

to scroll through 0 - 9 or quick call buttons A, B,

or C to select a location.

3. Press

STORE

again to confirm the memory location.

NOTE: Use Delete to erase existing memories or to correct errors.

4. Use the number keys to enter the telephone number (up to 32 digits) and then

press

STORE

to save. (The unit will not dial a phone number in this mode.) The

cursor automatically moves to the text line for name entry.

5. Use the number keys to enter the name of the person associated with the

telephone number you just entered. More than one letter is stored in each of the

number keys. Press the keys multiple times to scroll through the letters for that

key. For example, to enter “B,” press “2” twice. Press

LEFT

two times to create a

space.

NOTE: The flashing cursor automatically moves to the next position or you

may press

LEFT

or

RIGHT

to move the cursor to the next position.

Important Safety Instructions!

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT

TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMAT

ION

POINT WITHIN TH

E

TRIANGLE IS A

WARNING SIGN

ALERTING YOU

OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYIN

G

THE PRODUCT.

CAUTION:

When using your telephone equipment, basic safety precautions should always be

followed to reduce the risk of fire, electric shock and injury to persons, including the

following:



This unit is NOT waterproof.

DO NOT expose it to rain or moisture.



Do not use this unit near water, for example, near a bath tub, wash bowl, kitchen sink

or laundry tub, in a wet basement or near a swimming pool.



Avoid using a telephone (other than a cordless type) during an electrical storm. There

may be a remote risk of electric shock from lightning.



Do not use the telephone to report a gas leak in the vicinity of the leak.



Use only the power cord and batteries indicated in this manual. Do not dispose of

batteries in a fire. They may explode. Check with local codes for possible special

disposal instructions.



Do not place the handset in any charging cradle without the battery installed and the

battery cover securely in place.



Never install telephone wiring during a lightning storm.



Never touch uninsulated telephone wires or terminals unless the telephone line has

been disconnected at the network interface.



Use caution when installing or modifying telephone lines.



Never install telephone jacks in wet locations unless the jack is specifically designed for

wet locations.

SAVE THESE INSTRUCTIONS!

Before You Begin

Parts Checklist

Make sure your package includes the following items:

Base

Handset

Handset

cord

Desk stand (might

be attached to base)

2-wire telephone

line cord

Telephone Jack Requirements

A RJ11C type modular telephone jack similar to image at

right is required. If necessary, call your local phone company

to get one installed.

Installation

Placing the Unit

Place your phone on a level surface such as a desk or table top, or mount it on a wall.

For best speakerphone performance, avoid the following:

•

Areas with high background noise; the microphone may pick up the sounds and

prevent the phone from going into receiving mode when you finish talking.

•

Surfaces affected by vibration.

•

Recessed areas such as corners, under cupboards, or next to a cabinet, which can

generate an echo effect.

Installing (or Replacing) the Batteries

CAUTION: Disconnect the phone cord from the wall outlet before

installing or replacing the batteries.

Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and storing Caller

ID records and for storing saved numbers (memory dial, pulse dial, and redial.)

IMPORTANT: You will have approximately 90 seconds to replace the

batteries before the stored records and numbers are lost. Please read the

instructions before replacing the batteries and have the batteries ready to

be inserted beforehand.

Modular

telephone

line jack

Wall plate

Problem

Resolution

Phone Dials in Pulse

with Tone Service

Make sure T/P MODE is set to TONE DIAL.

Phone Won’t Dial Out

with Pulse Service

Make sure T/P MODE is set to PULSE DIAL.

Phone Does Not Ring

1. Make sure ringer switch is ON.

2. You may have too many extension phones on your

line. Try unplugging some extension phones.

3. Check for dial tone. See Troubleshooting Tips for No

Dial Tone.

Incoming Voice

Volume Low

1. Are other phones off

hook at same time? If so, this is

normal condition as volume drops when additional

phones are used at once.

2. Check the handset receiver or speaker volume.

Incorrect memory

dialing

Make sure you correctly entered the numbers into

memory.

General Product Care

Follow these guidelines to care for your phone:

1. Do not put it near heating appliances or devices that generate electrical noise (for

example, motors or fluorescent lamps).

2. DO NOT expose it to direct sunlight or moisture.

3. Handle it carefully.

4. Clean it with a soft cloth.

5. Never use a strong cleaning agent or abrasive powder because this will damage

the finish.

6. Retain the original packaging in case you need to ship it at a later date.

Compliance Information

Hearing Aid Compatibility (HAC)

This telephone system meets FCC/Industry Canada standards for Hearing Aid

Compatibility.

FCC Part 68 information

This equipment complies with Part 68 of the FCC rules & the requirements adopted

by the ACTA. On the bottom of this equipment is a label that contains, among other

information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this

number must be provided to the phone company.

An applicable Universal Service Order Codes (USOC) certification for the jacks used in

this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved

terminal equipment. A plug & jack used to connect this equipment to the premises

wiring & telephone network must comply with the applicable FCC Part 68 rules &

requirements adopted by the ACTA. A compliant telephone cord & modular plug is

provided with this product. It is designed to be connected to a compatible modular

jack that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a

phone line. Excessive RENs on a phone line may result in devices not ringing in

response to an incoming call. In most but not all areas, the sum of RENs should not

exceed five (5.0). To be certain of the number of devices that may be connected to

a line, as determined by the total RENs, contact the telephone provider. The REN for

this product is part of the product identifier that has the format US:AAAEQ##TXXXX.

The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of

0.3).

If this equipment causes harm to the telephone network, the telephone company

will notify you in advance that temporary discontinuance of service may be required.

But if advance notice isn't practical, the telephone company will notify the customer

as soon as possible. Also, you will be advised of your right to file a complaint with the

FCC if you believe it is necessary. The telephone company may make changes in its

facilities, equipment, operations or procedures that could affect the operation of the

equipment. If this happens, the telephone company will provide advance notice in

order for you to make necessary modifications to maintain uninterrupted service.

Please follow instructions for repairing, if any (e.g. battery replacement section);

otherwise do not substitute or repair any parts of the device except as specified in this

manual. Connection to party line service is subject to state tariffs. Contact the state

public utility commission, public service commission or corporation commission for

information. This equipment is hearing aid compatible.

If you experience trouble with this equipment, contact the manufacturer (see

the cover of this manual for contact information) or an authorized agent. If the

equipment is causing harm to the telephone network, the telephone company may

request that you disconnect the equipment until the problem is resolved.

If your home has wired alarm equipment connected to a phone line, be sure that

installing the system does not disable your alarm equipment. If you have questions

about what will disable alarm equipment, contact your telephone company or a

qualified installer.

Any changes or modifications to this product not expressly approved by the

manufacturer or other party responsible for compliance could void your authority to

operate this product.

NOTICE: According to telephone company reports, AC electrical surges, typically

resulting from lightning strikes, are very destructive to telephone equipment

connected to AC power sources. To minimize damage from these types of surges, a

surge arrestor is recommended.

FCC Part 15 information

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, & (2)

This device must accept any interference received, including interference that may

cause undesired operation. Privacy of communications may not be ensured when

using this phone.

FCC PART 15.105(b)

Note: This equipment has been tested & found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses & can radiate radio frequency energy

and, if not installed & used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off

& on, the user is encouraged to try to correct the

interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

If the low battery icon appears in the display, replace the batteries as soon

as possible to maintain Caller ID operation.

If you are not going to use the telephone for more than 30 days, remove

the batteries because they may leak and damage the unit.

1. If necessary, disconnect the phone line cord and remove the desk stand (turn the

base over, press in on the tabs, and slip them out of the slot.)

2. Unlatch and open the battery

compartment cover.

3. Insert 4 AA-size alkaline batteries as

shown on the diagram.

4. Snap the battery compartment cover into

place and replace the desk stand.

5. Connect the line cord and check your

memory locations.

6. Reattach the desk stand if necessary.

Connecting the Handset

1. Connect one end of the coiled handset

cord to the handset jack.

2. Plug the other end of the coiled handset

cord to the base jack.

3. Place the handset in the cradle.

Setting Up the Phone

Note:

You should not plug the

telephone into the modular jack while

configuring the phone; unplug the

phone if necessary.

REMINDER: The time and date are

programmed automatically when the first Caller ID record is successfully

received after set up.

1. Press

MENU

to access the menu configuration mode.

• Display Language (ENG

FRA

ESP)

• CONTRAST

• LOCAL AREA CODE

• TONE/PULSE

2. Press

MENU

to scroll through the 4 menu screens.

3. Use

LEFT

or

RIGHT

to select the desired setting.

4. Press

MENU

to save.

NOTE: The phone returns to the Summary Screen 20 seconds after an entry.

Display Language

This adjustment lets you display Caller ID prompts in English, French, or Spanish.

1. Press

MENU

until ENG FRA ESP appears in the display.

2. Use

LEFT

or

RIGHT

to select ENG, FRA, or ESP.

3. Press

MENU

to save.

Contrast

This adjustment lets you adjust the display’s contrast [1 (lightest) to 5 (darkest)].

1. Press

MENU

until CONTRAST shows in the display.

2. Use

LEFT

or

RIGHT

to select a level.

3. Press

MENU

to save.

Local Area Code

The telephone uses programmed area codes to determine the number format

to display when a valid Caller ID signal is received.

If you enter your area code,

incoming local calls will display as a 7-digit number.

If...

The phone displays a ...

Incoming area code matches the

programmed area code

7-digit number

(555-5555)

Incoming area code does not

match the programmed area code

10-digit number (3-digit area code +

7-digit phone number)

(444-555-5555)

11-digit number (1 + 3-digit area code

+ 7-digit phone number)

(1-444-555-5555)

1. Press

MENU

until LOCAL AREA CODE shows in the display.

2. Enter the area code on the number pad.

NOTE: If you need to edit your entry, use

LEFT

or

RIGHT

to select an

entered number; re-enter it. You can also press DELETE to erase all the

digits and start over.

3. Press

MENU

to save.

Dialing Mode

This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.

1. Press

MENU

until 4 TONE PULSE shows in the display

2. Press either

LEFT

or

RIGHT

to select a dialing mode (default = Tone).

3. Press

MENU

to save.

Connecting the Telephone Line

1. Connect one end of the straight telephone line cord to the jack on the back of the

base.

2. Connect the other end to a wall phone jack.

3. Set the RINGER volume switch located on the right side of the base to the desired

volume.

• OFF - Telephone will not ring.

• LO - Lowest volume.

• HI - Highest volume.

4. Lift the handset and check for dialtone.

• If dialtone is present, make a test call. If the test call is successful, set the display

language as in the following section.

• If dialtone is not present, check the connections.

• If dialtone does not break, change the dialing mode (refer to the Setting Up the

Phone section ).

Model CEZ260

Speakerphone with 13

Number Memory User’s

Guide

Wall Mounting (Optional)

Your speakerphone can also be mounted on the wall using a standard telephone wall

plate.

REMINDER: To prevent the handset from falling out of the cradle while the

phone is hanging on the wall, adjust both the handset hook and the desk

stand to their wall-mount positions.

1.On the base front, pull the handset hook out of

the slot. Rotate the hook 180 degrees and flip it

from front to back. Slide it back into the slot.

2.Turn the base over and remove the

desk stand.

3.Rotate the stand 180 degrees, and insert WALL hooks into WALL notches. Press in

on tabs and snap the stand into place.

4.Connect the telephone

line cord to the wall jack

and phone. Wrap excess

cord around the cord

hooks as shown.

5.Place the mounting

slots over the pins on

the wall plate and slide

the base down to lock it

into place.

Telephone Basics

Display

Volume

(+,

−

)

button

Speaker

button

A, B, C

(quick call)

*

/TONE

LEFT, RIGHT

Store

button

Menu

button

Delete

button

Boost

button

Mute

button

Dial

button

Redial

button

Flash/Exit

button

Making Phone Calls


SPEAKER

. Wait for a dial tone.

2. Dial the telephone number.

3. Replace the handset or press

SPEAKER

to hang up after your conversation.

Answering Phone Calls


SPEAKER

to answer the call.

2. Replace the handset in the cradle or press

SPEAKER

to hang up.

Adjusting the Handset Receiver Volume

Press

+

or

−

to adjust the handset receiver volume. REC (Handset Receiver) volume

displays.

Boosting the Volume for a Call

Press

Boost

to temporarily boost the handset receiver volume during a call. Press it

again to cancel. Volume levels also return to normal when the handset is replaced on

the base after a call.

1. Set the volume to minimum. Pick up the handset and press

Boost

to turn on the

incoming voice amplifier. The indicator around the button illuminates.

2. Adjust the volume by pressing

+

or

−

When

BOOST

is pressed , volume

increases by up to 20dB of gain and level control.

Boost

resets after you hang up.

NOTE: The Boost feature applies only to the handset.

Redialing a Number

Press

REDIAL/PAUSE

after you hear a dial tone to redial the last number.

NOTE: The redial feature holds the last number (up to 32 digits) that you

dialed in memory.

If you pressed any other numbers after dialing the

phone number (for example, when accessing a voice-menu system) then

those numbers are also dialed.

If you get a busy signal, press

Redial/Pause

again without hanging up.

Using the Speakerphone

•

When using the handset, press the

SPEAKER

button to activate the

speakerphone. Hang up the handset.

•

To return to handset operation, pick up the handset and then press the

SPEAKER

button to disconnect the speakerphone.

•

Speakerphone operation is similar to a two-way radio; you can only listen or talk

at one time.

•

Stay reasonably close to the phone so that you can be clearly heard by the person

to whom you are talking.

•

Adjust the speaker volume by pressing

+

or

−

.

•

The speakerphone indicator light comes on when the speakerphone is in use.

Muting the Microphone

Use

MUTE

to turn the microphone in the handset or the speakerphone on and off

.

1. Press

MUTE

. The mute indicator lights up, indicating the microphone is turned off

.

2. Press

MUTE

again. The microphone turns back on and the mute indicator light

goes off

.

Using the Flash Button

Press

FLASH/EXIT

to activate special features of your telephone network, such as call

transfer, or special services from your local telephone company, such as call waiting.

Temporary Tone Dialing

If you have pulse (rotary) service and want to access customer calling services (such

as telebanking and long distance services) that require tone dialing, use this feature

to temporarily change from pulse to tone service.

After dialing the telephone number and connecting to the customer calling service,

RF exposure information

This product complies with FCC radiation exposure limits under the following

conditions:



The base must be placed to allow a minimum of 20 cm (8 inches) between the antenna

and all persons during normal operation.



The base must not be collocated or operated in conjunction with any other antenna or

transmitter.

Industry Canada (I.C.) Notice

Terminal equipment

THE CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

NOTICE: This equipment meets the applicable

Industry Canada Terminal Equipment

Technical Specifications. This is confirmed by the registration number. The

abbreviation

IC

before the registration number signifies that registration was

performed based on a Declaration of Conformity indicating that Industry Canada

technical specifications were met. It does not imply that Industry Canada approved

the equipment.

NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked

on the equipment itself. The REN assigned to each terminal equipment provides

an indication of the maximum number of terminals allowed to be connected to a

telephone interface. The termination on an interface may consist of any combination

of devices subject only to the requirement that the sum of the Ringer Equivalence

Numbers of all the devices does not exceed 5.

Radio equipment

The term

IC

before the radio certification number only signifies that Industry

Canada technical specifications were met. Operation is subject to the following two

conditions: (1) this device may not cause interference, & (2) this device must accept

any interference, including interference that may cause undesired operation of the

device. "Privacy of communications may not be ensured when using this telephone".

Licensing

Licensed under US Patent 6,427,009.

One-year Limited Warranty

Important: Evidence of original purchase is required for

warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)

ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner,

this Uniden Product to be free from defects in materials & craftsmanship with only the

limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original user shall terminate & be of no

further effect 12 months after the date of original retail sale. The warranty is invalid if

the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified,

altered, or used as part of any conversion kits, subassemblies, or any configurations

not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other

than an authorized Uniden service center for a defect or malfunction covered by this

warranty, (E) used in any conjunction with equipment or parts or as part of any system not

manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed

by the owner’s manual for this product.

STATEMENT OF REMEDY: In the event that the product does not conform to this warranty

at any time while this warranty is in effect, warrantor will either, at its option, repair

or replace the defective unit & return it to you without charge for parts, service, or any

other cost (except shipping & handling) incurred by warrantor or its representatives in

connection with the performance of this warranty. Warrantor, at its option, may replace

the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS

THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT & IS IN LIEU OF & EXCLUDES

ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED

OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS

WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or

limitation of incidental or consequential damages so the above limitation or exclusion

may not apply to you.

LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other

rights which vary from state to state. This warranty is void outside the United States of

America & Canada.

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the

instructions in the owner’s manual you are certain that the Product is defective, pack

the Product carefully (preferably in its original packaging). Disconnect the battery from

the Product & separately secure the battery in its own separate packaging within the

shipping carton. The Product should include all parts & accessories originally packaged

with the Product. Include evidence of original purchase & a note describing the defect that

has caused you to return it. The Product should be shipped freight prepaid, by traceable

means, to warrantor at:

Uniden America Service

4700 Amon Carter Blvd.

Fort Worth, TX 76155

Uniden® is a registered trademark of Uniden America Corporation.

The pictures in this manual are used for examples only. Your actual phone may not look

exactly like the pictures.

© 2009 Uniden America Corporation, Fort Worth, Texas

Printed in China

Uniden CEZ260 English Owners Manual

Uniden CEZ260 Manual

Uniden CEZ260 manual content summary: