Uniden DECT1480-3 English Owners Manual - Page 19

To... From the base From a handset answer the call NA Press Talk/flash. mute the call screen without answering* Press Play/stop. Press End or return the handset to the cradle. * If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can also use your answering system from any touch-tone phone. Before you can use this feature, you must program a security code. Programming a security code 1. With the phone in standby, open the menu from any handset. 2. Select Ans. Setup, then select Security Code. . Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you're finished. Remember to make a note of your new security code! Dialing In to Your System 1. Call your telephone number and wait for the system to answer. (If your answering system is off, it will answer after ten rings and sound a series of beeps instead of your greeting.) 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. . The system announces the current time, the number of messages stored in memory, and a help prompt. It will beep intermittently to let you know it's waiting for your command. 4. When you hear beeping, 01 Repeat message enter a 2-digit 02 Play message command from 03 Skip message 05 Stop playback 06 Turn the system on 09 Turn the system off this chart: 04 Delete message 10 Hear help prompts 19