Uniden DECT1480-3 English Owners Manual - Page 3
Getting Started - handset
UPC - 050633272879
View all Uniden DECT1480-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
SAVE THESE INSTRUCTIONS! CAUTION! Risk of explosion if battery is replaced by an incorrect type! Dispose of used batteries according to the instructions. Do not open or mutilate the battery. Disconnect the battery before shipping this product. For more details, see the Important Information section. Getting Started Installing Your Phone Charge the Battery 1. Unpack all handsets, battery packs, and battery covers. If you need to remove a battery cover, press in on the notch and slide the cover down and off. 2. Line up the battery connector with the jack inside the handset. (The battery connector will only fit one way.) . Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected. 4. Replace the battery cover and slide it into place. . Connect the AC adapters to the AC IN 8V jacks on the base and on each charger. Set the plugs into the notches. . Plug the other end of the adapters into standard 120V AC outlets. 7. Place one handset in the base and the other(s) in the charger(s) with the displays facing forward. The display on each handset should light up; if it doesn't, reseat the handset or try plugging the AC adapter into a different outlet. Charge all handsets completely (about 15 hours) before using them.