Uniden G755 User Guide - Page 7

Setting Up The Equipment - camera

Get Uniden G755 PDF manuals and user guides View all Uniden G755 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Light Link status State Flashing On (Green) Off What it means The camera is in pairing mode. The camera is connected to the receiver. The camera is in standby. Setting Up the Equipment Set Up the Receiver 1. If you are using the receiver as a stand-alone unit, flip out the stand on the back of the receiver, and extend the antenna. Connect an AC adapter to the power input on the side of the receiver. If you are using the receiver in the cradle, insert the receiver into the cradle and connect an AC adapter to the input on the back of the cradle. 2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet. 3. Press and hold the Power button on the top of the receiver for 3 - 4 seconds to power it up. 4. The receiver displays the Uniden Welcome screen for a few seconds and then transitions to the LIVE view. The screen remains dark until the cameras are powered up. Mount the Camera Stand General Guidelines The Uniden Guardian GC45 cameras included with your receiver are weatherproof and have an IP66 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged underwater. Although the cameras can be exposed directly to the rain, it is recommended that, if they are used outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs used for night vision, thus causing lower quality video. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
7
Light
State
What it means
Link
status
Flashing
The camera is in pairing mode.
On
(Green)
The camera is connected to the receiver.
Off
The camera is in standby.
SETTING UP THE EQUIPMENT
SET UP THE RECEIVER
1.
If you are using the receiver as a stand-alone unit, flip out the stand on the back of the receiver,
and extend the antenna. Connect an AC adapter to the power input on the side of the receiver.
If you are using the receiver in the cradle, insert the receiver into the cradle and connect an AC
adapter to the input on the back of the cradle.
2.
Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.
3.
Press and hold the
POWER
button on the top of the receiver for 3 - 4 seconds to power it up.
4.
The receiver displays the Uniden
Welcome
screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.
MOUNT THE CAMERA STAND
GENERAL GUIDELINES
The Uniden Guardian GC45 cameras included with your receiver are weatherproof and have an
IP66 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be
submerged underwater.
Although the cameras can be exposed directly to the rain, it is recommended that, if they are used
outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater
drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared
LEDs used for night vision, thus causing lower quality video.