Uniden LTD1025 English Owners Manual
Uniden LTD1025 Manual
 |
View all Uniden LTD1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Uniden LTD1025 manual content summary:
- Uniden LTD1025 | English Owners Manual - Page 1
LTD1025 - Uniden LTD1025 | English Owners Manual - Page 2
Maritime Radio Services Operation Warning! This transmitter will operate on channels/ frequencies that have restricted use in the United States. The channel assignments include frequencies assigned for exclusive - Uniden LTD1025 | English Owners Manual - Page 3
Contents Uniden OCEANUS 1 Controls and Indicators 2 Front Panel 2 Rear Panel Connectors 3 Multi-Function Keys 5 Installation 7 Choosing a Location 7 Engine Noise Suppression 8 Antenna Considerations 8 Installing the OCEANUS 9 Operation 10 Triple Watch 10 Manual Tuning 10 Instant Channel - Uniden LTD1025 | English Owners Manual - Page 4
that will provide you with years of trouble-free service. With proper care and maintenance, your Uniden OCEANUS will outlast your present vessel and are encouraged to thoroughly read the rest of this Operating Guide to acquaint yourself with the characteristics and operation of your transceiver - Uniden LTD1025 | English Owners Manual - Page 5
Controls and Indicators Front Panel 10 12 3 5 8 4 5678 9 1. CHANNEL - This control is used to manually select the desired Communication Channel (01 - 28 and 60 - 88), or Weather Channel (0 - 9). 2. LCD Panel - Indicators for TX, SCAN, TRI, U, I, C, HI, LO, MEM, WX, WX - Uniden LTD1025 | English Owners Manual - Page 6
Rear Panel Connectors 11 12 13 14 11. (Ground) PA Speaker Out (using supplied pins) +13.8V Ground 12. Antenna Connector - Connect the antenna here using a type PL259 connector. 13. Remote Speaker Connector - An external 4 ohm, 4 Watt speaker may be connected to this jack. The connecting wire - Uniden LTD1025 | English Owners Manual - Page 7
18 19 20 21 17 22 16 15 24 23 15. U (US) - Indicates US Channel Mode. I (International) - Indicates International Channel Mode. C (Canada) - Indicates Canada Channel Mode. 16. TRI (Triple Watch) - Indicates Triple Watch Mode is in effect. 17. SCAN - Indicates Normal Scan Mode. 18. TX ( - Uniden LTD1025 | English Owners Manual - Page 8
Multi-Function Keys 4 5678 4. WX (Weather) - This key is used to switch between monitoring weather channels and communication channels. This key is also used to activate the Weather Alert Mode. • Press WX to switch between weather and communication channels. • Press and hold WX to turn the Weather - Uniden LTD1025 | English Owners Manual - Page 9
6. MEM - This key enters channels in the Memory Scan Mode. When used in conjunction with H/L, the LCD Panel brightness can be adjusted. When used in conjunction with the 16/9 key, the Channel Mode of Operation can be selected. • Press MEM to enter a selected channel in Memory Scan Mode. • Press and - Uniden LTD1025 | English Owners Manual - Page 10
in selecting the location for your OCEANUS: 1. Select a location that is free from spray and splash. 2. Keep the battery leads as short as possible. Direct connection to the battery is most desirable. If direct connection cannot be made with the supplied power lead, any extension should be made with - Uniden LTD1025 | English Owners Manual - Page 11
electrical systems of engines is sometimes a problem with radios. The OCEANUS has been reduce the effect of noise interference. All DC battery wires, antenna lead, and accessory cables should recommended you draw upon the advice of your Uniden Dealer in determining a suitable antenna for your vessel - Uniden LTD1025 | English Owners Manual - Page 12
hardware. Do not use it for installing the radio in the mounting bracket. Connect the red wire of the supplied power cord to the positive (+) battery supply. Connect the black wire of the power cord to ground. The power cord is equipped with a fuse to protect the radio. Use only a Six - Uniden LTD1025 | English Owners Manual - Page 13
on that channel until the signal ends. Press and hold 16/9 until a tone is heard to cancel Triple Watch Mode. Manual Tuning To manually select a channel, press the CHANNEL L/M buttons (L/M) to select the desired channel. Weather Channels are located on Channels 0 - 9. Communication Channels are - Uniden LTD1025 | English Owners Manual - Page 14
To cancel Channel 16/Channel 9 communications: • Press 16/9 until previous channel setting appears. -or- • Press WX. Weather Scan To scan only Weather Channels 0 - 9, press WX, and then press and hold STEP. The WX indicator will appear on the LCD Panel, indicating Weather Mode. To exit from Weather - Uniden LTD1025 | English Owners Manual - Page 15
the Weather Alert Mode: 1. Press WX to select Weather mode press and hold WX. 2. Press and hold STEP to begin Weather Channel Scan. -or- 1. Manually select the active Weather Channel after selecting WX. 2. Press and hold WX to activate the Weather Alert Mode. To cancel the Weather Alert Mode, press - Uniden LTD1025 | English Owners Manual - Page 16
Transmitting When the power is turned on, the transmitter is set for 25 Watts (except for USA Channels 13 and 67, and CANADA channels 13, 15, 17 and 20). The HI indicator will appear on the LCD Panel, indicating 25 Watt output power. In order to comply with FCC Regulations contained in 47 CFR 80.215 - Uniden LTD1025 | English Owners Manual - Page 17
VHF FM Marine Radio Telephone Channel and Functions (USA Channels) CHANNEL DESIG WX0 WX1 WX2 WX3 WX4 WX5 WX6 WX7 WX8 WX9 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 60 61 62 63 64 65 66 67 68 69 71 72 73 74 77 78 79 80 81 82 83 84 85 86 87 88 FREQUENCY (MHz) - Uniden LTD1025 | English Owners Manual - Page 18
VHF FM Marine Radio Telephone Channel and Functions (International Channels) CHANNEL DESIG WXO WX1 WX2 WX3 WX4 WX5 WX6 WX7 WX8 WX9 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 60 61 62 63 64 65 66 67 68 69 71 72 73 74 77 78 79 80 81 82 83 84 85 86 87 88 - Uniden LTD1025 | English Owners Manual - Page 19
VHF FM Marine Radio Telephone Channel and Functions (Canadian Channels) CHANNEL DESIG WXO WX1 WX2 WX3 WX4 WX5 WX6 WX7 WX8 WX9 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 60 61 62 63 64 65 66 67 68 69 71 72 73 74 77 78 79 80 81 82 83 84 85 86 87 88 FREQUENCY - Uniden LTD1025 | English Owners Manual - Page 20
Specification General Channels Controls Status Indicators Channel Display Selector Switch Buttons Connectors Size Weight Supply Voltage Standard Accessories Antenna Impedance Microphone Speaker Operating Temperature Range Shock and Vibration FCC Approvals Transmitter Power Output Power Requirement - Uniden LTD1025 | English Owners Manual - Page 21
Troubleshooting If the OCEANUS does not perform to your expectations, try the suggestions listed below. If you cannot get satisfactory results, call the Uniden Customer Service the particular channel all channel from the of the time. scanner. There is noise on the receiver that the squelch will - Uniden LTD1025 | English Owners Manual - Page 22
your radio. • You are responsible for the continued FCC technical compliance of your radio. • You are urged to arrange for periodic performance checks with your Uniden Marine Dealer. 19 - Uniden LTD1025 | English Owners Manual - Page 23
than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operating Guide for this - Uniden LTD1025 | English Owners Manual - Page 24
Thank you for purchasing a Uniden Marine Radio. © 2002 Uniden America Corporation, Fort Worth TX All rights reserved. Printed in the Philippines UTZZ01881BA
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
