Uniden SC150B English Owners Manual - Page 14

Programming Channels Before you can scan, you must program the channels within a bank. You can store one frequency per channel, up to 100 channels. Save the first 10 channels for sporting events. When you program the appropriate frequencies for an event into these channels, you can use DIRECT CHANNEL SCAN and DIRECT CHANNEL ACCESS to quickly monitor the activities. Note: If appears on the display (keypad locked), unlock the keypad by pressing and holding until disappears. There are two ways to program a channel: n Manually select a channel and frequency, using the numeric keypad. You can determine the frequencies you want from the Betty Bearcat (or similar) Frequency Book (optional), or from the Sports Activity Frequency Book (included). n Search a band to find an active frequency, and then directly store it into the next available channel A. Programming By Manual Entry 1. Select a frequency from the appropriate Frequency Directory. Example: Program 125.2500 MHz into Channel 18. S 2. Make sure the scanner is in the SCAN Mode. If it is in the SRCH Mode, press . B 3. Make sure the scanner is in the BANK Mode. If it is in the DIRECT Mode, press . H 4. Press to stop scanning. 1 8 H 5. Press to go to Channel 18. 6. Enter the frequency number using the numeric keypad. (Be sure to include the decimal point.) 1 2 5 . 2 5. . If you make a mistake and want to clear the entry, press twice and re-enter the frequency. 14