Uniden UDW10003PT English Owners Manual
Uniden UDW10003PT Manual
 |
View all Uniden UDW10003PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Uniden UDW10003PT manual content summary:
- Uniden UDW10003PT | English Owners Manual - Page 1
UDW-10003 Video Surveillance System User's Manual What's in the Box Portable receiver with 3-inch color LCD display Portable video camera Camera stand 24/7 at our website: www.uniden.com. If You... Contact Uniden's... Phone Number have a question or problem Customer Care Line* 817-858-2929 - Uniden UDW10003PT | English Owners Manual - Page 2
manual. Never dispose of any batteries in a fire: they may explode. Check with local codes for possible special disposal instructions between the ages of 13 and 18, review these terms, conditions and safety warnings units are in use. Do not cover the camera or receiver with any object such as a - Uniden UDW10003PT | English Owners Manual - Page 3
cameras 13 Changing to a Different Camera.........14 Setting Up a Scan 15 Using Quad Display 16 To enter quad display 16 To exit quad display 16 Solving Problems 17 Unstable or Weak Signal 18 Weak signal and video performance 18 Noise or Static 19 Resetting Your System 20 Additional - Uniden UDW10003PT | English Owners Manual - Page 4
LINK 2. Connect the other end of each adapter to a standard 120 volt AC indoor outlet. 3. Press the Power button on both the receiver and the camera; the bottom light on the left (the Power status light) should turn on. If... a Power status light doesn't come on Try... - reconnecting the AC - Uniden UDW10003PT | English Owners Manual - Page 5
Channel status 1 Charge status Icon What it means The signal from the camera is 1-low, 2-fair, 3-good, or 4-perfect. There is no signal from the camera. 1 2 3 4 The video currently on the display comes from the camera connected to channel 1, 2, 3, or 4. The battery is charging. This icon - Uniden UDW10003PT | English Owners Manual - Page 6
System Get to Know the Camera What the buttons do Button What it does POWER Turn the camera on. Press and hold to turn it off. Link Enter pairing mode. Battery status Link status Power status What the lights mean Power Status light State On Off What it means The camera is on. The camera - Uniden UDW10003PT | English Owners Manual - Page 7
the mounting post. 4 Adjust the post to the correct angle, then tighten the wingnut to lock the post into place. 4. Tighten the camera brace up against the back of the camera to secure it into place. 5. Unlock the mounting post by turning the wingnut to the left a few turns. 6. Set the mounting - Uniden UDW10003PT | English Owners Manual - Page 8
Get to Know the Receiver Front Status lights: Battery Power BUTTONS: MENU/OK LEFT DOWN SELECT CAMERA Antenna Speaker OK VOL− VOL+ UP RIGHT ZOOM Side (right) Stand POWER USB output Audio/video output Power input What the buttons do Button What it does MENU/ok - Open and close the menu - Uniden UDW10003PT | English Owners Manual - Page 9
battery is fully charged. What the connections do Connector USB output Audio/video output Use it to Connect the receiver to your computer for use with the Uniden Guardian Software. (See the software manual for more information.) Send the signal from the camera to a standard TV (see page 12). - Uniden UDW10003PT | English Owners Manual - Page 10
On (enabled) or Off (disabled). Pair CAM Pair a camera to the selected channel (see page 13). System Setup sub-menu Brightness Adjust the brightness of the display. Choose a value from 1 (min) through 15 (max). TV out Change the video output format from NTSC (North America) to PAL (Europe - Uniden UDW10003PT | English Owners Manual - Page 11
The receiver can zoom in so you can see the video better. In zoom mode, the receiver increases the pixel size Zoomed-in view (QVGA) 1 Tilt up Pan left Pan right Understanding Night Vision The portable camera included with your receiver has 11 infrared LEDs for low-light conditions. Tilt down ► - Uniden UDW10003PT | English Owners Manual - Page 12
RCA composite inputs (maximum 32 inches diagonal recommended) Audio (white) AV out Video (yellow) AC adapter (already connected) To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure - Uniden UDW10003PT | English Owners Manual - Page 13
and the receiver so they can communicate. You'll perform the pairing procedure if you want to add a new camera to your system or if you are having trouble with a camera. 1. Make sure the camera is powered on. 2. On the receiver, open the menu and scroll down to Pair CAM. 3. Use Right or Left to - Uniden UDW10003PT | English Owners Manual - Page 14
a particular channel, the receiver shows a black screen with the message No Signal. 1 2 3 4 NO SIGNAL ► You should only turn a channel On if you have a camera paired to that channel. ► The receiver skips any channels that are set to Off in the menu. 1 2 3 4 (Channel CAM2 set to Off.) 14 - Uniden UDW10003PT | English Owners Manual - Page 15
a particular channel. The receiver won't scan channels. I can't switch channels manually. Try... - Making sure there is a camera assigned the channel. - Making sure the camera is in range of the receiver. - Troubleshoot the camera assigned to that channel. - Making sure the channel is enabled (set - Uniden UDW10003PT | English Owners Manual - Page 16
at the same time. The channels appear in the positions shown to the right: ► If a channel is disabled or there is no signal from 3 the camera, that channel's section of the quad display will be blank. To enter quad display 1. Open the menu. 2. Scroll down to select Scan time. 3. Use - Uniden UDW10003PT | English Owners Manual - Page 17
Solving Problems If you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If... Try.. The image on the display is - Adjusting the brightness on the receiver (in the System Setup sub- too bright. - Uniden UDW10003PT | English Owners Manual - Page 18
the buttons on the receiver respond when I press them. Try.. - Resetting the receiver. Unstable or Weak Signal If the video seems to lag and or the audio sounds weak, the camera and the receiver do not have a strong, clear signal between them. There are several causes for a weak signal: Possible - Uniden UDW10003PT | English Owners Manual - Page 19
want to run the camera at QVGA or zoom mode. When the camera is in zoom mode, it sends fewer pixels to the receiver, so the video performance is not as affected , especially wireless LAN equipment ► other radio-based wireless devices, such as cordless telephones ► wireless controllers, or wireless - Uniden UDW10003PT | English Owners Manual - Page 20
or receiver will erase any changes and set all values back to the default. You should only reset your system under the following conditions: Resetting the camera - You are unable to pair the camera to the receiver. - The image on the screen is frozen. Resetting the receiver - The buttons on the - Uniden UDW10003PT | English Owners Manual - Page 21
Additional Information Product Specifications Radio Frequency Transceiver RF Frequency Modulation Spread spectrum Anti Interference Selectable camera 640 x 480 (VGA)/ 320 x 240 (QVGA) Motion JPEG Auto Auto System Specifications Camera Weight 110 g Receiver 500 g Dimension 115 x 60 x 19 mm 220 - Uniden UDW10003PT | English Owners Manual - Page 22
System Specifications Camera (113° F ) ► Dispose of used batteries according to the instructions. ► Do not open or mutilate the battery. ► Disconnect the charge this battery pack as specified in the owner's manual. Using another charger may damage the battery pack or cause Uniden for recycling. 22 - Uniden UDW10003PT | English Owners Manual - Page 23
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio is connected. ► Consult the dealer or an experienced radio/ television technician for additional suggestions. CAUTION! Any changes or modifications to this - Uniden UDW10003PT | English Owners Manual - Page 24
Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual instructions in the owner's manual
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
UDW-10003 Video Surveillance System
User’s Manual
What’s in the Box
Portable receiver with 3-inch color LCD display
Portable video camera
Camera stand
Two AC adapters
Software CD
AV cable
USB cable
If any items are missing or damaged, contact our Customer Care Line immediately.
Never use damaged products!
Need Help? Get answers 24/7 at our website: www.uniden.com.
If You...
Contact Uniden’s...
Phone Number
have a question or problem
Customer Care Line*
817-858-2929 or 800-297-1023
need a replacement part or accessory
Parts Department*
800-554-3988
need special help due to a disability
Accessibility Help Line
800-874-9314 (voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed business hours.