Uniden UDW20055 English Owners Manual
Uniden UDW20055 Manual
 |
UPC - 050633405017
View all Uniden UDW20055 manuals
Add to My Manuals
Save this manual to your list of manuals |
Uniden UDW20055 manual content summary:
- Uniden UDW20055 | English Owners Manual - Page 1
-20000 Series Video Surveillance System User's Manual What's in the box? UDW20000 receiver with 7‑inch color display and remote control You might also find: Camera stand OK Software CD AC adapter AV cable USB cable UWDC25 wireless weatherproof camera Extension cord Antenna AC adapter If - Uniden UDW20055 | English Owners Manual - Page 2
been dropped or is damaged. Warnings to Parents and Other Users Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution for medial - Uniden UDW20055 | English Owners Manual - Page 3
4 Connect the Power 4 Check the Video Signal 5 Learning Your System 6 Get to Know the Camera 6 What the lights mean 6 Using the Camera Stand 6 Switch the bracket 7 Mount the stand 7 Attach the camera 8 Adjusting the Sun Shield 8 Get to Know the Receiver and Remote 9 What the buttons do - Uniden UDW20055 | English Owners Manual - Page 4
press the Power button on the front of the receiver or on the remote control. 4. Make sure the Power status lights on the front of the receiver and each camera all turn on. If... a Power status light doesn't come on Try... - reconnecting the AC adapter - seeing if the power outlet is controlled by - Uniden UDW20055 | English Owners Manual - Page 5
status icon shows one or two bars or the video quality is poor there is a lot of static on the receiver Try... - making sure the camera is turned on - re-pairing the camera and receiver (see page 14) see page 19 for tips on improving video quality see page 20 for tips on avoiding interference - Uniden UDW20055 | English Owners Manual - Page 6
State Power On status Off Link status Flashing Orange Off What it means The camera is on. The camera is off. The camera is in pairing mode. The camera is connected to the receiver. The camera is in standby. Power connector pigtail Antenna connector Mounting bracket Bracket screws Pairing - Uniden UDW20055 | English Owners Manual - Page 7
1. Hold the base of the camera stand where you want to mount it, and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. 3. Before attaching the camera, tug gently on the stand to make sure it is securely in place. - Uniden UDW20055 | English Owners Manual - Page 8
angle, then tighten the wingnut to lock the post into place. 2. Tighten the camera brace up against the bracket to secure it into place. 3. Unlock the mounting post by turning the wingnut to the check the picture in the receiver display. When the picture is satisfactory, tighten the bolts again. - Uniden UDW20055 | English Owners Manual - Page 9
to Know the Receiver and Remote Display Antenna Link status Signal status Speakers IR sensor SELECT MENU/ DOWN LEFT CAMERA OK ZOOM POWER OK RIGHT UP What the buttons do Button What it does POWER - Turn the receiver on. Press and hold to turn it off. SELECT CAMERA - Cycle through the - Uniden UDW20055 | English Owners Manual - Page 10
item. - In quad display: go to channel 3. Buttons on the remote only: - In zoom mode: pan to the top of the zoom video output Use it to Connect the receiver to your computer for use with the Uniden Guardian Software. (See the software manual for more information.) Send the signal from the camera - Uniden UDW20055 | English Owners Manual - Page 11
of time the receiver spends on each active camera during a scan (see page 16) or activate quad display (see page 17). CAM1 - CAM4 Turn each of the four camera channels On (enabled) or Off (disabled). Pair CAM Pair a camera to the selected channel (see page 14). System Setup sub-menu Brightness - Uniden UDW20055 | English Owners Manual - Page 12
the video better. 1 In zoom mode, the receiver increases the pixel size and focuses on the center of the picture. You will also see the ZOOM icon in the upper right corner of the display. Pan and tilt in zoom mode Once in zoom mode, you can pan and tilt the camera to - Uniden UDW20055 | English Owners Manual - Page 13
white) AV out Video (yellow) AC adapter (already connected) To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure video link. This method is optimized for wireless connections, but it - Uniden UDW20055 | English Owners Manual - Page 14
Multiple Camera Features Your receiver supports a total of four active cameras at a time. You can mix and match any of the accessory cameras. (See our website for compatible camera options.) Pairing Cameras Pairing is like introducing the camera and the receiver so they can communicate. Any cameras - Uniden UDW20055 | English Owners Manual - Page 15
display, then back to the first camera. 1 2 3 4 12 34 ► Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message - Uniden UDW20055 | English Owners Manual - Page 16
won't switch to a particular channel. The receiver won't scan channels. I can't switch channels manually. Try... - Making sure there is a camera assigned the channel. - Making sure the camera is in range of the receiver. - Troubleshoot the camera assigned to that channel. - Making sure the channel - Uniden UDW20055 | English Owners Manual - Page 17
Using Quad Display In quad display, the receiver puts all 1 four channels on the screen at the same time. The channels appear in the positions shown to the right: ► If a channel is disabled or there is no signal from 3 the camera, that channel's section of the quad display will be - Uniden UDW20055 | English Owners Manual - Page 18
see which channel the receiver is on. Make sure the camera assigned to this channel is powered on. - Re-pair the camera to the receiver. The image on the screen is frozen. - Resetting the camera. - Resetting the receiver. None of the buttons on the receiver or the remote respond when I press them - Uniden UDW20055 | English Owners Manual - Page 19
sight between them. - Try moving the camera closer to the receiver. Weak signal and video performance The video performance is directly affected by the signal quality. As the signal weakens degrades, the amount of data transferred decreases, and the video frame rate goes down. The table below shows - Uniden UDW20055 | English Owners Manual - Page 20
don't provide enough improvement in the the signal quality, you may want to run the camera at QVGA or zoom mode. When the camera is in zoom mode, it sends fewer pixels to the receiver, so the video performance is not as affected by the weak signal. Noise or Static The most likely cause - Uniden UDW20055 | English Owners Manual - Page 21
reset the camera or receiver, unplug the AC adapter. Wait at least 15 seconds, then reconnect the AC adapter. Additional Information Product Specifications Radio Frequency Transceiver RF Frequency Modulation Spread spectrum Anti Interference Selectable camera channel Data rate Channel bandwidth - Uniden UDW20055 | English Owners Manual - Page 22
(QVGA) Motion JPEG Auto Auto System Specifications Camera Receiver Weight 240 g 500 g Dimension 175 x 64 x 42 mm 220 x 145 x 36 mm Operating temperature -10° C (+14° F) to +50° C (122° F ) Input voltage 100-240 V AC Uniden for recycling. 22 - Uniden UDW20055 | English Owners Manual - Page 23
accordance with the instructions, may cause harmful user is encouraged to try to correct the interference by one or more of the following measures: ► Reorient or relocate the receiving antenna. ► Move the equipment away from the receiver signifies that Industry Canada technical specifications were - Uniden UDW20055 | English Owners Manual - Page 24
an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
If any items are missing or damaged, contact our Customer Care Line immediately.
Never use damaged products!
Need Help? Get answers 24/7 at our website: www.uniden.com.
If You...
Contact Uniden’s...
Phone Number
have a question or problem
Customer Care Line*
817-858-2929 or 800-297-1023
need a replacement part or accessory
Parts Department*
800-554-3988
need special help due to a disability
Accessibility Help Line
800-874-9314 (voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed business hours.
What's in the box?
If you purchased
model number:
You should
have:
UDW20005
1 of each
UDW20055
2 of each
UDW20555
3 of each
UDW25555
4 of each
You might also find:
UDW-20000 Series Video Surveillance
System User’s Manual
UDW20000 receiver with 7-inch
color display and remote control
Software CD
AC adapter
USB cable
AV cable
UWDC25
wireless
weatherproof camera
Camera
stand
AC adapter
Antenna
Extension
cord
OK