Uniden UIP160P English Owners Manual

Uniden UIP160P Manual

Get Uniden UIP160P PDF manuals and user guides View all Uniden UIP160P manuals
Add to My Manuals
Save this manual to your list of manuals

Uniden UIP160P manual content summary:

  • Uniden UIP160P | English Owners Manual - Page 1
    UIP 160P SERIES OWNER'S MANUAL
  • Uniden UIP160P | English Owners Manual - Page 2
    /Forwards Compatibility Connecting the Expansion Handset Charger Register the Handset Installing the Beltclip Headset Installation Display and Icons Soft Key Function Main Menu Options Setting Menu Options Using the interface Handset Setup Global Setup Using Your Phone Calling with Packet8 service
  • Uniden UIP160P | English Owners Manual - Page 3
    Welcome Features With the UIP160P voice-over-Internet Protocol (VoIP) telephone, Packet8 VoIP service and your broadband connection, you can access the Internet and make phone calls simultaneously. The UIP160P can connect directly to your broadband modem or can connect to a router or switch in your
  • Uniden UIP160P | English Owners Manual - Page 4
    pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, this series has Random Code™ digital security, which automatically selects one of more than
  • Uniden UIP160P | English Owners Manual - Page 5
    tone. • VoIP - Voice over Internet Protocol, a method of sending voice signals over broadband Internet connections. • Station - The main base or any registered handset. • Configuration utility - The internal user interface that allows you to change configurations settings in the UIP160P. You
  • Uniden UIP160P | English Owners Manual - Page 6
    11 12 13 1. Handset Antenna 2. Beltclip Hole 14 3. Speakerphone Speaker and Ringer 4. Handset Battery Compartment 5. New Message LED 6. Handset Earpiece 7. LCD Display 37) 21.Handset Microphone 22.Handset Charging Contacts CONTROLS & FUNCTIONS [5] CONTROLS & FUNCTIONS www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 7
    Contacts 24. Base Antenna 25. Charge LED 26. find hs (handset) (P. 36) 27. pwr (power) LED 28. link LED 29. lan LED 30. wan LED 31. phone LED 32. POWER port www.uniden.com 33. RESET switch 34. INTERNET (WAN) port 35. ETHERNET (LAN) port 36. PHONE port CONTROLS & FUNCTIONS [6] CONTROLS & FUNCTIONS
  • Uniden UIP160P | English Owners Manual - Page 8
    connect the UIP160P to any RJ-11 telephone wall jacks. This could damage the UIP160P or the telephone wiring in the UIP160P. Overheating can cause permanent damage to the unit. • Read the instructions completely before connecting the system to its power source. [7] SETTING UP THE PHONE www.uniden
  • Uniden UIP160P | English Owners Manual - Page 9
    the email address and password used to create the account in the account sign in at the top of the screen.) • If you want to use an analog phone or fax machine with the UIP160P, you will need a standard telephone cable (RJ-11). note If you ordered your UIP160P directly from Packet8, it will already
  • Uniden UIP160P | English Owners Manual - Page 10
    on the UIP160P. If your broadband connection uses PPPoE, you will need to enter your user name and password in step 3. If your broadband provider has given you a static IP address, you will need to enter that information in the UIP160P. See the User Interface Guide at www.uniden.com/voip for more
  • Uniden UIP160P | English Owners Manual - Page 11
    second phone you want to use connect it to RJ-11 port labeled PHONE. CAUTION Do not connect the UIP160P to a regular telephone wall uniden.com note PHONE is not a separate line. Any phone connected to PHONE will share your VoIP line with all the UIP160P's cordless handsets. SETTING UP THE PHONE
  • Uniden UIP160P | English Owners Manual - Page 12
    making a call with the handset and browsing to a web page from your PC. If you have any difficulty, see the Troubleshooting section. See the User Interface Guide at www.uniden.com/voip for more information on configuring your UIP160P. Step 3 Activate your Packet8 Service Once you have connected your
  • Uniden UIP160P | English Owners Manual - Page 13
    THE PHONE Install the rechargeable battery pack into the handset 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment
  • Uniden UIP160P | English Owners Manual - Page 14
    Compatibility Your phone is compatible with other Uniden 5.8GHz Digital Expandable Handsets. Compatible models include the TCX805, TCX400, TCX440, and ELX500. (Please check www.uniden.com for an updated list of expansion handsets compatible with this series.) note Charge the handset battery
  • Uniden UIP160P | English Owners Manual - Page 15
    use them. Only one handset can be registered at a time. note Handsets supplied with the phone are registered to the base by the factory. When you register an extra handset to the base, the handset ID will be assigned. Before an expansion handset is registered, the battery pack MUST be charged for
  • Uniden UIP160P | English Owners Manual - Page 16
    problem with your phone, or if you need to change the digital security code. The digital security code is an identification code used to connect the handset another cordless telephone is using the same security code, you can change the code by de-registering and reregistering all handsets. 1) In
  • Uniden UIP160P | English Owners Manual - Page 17
    cordless handset may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by calling the Uniden Parts Department or visiting the web site. See back cover page.) INSTALLING
  • Uniden UIP160P | English Owners Manual - Page 18
    . This icon changes depending on the battery status (empty, low, medium and full). Standby The Ringer off icon indicates that ringer is turned off. Talk The Mute icon appears when you mute the handset. Talk The Speaker icon appears when the handset speaker phone is used. Talk The Privacy icon
  • Uniden UIP160P | English Owners Manual - Page 19
    the operation of the phone. There are three soft keys on each handset. Soft Keys allow you to: - Access the main menu - Redial one of the last three numbers dialed from the handset The function of each 6CNM /76' /'07 Soft key 2 Soft key 1 Soft key 2 www.uniden.com SOFT KEY FUNCTION [18]
  • Uniden UIP160P | English Owners Manual - Page 20
    Options Your phone has five main menu options: DirectLink Mode, Room Monitor, Handset Setup, Global Setup and Deregister HS. •For Global Setup and Deregister HS menu options, make sure the line is not in use and the handsets are CW on/CWDX off None Tone On [19] MAIN MENU OPTIONS www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 21
    tips for using the software interface on your phone. • Press the MENU soft key to $#%- $#%- 1- Handset Setup The following submenu options must be set separately for each handset. Selecting a . 1) Press the MENU soft key. Select the Handset Setup menu, and then the Ringer Volume submenu.
  • Uniden UIP160P | English Owners Manual - Page 22
    Old MacDonald [Old MacDld]) You must set the ringer tone separately on each handset. 1) Press the MENU soft key. Select the Handset Setup 4KPIGT6QPGU menu, and then the Ringer Tones submenu. (NKEMGT OK soft key. You will hear a confirmation tone. [21] SETTING MENU OPTIONS www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 23
    phonebook entries, the phone uses the distinctive ring Press the MENU soft key. Select the Handset Setup menu, and then the Distinctive Ring allows you to answer the phone simply by removing the handset from the cradle. You do the MENU soft key. Select the Handset Setup menu and then the AutoTalk
  • Uniden UIP160P | English Owners Manual - Page 24
    Answer Any Key Answer allows you to answer the phone by pressing any number key, */tone/ on the handset. 1) Press the MENU soft key. Select the Handset Setup menu, and then the Anykey Answer submenu. OA A UA 2A JA QA PA GA    $#%- &'.'6' 1- [23] SETTING MENU OPTIONS www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 25
    Spanish. 1) Press the MENU soft key. Select the Handset Setup menu, and then the Language submenu. 2) Press 1- Adjusting the LCD Contrast Contrast adjusts the handset LCD brightness. Choose one of the 10 levels Press the MENU soft key. Select the Handset Setup menu and then the LCD Contrast
  • Uniden UIP160P | English Owners Manual - Page 26
    is the tone your keypad makes when keys are pressed. You can turn this tone on or off. 1) Press the MENU soft key. Select the Handset Setup menu and then the Key Touch Tone submenu. 2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off. 3) Press the OK soft key
  • Uniden UIP160P | English Owners Manual - Page 27
    on the LCD screen during a call, ringer volume setting, when you hang up, and so on. 4KPIGT8QNWOG $#%- 1- 1) Press the MENU soft key. Select the Handset Setup menu and then the Animation Screen submenu. 2) Press cid/vol/∧ or redial/p/vol/∨ to select On or Off. 3) Press the OK soft key. You
  • Uniden UIP160P | English Owners Manual - Page 28
    phone 9GNEQOG 2NGCUG9CKV Hanging up the phone 'PF /'07 Confirmation (Done!) &QPG Deleting (Deleted!) &GNGVGF Find Handset/ Paging the Handset 1- $#%- 1- Unavailable 7PCXCKNCDNG Low Battery .QY$CVVGT[ /'07 /'07 [27] SETTING MENU OPTIONS www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 29
    one of the global settings, you change that setting for all registered handsets. Only one handset can change global settings at a time. note Setting Day and Time Day not press a key for two minutes, the phone will return to standby. SETTING MENU OPTIONS www.uniden.com SETTING MENU OPTIONS [28]
  • Uniden UIP160P | English Owners Manual - Page 30
    SETTING MENU OPTIONS note •Call Waiting Deluxe (CWDX) may not be supported by your phone service provider. •If the area code already been stored in memory, the stored area code. $#%- &'.'6' 1- 3) Press the OK soft key. You will hear a confirmation tone. [29] SETTING MENU OPTIONS www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 31
    it in an upright position. •Do not hold the handset where you would block the signal. Correct U SI N G YO U R PHONE www.uniden.com 6CNM /76'  /'07 Incorrect •Metal and reinforced concrete may affect cordless telephone performance. •For best performance talk alternately with the caller
  • Uniden UIP160P | English Owners Manual - Page 32
    the cradle.) cradle.) To hang up Press end or return the handset to the cradle (AutoStandby). To enter a pause within When you dial the number in standby mode, press redial/p/vol/∨. the dialing sequence P appears in the display, which represents a pause. [31] USING YOUR PHONE www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 33
    on hold for 5 minutes. When 5 minutes has passed, the call is disconnected, and the phone returns to standby mode. note While a call is on hold, CIDCW can not be received. press talk/flash or on a handset. The phone will return back to the call. U SI N G YO U R PHONE www.uniden.com USING YOUR
  • Uniden UIP160P | English Owners Manual - Page 34
    Redialing a Call The last three phone numbers dialed can be quickly redialed from the handset. Redial numbers stored in the handset are independent from each other. 1) With the phone in standby mode, press redial/p/ OK soft key. The redialed number is deleted. [33] USING YOUR PHONE www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 35
    telephone handset. When the phone is ringing, press end or the MUTE soft key on the handset you want to mute. This mute will last for the current incoming call only. The ringer tone will return to the previous setting on the next incoming call. U SI N G YO U R PHONE www.uniden.com USING YOUR PHONE
  • Uniden UIP160P | English Owners Manual - Page 36
    prevents interruption from other registered handsets. This works only when the phone is in use. 1) Press the MENU soft key on the handsets during talk mode. 2) 07 Traveling Out of Range During a call, as you begin to move your handset too far from your base unit, noise may increase. If you pass the
  • Uniden UIP160P | English Owners Manual - Page 37
    mode. All registered handsets beep for 60 seconds, and Paging appears on the handset display. To cancel paging, press any key on the handset or find hs on the base. • If the battery pack is completely drained, the handset will not beep when paging. U SI N G YO U R PHONE www.uniden.com USING YOUR
  • Uniden UIP160P | English Owners Manual - Page 38
    UIP160P provides one-touch access to Packet8's voice mail service. Follow the steps below to program the Packet8 access number into any handset(s): The UIP160P's Voice Mail Tone is already configured to work with Packet8 beep. The phone returns to standby indicators. With the phone is in standby
  • Uniden UIP160P | English Owners Manual - Page 39
    just a few key presses. You can store up to 100 numbers in each registered handset. The phone uses the same memory to store phonebook entries and Caller ID messages. If the shared memory is already full, the phone will not store any more phonebook entries. You will have to delete some of the
  • Uniden UIP160P | English Owners Manual - Page 40
    in the display. 5RGGF&KCN 0Q5GNGEVP 52&'ORV[ $#%- &'.'6' 1- /QXKGU  $GGVJQXGP52& '&+6 Chain Dialing The phonebook entries in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call
  • Uniden UIP160P | English Owners Manual - Page 41
    Names and Special Characters You can use the letters on the number keys to enter special characters. Each time you press a number key, the phone cycles through the available characters for that key in the following order: Upper case letters first, lower case letters next and finally the number
  • Uniden UIP160P | English Owners Manual - Page 42
    wrong character, and then enter the correct character. To delete all characters press and hold the DELETE soft key. To continue to store the telephone number, proceed to step 5 in "Phonebook (Storing Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page 39. [ 4 1 ] PHONEBOOK (STORING
  • Uniden UIP160P | English Owners Manual - Page 43
    . 3) To finish the viewing operation, press end (or the BACK soft key or talk/flash during a call). note During a call, don't press end on the handset or the call will be disconnected. w w w . u n i d e n . c o m PHONEBOOK (STORING PHONE NUMBERS, NAMES, DISTINCTIVE RINGS AND SPEED DIAL) [ 4 2 ]
  • Uniden UIP160P | English Owners Manual - Page 44
    ). 3) Press the DIAL soft key. The number in the displayed phonebook location is dialed. 4) To hang up, press end (or return the handset to the base). Speed Dialing If you store a phone number in a speed dial memory location (10 locations: SPD1 SPD0), you can use the speed dialing feature. When the
  • Uniden UIP160P | English Owners Manual - Page 45
    0COG the EDIT soft key, and then select Edit?. Store/Edit 7 P K F G P  % Q T R 㨫 Name appears. 2) Follow the steps 3 to 7 under "Phonebook (Storing $#%- &'.'6' 1- Phone Numbers, Names, Distinctive Rings, and Speed Dial)" on page 38-39 to complete the editing operation. 3) Press the OK soft
  • Uniden UIP160P | English Owners Manual - Page 46
    Phonebook allows you to transfer stored phonebook entries from handset to handset so you don't have to manually re-enter names and numbers. You can transfer one memory (phonebook entry) at a time, or all memory entries at once. 1) When the phone is in standby mode, press . 2) Press the COPY soft
  • Uniden UIP160P | English Owners Manual - Page 47
    Dials) are common; you can store up to 100 entries for each handset. Caller ID messages are not stored when you have 100 phonebook entries. appear. •When the call is received via a telephone company that does not offer Caller ID service, the caller's phone number and name does not appear. (This
  • Uniden UIP160P | English Owners Manual - Page 48
    List You can view the Caller ID list through the handset during a call or when the phone is in standby mode. 1) With the phone in standby mode, press cid/vol/∧. With the phone in talk mode, press the MENU soft key. Use messages. [47] CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 49
    or talk/flash during a call). Deleting a Caller ID Record 1) When the phone is in standby mode, navigate to the Caller ID information to be deleted ( a confirmation tone. note •During a call, don't press end on the handset or the call will be disconnected. •Once the Caller ID data has been
  • Uniden UIP160P | English Owners Manual - Page 50
    When the phone is Standby mode 1) When the phone is in standby mode, select phone dial a "1" before the displayed Caller '&+6 ID number, press */tone/. 3) Press talk/flash or . The displayed phone
  • Uniden UIP160P | English Owners Manual - Page 51
    number will not be stored. 2) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page 38-39. note •When a long distance call store it in the phonebook. www.uniden.com CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) [50]
  • Uniden UIP160P | English Owners Manual - Page 52
    , see "Expanding Your Phone" on page 13. Using the DirectLInk Two-Way Radio Feature With the DirectLink two-way radio feature, a pair of handsets can function as twoway radios. DirectLink Mode allows two handsets to communicate with each other without the base unit or a telephone line. Use them at
  • Uniden UIP160P | English Owners Manual - Page 53
    phone is in the DirectLink standby mode, press the DirectLink soft key (example of DirectLink from handset #1). 570# *CPFUGV &KTGEV.KPM/QFG %#0%'. &KTGEV.KPM 2) Select the handset end or the END soft key on either handset. Return the handset to the cradle, or press the CANCEL
  • Uniden UIP160P | English Owners Manual - Page 54
    the OK soft key. Monitoring appears, and you hear sounds in the room where the handset is installed. 4) To turn off the Room Monitor, press the END soft key, or end. /QPKVQTKPI 㨭㨭*CPFUGV '0& If you want to prevent other handsets from monitoring this one, press the MENU soft key. Select the
  • Uniden UIP160P | English Owners Manual - Page 55
    you can answer the #059'4 page by simply picking up the handset. 4) To hang up the intercom call, press end or the END soft key on either handset. note If the party is busy or out of range, the handset returns to standby mode. MULTI-HANDSET FEATURES www.uniden.com MULTI-HANDSET FEATURES [54]
  • Uniden UIP160P | English Owners Manual - Page 56
    enabled, pressing any number key, */tone/ will answer the page. If AutoTalk is enabled, you can answer the page by simply picking up the handset. 4) To speak to the caller, press talk/flash on the receiving handset. [55] MULTI-HANDSET FEATURES www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 57
    www.packet8.net/ support. If you have questions on how to use your phone, add extra handsets, program the phonebook, etc. Contact Uniden customer service at 800-554-7331, Monday-Friday, 8 am to 5 pm, CST, or visit the Uniden website at www.uniden.com/voip for documentation, FAQs, and troubleshooting
  • Uniden UIP160P | English Owners Manual - Page 58
    Installation Troubleshooting Understanding the LED Indicators If you're having trouble with your UIP160P, the LEDs on the front panel can help identify the problem. Figure 1 shows the location of the LEDs, and Table 1 lists the states of the LEDs and what they mean. Power Status LAN Status Phone
  • Uniden UIP160P | English Owners Manual - Page 59
    downloading a firmware update or a new configuration file from Packet8, the LEDs will blink several times. Resetting the UIP160P There are two ways to reset the UIP160P: a power cycle restarts the unit, and a hard reset restores the unit to factory defaults. Power Cycle Simply unplug the telephone
  • Uniden UIP160P | English Owners Manual - Page 60
    the UIP160P's LAN port. B: Open an Internet Explorer browser window. C: In the address line of the browser, type 192.168.88.1 and press ENTER. D: Enter "admin" in the password field and press ENTER. See the User Interface Guide at www.uniden.com/voip for more information. [59] TROUBLESHOOTING www
  • Uniden UIP160P | English Owners Manual - Page 61
    of the UIP160P's IP address match you ISP's IP address and the fourth part is different 2) Making sure UIP160P's subnet mask exactly matches the subnet mask of you ISP. OR 1) Making sure the UIP160P's default gateway address is set to your ISP's IP address. www.uniden.com TROUBLESHOOTING [60]
  • Uniden UIP160P | English Owners Manual - Page 62
    verify the necessary SIP configuration settings. 1) Plugging a standard analog phone into the UIP160P's VoIP1 port. If this works, your UIP160P may be damaged. Contact Uniden customer service. For Telephone Features Symptom Suggestion The charge LED won't illuminate when the handset is placed in
  • Uniden UIP160P | English Owners Manual - Page 63
    or turn off the source of interference. • The handset was picked up before the second ring. • The call was placed through a switchboard. • Contact your service provider to verify the Caller ID settings. There can be a problem with your Caller ID service. www.uniden.com TROUBLESHOOTING [62]
  • Uniden UIP160P | English Owners Manual - Page 64
    conference feature. • Make sure that another handset is not in privacy mode. Room Monitor feature does not work. • Make sure to place the handset(s) within the range of the base. If you still have a problem. • Call our customer hotline at 1-800-297-1023. [63] TROUBLESHOOTING www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 65
    and Uniden adapter model specifically designated for this product. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. Caution • Use only the specified Uniden battery pack (BT-446). • Do not remove the batteries from the handset to
  • Uniden UIP160P | English Owners Manual - Page 66
    after each telephone call. Battery Life With average use, the battery should give you about 5 hours of talk time and 7 days of standby time. For optimum performance, return the handset to the cradle when it is not in use. Low battery alert When the battery pack is very low, the phone is programmed
  • Uniden UIP160P | English Owners Manual - Page 67
    your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year. A replacement Uniden adapter or battery can
  • Uniden UIP160P | English Owners Manual - Page 68
    battery packs to avoid charge interruption. CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service
  • Uniden UIP160P | English Owners Manual - Page 69
    battery as specified in the owner's manual. Using another charger may damage the battery or cause the battery to explode. Important Safety Instructions When using your telephone manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this
  • Uniden UIP160P | English Owners Manual - Page 70
    device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone". [69] I.C. NOTICE www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 71
    Area Code 29 AutoTalk 22 B Banner 23 Battery Preparing 12 Replacement and handling. . . . handset 15 DirectLink 51 www.uniden.com Distinctive ringer 22 E Earpiece volume 34 Expanding your phone 13 G General information 66 Global Setup 28 H Hands-free conversation 30 Headset installation
  • Uniden UIP160P | English Owners Manual - Page 72
    /CKN 4KPIGT8QNWOG ∧ 4KPIGT6QPGU &KUVKPEVKXG4KPI or #WVQ6CNM #P[MG[#PUYGT ∨ $CPPGT .CPIWCIG .%&%QPVTCUV -G[6QWEJ6QPG #PKOCVKQP5ETGGP 4 Q Q O  / Q$P#%K-V Q T $#%- 1- [71] MAIN MENU FLOW CHART www.uniden.com
  • Uniden UIP160P | English Owners Manual - Page 73
    672 or &C[6KOG %+&%9 ∨ #TGC%QFG &KCN/QFG 8QKEG/CKN6QPG $#%- $#%- 1- ∨ *CPFUGV5GVWR )NQDCN5GVWR >GIKUVGT*5 $#%- $#%- 1- OK ∧ >GIKUVGT*5! or ;GU 0Q $#%- $#%- 1- ∨ OK >GIKUVTCVKQP %QORNGVG $#%- $#%- 1- www.uniden.com MAIN MENU FLOW CHART [72]
  • Uniden UIP160P | English Owners Manual - Page 74
    have trouble connecting to your VoIP Service or have questions about your VoIP service features Contact Packet8 customer service at 1-888-898-8733 or visit www.packet8.net/support. If you have questions on how to use your phone, add extra handsets, program the phonebook, etc. Contact Uniden customer
  • Uniden UIP160P | English Owners Manual - Page 75
  • Uniden UIP160P | English Owners Manual - Page 76
    ACGCFOEOSWROS.ONURLNIINIEDSEE, [email protected] W W R E G I S T E R O N L I N E T O D AY ! T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T. ©2005 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China. UPZZ01790HZ(0)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
UIP 160P
SERIES
OWNER'S
MANUAL