Uniden UM380 English Owners Manual - Page 12

Message, Meaning - radio manual

Get Uniden UM380 PDF manuals and user guides
UPC - 050633501412
View all Uniden UM380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Message Input Position Meaning The radio does not have valid GPS data. (see Setting the GPS position manually on page 16). Battery Low The battery voltage output is too low (below 10.5 VDC). Battery High The battery voltage output is too high (above 16.0 VDC). Using the radio in normal mode xx To transmit, press and hold PUSH TO TALK on the microphone. Release the button when you are finished talking. xx For the best sound quality, hold the microphone about two inches from your mouth while you're talking. xx Press CHANNEL UP on the radio or the microphone to move up one channel at a time. Press and hold either button to scroll quickly up the channels. xx Press CHANNEL DOWN on the radio or the microphone to move down one channel at a time. Press and hold either button to scroll quickly down the channels. xx To change the transmit power, press and hold the ENT-1W/25W for two seconds. The transmit power switches between 1 watt and 25 watts each time you press and hold ENT- 1W/25W. Normal mode with Weather Alert Watch If you activate Weather Alert Watch while operating in normal mode, the radio checks the most recently-used weather channel every seven seconds. If it detects a weather alert for your area, it will change the channel to the last-used weather channel. The radio will not check the weather channel while you are actively transmitting; it waits until your transmission is finished and then checks the weather channel. To turn Weather Alert Watch on or off, press and hold CALL-MENU while Monitoring Channel 25 the radio is idle. Select Setup and then WX Alert Mode. Use CHANNEL UP and CHANNEL DOWN to choose WX Alert Mode setting ON or Off. Normal mode with Triple and Dual Watch If you activate Triple Watch while operating in normal mode, the radio checks channels 16 and 9 every two seconds; with Dual Watch turned on, the radio only checks channel 16. The radio will not check channels 16 or 9 while you are actively transmitting; it waits until your transmission is finished and wx Every 7 seconds, the radio checks the most recently-used weather channel. with WX Alert on then checks the channels. 8 English UM380_20101221.indd 8 4/13/2011 11:25:08 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
8
English
Message
Meaning
Input Position
The radio does not have valid GPS data. (see Setting the GPS
position manually on page 16).
Battery Low
The battery voltage output is too low (below 10.5 VDC).
Battery High
The battery voltage output is too high (above 16.0 VDC).
Using the radio in normal mode
x
To transmit, press and hold
PUSH TO TALK
on the microphone. Release the button when
you are finished talking.
x
For the best sound quality, hold the microphone about two inches from your mouth while
you’re talking.
x
Press
CHANNEL UP
on the radio or the microphone to move up one channel at a time. Press
and hold either button to scroll quickly up the channels.
x
Press
CHANNEL DOWN
on the radio or the microphone to move down one channel at a time.
Press and hold either button to scroll quickly down the channels.
x
To change the transmit power, press and hold the
ENT-1W/25W
for two seconds. The
transmit power switches between 1 watt and 25 watts each time you press and hold
ENT-
1W/25W.
Normal mode with Weather Alert Watch
If you activate Weather Alert Watch while operating in normal mode, the radio checks the
most recently-used weather channel every seven seconds. If it detects a weather alert for
your area, it will change the channel to the last-used weather channel. The radio will not
check the weather channel while you are actively transmitting; it waits until your
transmission is finished and then checks the weather channel.
To turn Weather Alert Watch on or
off, press and hold
CALL-MENU
while
the radio is idle. Select
Setup
and then
WX Alert Mode
. Use
CHANNEL UP
and
CHANNEL DOWN
to choose
WX Alert
Mode
setting
ON
or
OFF
.
Normal mode with Triple and Dual Watch
If you activate Triple Watch while operating in normal mode,
the radio checks channels 16 and 9 every two seconds; with
Dual Watch turned on, the radio only checks channel 16. The
radio will not check channels 16 or 9 while you are actively
transmitting; it waits until your transmission is finished and
then checks the channels.
wx
Every 7 seconds,
the radio checks the
most recently-used
weather channel.
with WX Alert on
Monitoring Channel 25
UM380_20101221.indd
8
4/13/2011
11:25:08 AM