Uniden UM380 English Owners Manual - Page 18

Choosing Triple Watch or Dual Watch

Get Uniden UM380 PDF manuals and user guides
UPC - 050633501412
View all Uniden UM380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

xx To prevent stuck microphone problems or situations where PUSH TO TALK is pushed accidentally, the radio limits your talk time to 5 minutes in a single transmission. If you talk for over 5 minutes continuously, the display shows RELEASE MIC BUTTON. xx For the best sound quality, hold the microphone about two inches away from your mouth. xx You cannot transmit while the radio is in weather mode or scan mode. xx See the channel lists beginning on page 37 for a list of receive-only channels. Boosting the transmission power In most situations, the 1 Watt transmission power is all you need. If you find yourself far away from other stations and have trouble getting a response, you may need to boost the transmission power from 1 Watt to 25 Watts: 1. Select the channel you want to transmit on. 2. Push and hold ENT-1W/25W for two seconds. The display shows 25 Watts in the upper left hand corner. 3. The transmit power remains at 25 Watts until you change the setting back. Push and hold ENT-1W/25W for two seconds. The display shows 1 Watt. ##NOTE: Don't forget to change the transmission setting back to 1 Watt when you move closer to other stations. ##NOTE: By default, when you change to channel 16, the radio automatically boosts the power to 25 Watts. Be sure to change the power back to 1 Watt if you are not making an emergency transmission. Some channels (for example, channels 13 and 67) limit the power of transmission to 1 Watt so that there is less interference between boaters attempting to use the channel at the same time. If you switch to one of these channels, the radio changes back to 1 Watt automatically. See the channel lists beginning on page 37 for a list of power-restricted channels. Choosing Triple Watch or Dual Watch In Triple Watch mode, the radio briefly checks channels 16 and 9 every two seconds. In Dual Watch mode, the radio checks channel 16 only. Generally, Triple Watch is used in areas where channel 9 is used as a hailing frequency while Dual Watch is used in areas where channel 16 is used for distress and hailing. Your radio comes set to use Triple Watch; if you want to use Dual Watch instead, you will have to select it in the setup: Press and hold - Setup Dual/TriWatch 88 Dual/TriWatch Dual Watch A Triple Watch [Exit] Back[CLR] Select[ENT] 1. Press and hold CALL MENU to display the normal menu. 2. Select Setup and then Dual/Tri Watch. 14 English UM380_20101221.indd 14 4/13/2011 11:25:10 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
14
English
x
To prevent stuck microphone problems or situations where
PUSH TO TALK
is pushed
accidentally, the radio limits your talk time to 5 minutes in a single transmission. If you
talk for over 5 minutes continuously, the display shows
RELEASE MIC BUTTON
.
x
For the best sound quality, hold the microphone about two inches away from your mouth.
x
You cannot transmit while the radio is in weather mode or scan mode.
x
See the channel lists beginning on page 37 for a list of receive-only channels.
Boos°ng the transmission power
In most situations, the 1 Watt transmission power is all you need. If you find yourself far
away from other stations and have trouble getting a response, you may need to boost the
transmission power from 1 Watt to 25 Watts:
1.
Select the channel you want to transmit on.
2. Push and hold
ENT-1W/25W
for two seconds. The display shows 25 Watts in the upper left
hand corner.
3.
The transmit power remains at 25 Watts until you change the setting back. Push and
hold
ENT-1W/25W
for two seconds. The display shows 1 Watt.
#
NOTE: Don’t forget to change the transmission setting back to 1 Watt when you move closer
to other stations.
#
NOTE: By default, when you change to channel 16, the radio automatically boosts the
power to 25 Watts. Be sure to change the power back to 1 Watt if you are not making an
emergency transmission.
Some channels (for example, channels 13 and 67) limit the power of transmission to 1 Watt
so that there is less interference between boaters attempting to use the channel at the same
time. If you switch to one of these channels, the radio changes back to 1 Watt automatically.
See the channel lists beginning on page 37 for a list of power-restricted channels.
Choosing Triple Watch or Dual Watch
In Triple Watch mode, the radio briefly checks channels 16 and 9 every two seconds. In Dual
Watch mode, the radio checks channel 16 only. Generally, Triple Watch is used in areas
where channel 9 is used as a hailing frequency while Dual Watch is used in areas where
channel 16 is used for distress and hailing. Your radio comes set to use Triple Watch; if you
want to use Dual Watch instead, you will have to select it in the setup:
1. Press and hold
CALL MENU
to display the normal menu.
2. Select
Setup
and then
Dual/Tri Watch
.
Dual/TriWatch
88
A
Dual Watch
Triple Watch
[Exit]
Dual/TriWatch
Setup
Press and hold -
Back[CLR]
Select[ENT]
UM380_20101221.indd
14
4/13/2011
11:25:10 AM