Uniden UM380 English Owners Manual - Page 36

Manufacturer, Model Numbers, GPS NMEA0183, OUTPUT Wire Color, Connect to GREEN, WIRE on your radio,

Page 36 highlights

GPS Manufacturer Northstar RayMarine RayMarine RayMarine Simrad Sitex Standard GPS NMEA0183 Model Number(s) OUTPUT Wire Color (Connect to GREEN WIRE on your radio) All Models Yellow 420 Yellow 520 / 620 Blue RL Series White All Models White Neptune, Nautilus Gray CP150 / CP150C Green Ground Wire Color (connect to BARE WIRE on your radio) Black Brown Brown Brown Brown Brown Yellow 3. Be certain all wire connections are secure and that all open wires are adequately covered. ##NOTE: To extend the life of the radio, use waterproof tape to seal electrical connections. GPS Verification If the GPS receiver is correctly connected and it transmits valid data, the display shows GPS Data OK. Press ENT-1W25W to open the GPS status screen and see detailed GPS data: Date Course Latitude Longitude Status Time 16 06/20 11:00:00 208o 30. 0 KT 35o 40. 610 N 139o 46. 564 E GPS Data: External Current channel Speed If the GPS does not send coordinates within 30 minutes, an audible alert sounds once and the display shows Input Position. This message remains until the coordinates are updated. After 4 hours, the audible alert sounds again if no coordinates are received and the GPS is connected. After 23.5 hours, the radio deleted the current coordinates and displays Input Position. See page 16 to manually set the GPS coordinates. Configuring the GPS If the radio is receiving valid GPS data, it will automatically set the clock to your local time based on the GPS location. You can adjust your local time forward or back one hour if necessary (for example, if you are close to the border of a time zone); you can also adjust for Daylight Savings Time. 32 English UM380_20101221.indd 32 4/13/2011 11:25:18 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

32
English
GPS
Manufacturer
Model Number(s)
GPS NMEA0183
OUTPUT Wire Color
(Connect to GREEN
WIRE on your radio)
Ground Wire Color
(connect to BARE
WIRE on your radio)
Northstar
All Models
Yellow
Black
RayMarine
420
Yellow
Brown
RayMarine
520 / 620
Blue
Brown
RayMarine
RL Series
White
Brown
Simrad
All Models
White
Brown
Sitex
Neptune,
Nautilus
Gray
Brown
Standard
CP150 / CP150C
Green
Yellow
3.
Be certain all wire connections are secure and that all open wires are adequately
covered.
#
NOTE: To extend the life of the radio, use waterproof tape to seal electrical connections.
GPS Verifica°on
If the GPS receiver is correctly connected and it transmits valid data, the display shows
GPS
Data OK
. Press
ENT-1W25W
to open the GPS status screen and see detailed GPS data:
If the GPS does not send coordinates within 30 minutes, an audible alert sounds once and the
display shows
Input Position
. This message remains until the coordinates are updated.
After 4 hours, the audible alert sounds again if no coordinates are received and the GPS is
connected. After 23.5 hours, the radio deleted the current coordinates and displays
Input
Position
.
See page 16 to manually set the GPS coordinates.
Configuring the GPS
If the radio is receiving valid GPS data, it will automatically set the clock to your local time
based on the GPS location. You can adjust your local time forward or back one hour if
necessary (for example, if you are close to the border of a time zone); you can also adjust for
Daylight Savings Time.
16
06/20
11:00:00
208
o
30. 0 KT
35
o
40. 610 N
139
o
46. 564 E
GPS Data: External
Date
Time
Current
channel
Course
Latitude
Longitude
Speed
Status
UM380_20101221.indd
32
4/13/2011
11:25:18 AM