ViewSonic PG701WU Lamp Swapping Instruction
ViewSonic PG701WU Manual
View all ViewSonic PG701WU manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PG701WU manual content summary:
- ViewSonic PG701WU | Lamp Swapping Instruction - Page 1
PX701HD/PG701WU PG706HD/PG706WU Lamp Swapping Instruction - ViewSonic PG701WU | Lamp Swapping Instruction - Page 2
careful of sharpedges in the lamp compartment. Wash hands after lamp replacement. yy Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire. yy Wear working gloves during lamp replacement. yy Unplug projector power at least 10 minutes - ViewSonic PG701WU | Lamp Swapping Instruction - Page 3
in locations where water might splash on it, children can reach it, or near flammable materials. yy Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As show in - ViewSonic PG701WU | Lamp Swapping Instruction - Page 4
connection, which could result in malfunction. 11-1 yy Do not over tighten the screw. 11-2 Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp Hours and press Enter. The notification message will be displayed if you want to reset the - ViewSonic PG701WU | Lamp Swapping Instruction - Page 5
PX701HD/PG701WU
PG706HD/PG706WU
Lamp Swapping Instruction