ViewSonic PG706HD Lamp Swapping Instruction

ViewSonic PG706HD Manual

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PG706HD | Lamp Swapping Instruction - Page 1
PX701HD/PG701WU PG706HD/PG706WU Lamp Swapping Instruction
ViewSonic PG706HD | Lamp Swapping Instruction - Page 2
careful of sharpedges in the lamp compartment. Wash hands after lamp replacement. yy Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire. yy Wear working gloves during lamp replacement. yy Unplug projector power at least 10 minutes
ViewSonic PG706HD | Lamp Swapping Instruction - Page 3
in locations where water might splash on it, children can reach it, or near flammable materials. yy Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As show in
ViewSonic PG706HD | Lamp Swapping Instruction - Page 4
connection, which could result in malfunction. 11-1 yy Do not over tighten the screw. 11-2 Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp Hours and press Enter. The notification message will be displayed if you want to reset the
ViewSonic PG706HD | Lamp Swapping Instruction - Page 5

Match case Limit results 1 per page

PX701HD/PG701WU

PG706HD/PG706WU

Lamp Swapping Instruction