ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K
ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom Manual
 |
View all ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom manual content summary:
- ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 1
PX701HD/PG701WU PG706HD/PG706WU Lamp Swapping Instruction - ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 2
careful of sharpedges in the lamp compartment. Wash hands after lamp replacement. yy Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire. yy Wear working gloves during lamp replacement. yy Unplug projector power at least 10 minutes - ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 3
in locations where water might splash on it, children can reach it, or near flammable materials. yy Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As show in - ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 4
connection, which could result in malfunction. 11-1 yy Do not over tighten the screw. 11-2 Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp Hours and press Enter. The notification message will be displayed if you want to reset the - ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 5
-
1 -
2 -
3 -
4 -
5
 |
 |
PX701HD/PG701WU
PG706HD/PG706WU
Lamp Swapping Instruction