ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom

ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom and Low Input Lag Manual

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 1
PA500S/PA503S/PA503X/ PA503W/PA503SP/PA503XP/ PG603X/PG603W/PG703X/ PG703W/PG707X/PG707W Lamp Swapping Instruction
ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 2
Replacing the lamp Turn the power off and disconnect the projector from the power outlet. y To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp. y To reduce the risk of severe burns, allow the projector to cool for at least 45
ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 3
7. Use the handle to slowly pull the lamp out of the projector. CAUTION y Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. y Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. y Do not
ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 4
11. Tighten the screws that secure the lamp cover. CAUTION y Loosen screw may cause a bad connection, which could result in malfunction. y Do not over tighten the screw. 11-1 11-2 Replacing the lamp After powering on the projector, open the OSD menu. Go to ADVANCED > Lamp Settings > Reset Lamp
ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 5

Match case Limit results 1 per page

PA500S/PA503S/PA503X/

PA503W/PA503SP/PA503XP/

PG603X/PG603W/PG703X/

PG703W/PG707X/PG707W

Lamp Swapping Instruction