ViewSonic PJ1158 PJ1158-1 User Guide, English

ViewSonic PJ1158 - XGA LCD Projector Manual

ViewSonic PJ1158 manual content summary:

  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 1
    ViewSonic® PJ1158 LCD Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas Model No. : VS11459
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 2
    and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of local law. ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 3
    guide for further instructions. 7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer's instructions an electrician for replacement of the outlet long periods of time. 14. Refer all servicing to qualified service personnel. Service ViewSonic PJ1158 ii
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 4
    : Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic PJ1158 iii
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 5
    interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this Purchase Date: PJ1158 ViewSonic LCD Projector VS11459 PJ1158-1_UG_ENG Rev. 1B 09-07-06 Personal Identification Number (PIN): The lamp in this
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 6
    Projector PJ1158 User's Manual - Operating Guide Contents of package (1) Projector (2) Remote control with two AA batteries (3) Power cord (4) RGB cable (5) Audio/Video cable (6) Quick Start Guide and ViewSonic Wizard CD (7) Lens cover, Rivet and Strap (1) VIDEO RGB SEARCH ASPECT
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 7
    93 Lamp 93 Air filter 95 Internal clock battery 97 Other care 98 Troubleshooting 99 Related messages 99 Regarding the indicator lamps 100 Phenomena that may be easy to be mistaken for machine defects. . . . 102 Warranty and after-service 105 Specifications 105 ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 8
    the lens cover, please fasten the lens cover to the projector using the included strap. 1. Fix the strap to the strap hole of the lens cover. Strap hole 2. Put one side of the strap into the groove on the rivet. 3. Push the rivet into the rivet hole. Bottom Rivet hole ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 9
    the projector may drop down. CAUTION ►Maintain normal ventilation to prevent the projector from heating up. Do not cover, block or plug up the vents. Do not place anything that can stick or be sucked to the vents, around the intake vents. Clean the air filter periodically. ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 10
    LAMP OUT port (19) REMOTE CONTROL port (20) LAN projector from falling down, since it is not designed for it. ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the projector without cooling it down. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 11
    MUTE SEARCH (27) (21) (23) (29) (24) (10) (18) (5) (6) (9) (19) Back of the remote control WARNING ►Do not look into the beam outlet and point the beam at people and pets while pressing the LASER button, since Use the laser point- er only for pointing on the screen. (31) ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 12
    . Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 13
    lens shift is set full upward On a horizontal surface (b) (a) (c) up (c) down Suspended from the ceiling (c) up (a) (c) down (b) • Keep a space of 30 cm or more between the sides of the projector (424) 13.0 (510) 53 (21) 480 (189) 11.7 (462) 14.1 (556) -15 (-6) 450 (177) ViewSonic PJ1158 
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 14
    the projector from falling down, since it is not designed for it. NOTE • The security bar and the security slot are not compreRhOGeUBTnsive theft preRvGeBn1tion measureRsG.BT2hey are intenMd1e-Dd toVbIDeEOused asY supplementCaBl/PtBheft prevention measure. Security slot ViewSonic PJ1158 CR
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 15
    specific length or equipped with a core. For cables with a core only at one end, connect the end with the core to the projector. ►Make sure that devices are connected to the correct ports. An incorrect connection may result in malfunction or damage to the device and the projector. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 16
    projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual drivers in your computer as this projector is a Plug-and-Play monitor. ViewSonic PJ1158 11
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 17
    of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 18
    a battery in a fire or water. Keep batteries in a dark, cool and dry place. • If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the flower adheres your body or clothes, rinse well with water immediately. ViewSonic PJ1158 13
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 19
    the same mode as the remote control. To set the mode of the remote control, slide the knob of the frequency switch inside the battery cover into the position indicated by the mode number to choose. Back of the remote control Inside of the battery cover 2 1 Frequency switch ViewSonic PJ1158 14
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 20
    PC's move pointer on the screen AUDIOIN2 in the direction. CR/PR (2) Mouse right button REMOTE Pressing the button works instead of clicking the S-VIDEO R AUDIO IN L 3 R L AUDIO operation. - This function is activated only when the projector is working properly. ViewSonic PJ1158 15
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 21
    the projector or the remote control again while the message appears. The projector lamp will projector prior to the connected devices. Power off the projector later than the connected devices. • Use the shutdown switch only when the projector is not turned off by normal procedure. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 22
    the MUTE button on the remote control. A dialog will a few seconds. ● As long as no audio input is projector will check the RGB 1 port first. If no input is detected at the port, the projector will check other port in above order. ASPECT (continued on next page) PUSH ENTER ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 23
    PUSH ENTER AUTO Searching an input signal 1. Press the SEARCH button on the remote control. The projector will start to check its input ports in order to MAGNIFY PAGEOUNP EOSFCF FREEZE the signal. ● Performing the automatic adjustment initializes the aspect ratio setting. ViewSonic PJ1158 18
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 24
    When the vertical lens shift 1/10 is adjusted, it is recommended to shift the picture upward. LEFT BLANK RIGHT LASER Using the automatic adjustment feature 1. Press the AUTO button on the remote control. ASPECT PUSH note that it may not function correctly with some input. ViewSonic PJ1158 19
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 25
    the remote Manual menu, if the projector screen is inclined lens type FL-601 only), this function may not work well. ● When the horizontal lens shift is not set to the center, this function may not work well. ● This function will be unavailable when Transition Detector is on. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 26
    Freezing the screen 1. Press the FREEZE button on the remote control. The "FREEZE" indication will appear on the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 27
    screen, press the BLANK button again. ● The projector automatically returns to the input signal screen wheAnSPECoT ne of the projector's buttons or the remote control buttons is pressed or one of PUSHENTER the MY BUTTON VOLUME ON 1 MUTE OFF 2 FREEZE KEYSTONE SEARCH ViewSonic PJ1158 22
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 28
    to select an item to operate. Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear. 4. input port is selected, or when a certain input signal is displayed. ViewSonic PJ1158 23
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 29
    the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. '#5;/'07=4)$? #52'%6 #-7'6;156-1'0;'5610 extra such as a line may appear. (continued on next page) ViewSonic PJ1158 24
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 30
    MIRROR item in SETUP menu. Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the RESET using the ▲ button the menu of PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION or NETWORK. ViewSonic PJ1158 25
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 31
    the +0276 5'672 7.6 %1.146'/2/+& projector or remote control, and press the ► cursor button #7&+1 5%4''0 %1.14 6+06 on the projector or remote control, or the ENTER button 126+10 , lines or other distortion may appear. (continued on next page) ViewSonic PJ1158 26
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 32
    may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. (continued on next page) ViewSonic PJ1158 27
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 33
    occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of data into the memory linked in the number included in the function's name. • Remember that the current data being stored of a memory will be lost by saving a new data into the memory. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 34
    an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according the OVER SCAN is set to 10. (continued on next page) ViewSonic PJ1158 29
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 35
    . In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature. For an RGB signal seconds. Also please note that it may not function correctly with some input. ViewSonic PJ1158 30
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 36
    item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it to select a suitable mode except AUTO. (continued on next page) ViewSonic PJ1158 31
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 37
    is required for a SCART RGB input to the projector. For details, contact your dealer. RGB OUT RGB1 RGB2 M1-D AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL CO weak, try finding a more suitable mode. (continued on next page) ViewSonic PJ1158 32
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 38
    the signal connector so that no signal is received and turn the SYNC ON G mode off, and then reconnect the signal. (continued on next page) ViewSonic PJ1158 33
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 39
    ) Item RESOLUTION Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. ous resolution. • For some pictures, this function may not work well. ViewSonic PJ1158 34
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 40
    this function will vary among inputs. For some input, this function may not work well. • When the horizontal lens shift is not set to the center, this function may not work well. • This function will be unavailable when the Transition Detector is on. (continued on next page) ViewSonic PJ1158 35
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 41
    status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm will be displayed when projector is restarted after the power switch is turned off. ViewSonic PJ1158 36
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 42
    the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control low frequency limitations of the drivers. Adjust it depending on the user's preference. Using the ▲/▼ buttons turns the speaker function on ViewSonic PJ1158 37
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 43
    item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it plain black screen after several minutes. (continued on next page) ViewSonic PJ1158 38
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 44
    TURN ON is selected to the MyScreen PASSWARD of SECURITY item in OPTION menu, the START UP is fixed to MyScreen. (continued on next page) ViewSonic PJ1158 39
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 45
    screen. Please wait for the target image to be displayed, and press the ENTER button on the remote control when the image is dis- played. The image will freeze and the frame for capturing will MyScreen PASSWARD of SECURITY item in OPTION menu. (continued on next page) ViewSonic PJ1158 40
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 46
    if the picture is freezing. Do not mistake freezing for a malfunction. Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select ESC or ◄ button and '5% 37+6 '06'40':6 the INPUT button simultaneously. ViewSonic PJ1158 41
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 47
    has been supplied to the projector while the lamp is off. • After turning the lamp on by the AUTO ON function, if neither input nor operation is detected for about 30 minutes, the projector is turned off, even though the AUTO OFF function is disabled. (continued on next page) ViewSonic PJ1158 42
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 48
    about the lamp. • For the lamp replacement, see the section "Lamp". The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 49
     AUTO ADJUST  GHOST  FILTER MESSAGE  LENS TYPE  KEY LOCK SERVICE FACTORY RESET  INFORMATION  REMOTE FREQ.  REMOTE RECEIV. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 50
    lens (Type FL-601) 3: for a short throw lens (Type SL-602) 4: for a long throw lens (Type LL-603) 5: for an ultra long throw lens (Type UL-604) • This setting has an influence on the keystone distortion etc. • About the optional lens, ask you dealer. (continued on next page) ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 51
    㪜'㪥06㪫'㪜4㪩 4'/16'4'%'+8 (4106 612 4'#4 REMOTE FREQ. Use the ▲/▼ button to change the Projector's remote sensor setting. 1:NORMAL ó 2:HIGH Items with items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset. RESET ï CANCEL (continued on next page) ViewSonic PJ1158 46
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 52
    button on the projector will close the NOTE NEW PASSWORD BOX. • Please do not forget your PASSWORD. 5'%74+6; 0'92#55914&#)#+0  %#0%'. 1- NEW PASSWORD AGAIN BOX 5'%74+6; 016'0'92#55914&  '06'4 ':+6 NOTE NEW PASSWORD BOX (continued on next page) ViewSonic PJ1158 47
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 53
    the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The ViewSonic with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user  37+6 0':6 CHECK PASSWORD BOX ViewSonic PJ1158 48
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 54
    remote control or INPUT button on the projector ViewSonic with the 10 digit Inquiring Code. Your PASSWORD will be sent after 37+6 0':6 ENTER PASSWORD BOX (large) your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 55
    Inquiring Code is displayed the projector will turn off. 2+0$1: +PSWKTKPI%QFG Inquiring Code (PIN Code) 3.3-2 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) ViewSonic PJ1158 50
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 56
    long remote control or the INPUT button on the projector will return to the CHECK PASSWORD BOX 64#05+6+10&'6'%614 %1/2.'6'  '06'4 ':+6 PASSWORD BOX Transition Detector on/off menu. • Please do not forget your Transition Detector PASSWORD. (continued on next page) ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 57
    be displayed inside the BOX. 4.4-3 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 64#05+6+10&'6'%614 '06'42#55914& +PSWKTKPI%QFG  37+6 0':6 ENTER PASSWORD BOX (large) ViewSonic PJ1158 52
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 58
    on your network. Incorrect network settings on this projector may cause trouble on the network. 2+%674' +/#)' +0276 remote control, and press the ► cursor button on the projector or '#5;/'07 5'48+%' remote control, or ENTER button on the remote (continued on next page) ViewSonic PJ1158 53
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 59
    the image use the ESC button on the remote control or push the ◄ and INPUT buttons on the projector at the same time. • Items with no image stored cannot be selected. • Images can be changed using the ▲/▼ buttons while the image data downloads. (continued on next page) ViewSonic PJ1158 54
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 60
    ► button. 5'48+%' 4'56#46 Then use the ▲ button to execute. SERVICE 4'56#46 ':'%76' %#0%'. Network will be once cut off when choose restart. If DHCP is selected on, IP address may be changed. After selecting RESTART, Network menu may not be controlled approx. 20 seconds. ViewSonic PJ1158 55
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 61
    to perform various functions according to the DATE and TIME. Still Image Transfer The projector can display still images that are transferred via the network. Projector Control via RS-232C via the Network The projector can be controlled using RS-232C commands over a network. ViewSonic PJ1158 56
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 62
    appropriate SUBNETMASK for the projector to connect to your network. 4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that forwards traffic to a destination outside of the subnet of the transmitting device) address for the projector to connect to your network. ViewSonic PJ1158 57
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 63
    use the projector web pages properly. See the Service Pack 2 install security update Q832894 (MS04-004) or the web browser interface may not be displayed correctly. And when using an older version of Internet Explorer, during operations the browser will log out after 50 seconds. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 64
    the projector's network connection. Administrator ID User ID √ N/A N/A N/A N/A N/A N/A N/A √ √ N/A Below are the factory default settings for administrator IDs, user IDs and passwords. Item Administrator ID User ID ID Administrator User Password ViewSonic PJ1158 59
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 65
    for configuring or controlling the projector via a web browser. Example: If the IP address of the projector isFisge. t1to 192.168.1.10 user ID) 3) Click the desired operation or configuration item on the main menu located on the left-hand side of the screen (Fig. 2 or Fig. 3). ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 66
    manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector This information is only displayed when logged on using an administrator ID. ViewSonic PJ1158 61
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 67
    changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. ViewSonic PJ1158 62
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 68
    network connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.dresses. ViewSonic PJ1158 63
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 69
    ] button to save the settings. NOTE • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. ViewSonic PJ1158 64
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 70
    to 255 alphanumeric characters. Configures the text of the e- mail to be sent. The length of the text can be up to 1024 alphanumeric characters. ViewSonic PJ1158 65
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 71
    Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Lamp Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the [ of the e-mail to be sent. The length of the text can be up to 1024 alphanumeric characters. ViewSonic PJ1158 66
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 72
    Mail Mail Subject Mail Text Description Configures Lamp Time Error alert settings. Click the [ text can be up to 1024 alphanumeric characters. Filter Error SNMP Trap Send Mail Mail Subject Mail Text Configures Filter Error alert settings. Click the [Enable] check box . ViewSonic PJ1158 67
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 73
    text can be up to 1024 alphanumeric characters. Lamp Time Alarm Alarm Time SNMP Trap Send Mail Mail Subject Mail Text Configures Lamp Time Alarm alert settings. Configures the lamp time to alert. Click the [Enable] check of the text can be up to 1024 alphanumeric characters. ViewSonic PJ1158 68
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 74
    . Alarm Time SNMP Trap Configures the filter time to alert. Click the [Enable can be up to 1024 alphanumeric characters. Configures alert settings for when "CHANGE THE LAMP" is displayed. Click the [Enable] check box to enable SNMP Trap alerts for this to save the settings. ViewSonic PJ1158 69
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 75
    Friday scheduling. Displays the current Friday schedule. Configures the Saturday schedule. Click the [Enable] check box to enable Saturday scheduling. Displays the current Saturday schedule. ViewSonic PJ1158 70
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 76
    Schedule Month/Day Schedule List Configures the specific date (No.5) schedule. Click the [Enable] check box to enable specific date (No.5) scheduling. Set the Month and date. Displays the current specific date (No.5) schedule. Click the [Apply] button to save the settings. ViewSonic PJ1158 71
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 77
    the parameters for input switching. Display Image Parameter Configures the parameters for display of transfer image data. Click the [Register] button to add new commands to the Schedule List. Click the /Day format. Configures the current time in Hour:Minute:Second format. ViewSonic PJ1158 72
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 78
    function, the time difference must be set. • The projector will retrieve DATE and TIME information from the Timeserver and override time settings when SNTP is enabled. • The Internal Clock's time may not remain accurate. Using SNTP is recommended to maintain accurate time. ViewSonic PJ1158 73
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 79
    Configures the User ID and Password. Configures the User ID. The length of the text can be up to 32 alphanumeric characters. Configures the User Password. The length of the text can be up to 255 alphanumeric characters. Used to re-enter the above password for verification. ViewSonic PJ1158 74
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 80
    . The network connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu. ViewSonic PJ1158 75
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 81
    of the items have a submenu. Refer to the table below for details. Controls the projector. Main Item Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Picture Brightness Selects the Active Iris setting. Recalls the MyMemory data. Saves the MyMemory data. ViewSonic PJ1158 76
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 82
    Projector Control Projector Control (Continued) Image Item Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Description Selects the the Horizontal Keystone setting. Whisper Selects the Fan speed. (Normal or Whisper) Mirror Selects the Mirror status. ViewSonic PJ1158 77
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 83
    for the MY BUTTON2 buttons on the included remote control. Enables/Disables Auto Adjustment. Enable/Disable Remote Receiv. Front. Enable/Disable Remote Receiv. Rear. Enable/Disable Remote Receiv. Top. Enable/Disable Remote Freq. Normal. Enable/Disable Remote Freq. High. ViewSonic PJ1158 78
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 84
    Restarts the projector's network connection in order to activate new configuration settings. NOTE • Restarting requires you to re-log on in order to further control or configure the projector via a web browser. Logoff When logoff is clicked, the logon screen is displayed. ViewSonic PJ1158 79
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 85
    settings are correct. The following mail will be delivered to the speci- fied addresses. Subject line : Test Mail Text : Send Test Mail Date Time IP Address MAC Address ViewSonic PJ1158 80
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 86
    button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address ViewSonic PJ1158 81
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 87
    by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP settings Configure the following items via a web browser to use SNMP. Example: If not required. 9) Click the [Apply] button to save the settings. ViewSonic PJ1158 82
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 88
    events. Priority is given to those with the lower numbers when more than one event has been scheduled for the same date and time (e.g., 'Specific day No. 1' has priority over 'Specific day No. 2' and so on. • Be sure to set the date and time before enabling scheduled events. ViewSonic PJ1158 83
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 89
    ] item in [Configuring and Controlling the Projector via a Web Browser] for further information Replace the battery by following the instructions on replacing the battery. • The Internal Clock's time may not remain accurate. Using SNTP is recommended to maintain accurate time. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 90
    projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not work when the power switch is turned off, [¡] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 91
    Configure the following items from a web browser when e-SHOT is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser clear the check box. 5) Click the [Apply] button to save the settings. ViewSonic PJ1158 86
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 92
    Restart] on the main menu. e-SHOT (Still Image Transfer) Transmission e-SHOT transmission requires an exclusive application for your PC. You can download it from the ViewSonic web site. Refer to the manual for the application for instructions. ViewSonic PJ1158 87
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 93
    the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the otherwise clear the check box. 6) Click the [Apply] button to save the settings. ViewSonic PJ1158 88
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 94
    restarting the network. Restart the network when any configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu. ViewSonic PJ1158 89
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 95
    communication ports. TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However, the following reply will be sent back → Random value from 0 to 255 (This value is attached to the reply data) ViewSonic PJ1158 90
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 96
    2 bytes Connection ID 1 byte Reply 0x1D Data 2 bytes Connection ID 1 byte Reply 0x1F Status code 2 bytes Connection ID 1 byte Reply 0x1F Authentication Er- Connection ror code ID 0x04 0x00 1 byte ViewSonic PJ1158 91
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 97
    " in front of the commands and send the data. Send "e3d97429adffa11bce1f7275813d4bde"+command. 6) When the sending data is correct, the command will be performed and the reply data will be returned. Otherwise, an authentication error will be returned. ViewSonic PJ1158 92
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 98
    Replacing the lamp The lamp cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In case of replacement
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 99
    burst during use. • Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage. ViewSonic PJ1158 94
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 100
    . 8. Put the filter unit back into the projector. The front side of the projector The filter cover The filter cover knobs The filter unit The filter frame knob The filter frame The air filter The filter cover The fluted surface of the air filter (continued on next page) ViewSonic PJ1158 95
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 101
    . • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • The projector may display the message such as "CHECK THE AIR FLOW" or turn off the projector, to prevent the internal heat level rising. ViewSonic PJ1158 96
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 102
    • Do not short circuit or solder projector over again, so that the top of the projector is facing up. 3. While lifting the side of the projector closest to the lens replacing the battery. (Please refer to User's Manual-Network Functions: Date/Time Settings for more information.) ViewSonic PJ1158 97
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 103
    of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects. ViewSonic PJ1158 98
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 104
    when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the "Air Filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer. SEE MANUAL FURTHER INFO. ViewSonic PJ1158 99
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 105
    the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp cover. After performing any needed maintenance, turn the power on again. If the same indication is displayed after the remedy, please contact your dealer or service company. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 106
    Power ON" schedule is saved to the projector. (Please refer to the User's Manual-Network Functions: Schedule Settings for more projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. ViewSonic PJ1158
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 107
    cables. Signal source does not correctly work. Correctly set up the signal source device by referring to the manual of the source device. The input changeover settings are mismatched. Select the input signal, and correct the settings. Reference page 12 16 16 56 10 - 17, 18 ViewSonic PJ1158 102
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 108
    lens cover. The signal cables are not correctly connected. Correctly connect the connection cables. The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function or the remote control. The computer cannot detect the projector ViewSonic PJ1158 103
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 109
    from front side of the projector. Reference page 24, 25, 26 25, 36 56, 57 19, 30 61 4 NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. ViewSonic PJ1158 104
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 110
    "Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Specification Item Product name Liquid Panel size Crystal Drive system Panel Pixels Lens Lamp Speaker
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 111
    Specifications (continued) Specifications 319 418 [unit: mm] 154 139 ViewSonic PJ1158 106
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 112
    @sg.viewsonic.com [email protected] Hong Kong www.hk.viewsonic.com/support/ T= 852 3102 2900 [email protected] Macau www.hk.viewsonic.com/support/ T= 853 700 303 [email protected] Korea www.viewsonic.com T= 080 265 9080 [email protected] ViewSonic PJ1158 107
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 113
    (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. ViewSonic PJ1158 108
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 114
    ViewSonic service center, contact ViewSonic. 5. For applicable models with the PIN code security feature only. This projector contains a personal identification number (PIN) that restricts access to authorized users. If you forget to record the PIN code in the User Guide you specific legal rights
  • ViewSonic PJ1158 | PJ1158-1 User Guide, English - Page 115
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115

PJ1158
LCD Projector
ViewSonic
®
Model No. : VS11459
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
-
使用手冊
-
使用手冊