ViewSonic PJ406D User Guide
ViewSonic PJ406D - Portable DLP Projector Manual
 |
UPC - 766907162714
View all ViewSonic PJ406D manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJ406D manual content summary:
- ViewSonic PJ406D | User Guide - Page 1
ViewSonic® PJ406D DLP Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - Py - ViewSonic PJ406D | User Guide - Page 2
and used in accordance with the instructions, may cause harmful interference to assure continued FCC compliance, the user must use grounded power supply cord and the cables User Information for all Countries Notice: Use the cables which are included with the unit or specified. ViewSonic PJ406D i - ViewSonic PJ406D | User Guide - Page 3
in accordance with the manufacturer's instructions. 8. Do not install near any power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped. ViewSonic PJ406D - ViewSonic PJ406D | User Guide - Page 4
Product Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records PJ406D ViewSonic DLP Projector VS10873 PJ406D-1_UG_ENG Rev. 1A 08-01-05 The lamp in this product contains mercury. Please dispose of in accordance with local, state or federal laws. ViewSonic PJ406D iii - ViewSonic PJ406D | User Guide - Page 5
Remote Control...9 Connecting the Projector 10 Powering On/Off the Projector 11 Powering On the Projector 11 Powering Off the projector ...23 Lamp Setting ...25 Troubleshooting 26 Replacing the lamp 30 Compatibility Modes 31 Customer Support 32 Limited Warranty 33 ViewSonic PJ406D 1 - ViewSonic PJ406D | User Guide - Page 6
Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning- Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not - ViewSonic PJ406D | User Guide - Page 7
cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don any appliance that generates a strong magnetic field. - Place in direct sunlight. ViewSonic PJ406D 3 - ViewSonic PJ406D | User Guide - Page 8
Full function remote User friendly multilingual on screen display menu Advanced digital keystone correction and high quality full screen image re-scaling User friendly control panel Built-in speaker with 2Watt SXGA, XGA compression and VGA re-sizing Mac compatible ViewSonic PJ406D 4 - ViewSonic PJ406D | User Guide - Page 9
is missing. Projector with lens cap Power Cord VGA Cable 1.8m Composite Video Cable Soft Case 2 x Batteries Due to the difference in applications for each country, some regions may have different accessories. Quick Start Guide ViewSonic Wizard CD Remote Control ViewSonic PJ406D 5 - ViewSonic PJ406D | User Guide - Page 10
Product Overview Main Unit 1 2 3 7 9 4 6 5 8 7 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Zoom Lens 5. Elevator Foot 6. Elevator Button 7. IR Receivers 8. Connection Ports 9. Power Socket ViewSonic PJ406D 6 - ViewSonic PJ406D | User Guide - Page 11
2 1 10 MENU POWER TEMP LAMP POWER/ STANDBY 3 7 SOURC E - R E SYNC 5 8 4 9 7 6 1. Temp Indicator LED 2. Power Indicator LED 3. Lamp Indicator LED 4. Power/Standby 5. Menu (On/Off) 6. Re-Sync 7. Keystone Correction 8. Four Directional Select Keys 9. Source 10. Enter ViewSonic PJ406D 7 - ViewSonic PJ406D | User Guide - Page 12
USB Service 8 1. IR Receiver 2. USB Connector (service only) 3. Monitor Loop-through Output Connector 4. Composite Video Input Connector 5. S-Video Input Connector 6. Audio Input Connector 7. PC Analog signal/SCART RGB/HDTV/Component Video Input Connector 8. KensingtonTM Lock Port ViewSonic PJ406D - ViewSonic PJ406D | User Guide - Page 13
Remote Control 1 2 3 8 9 4 1. Power 10 5 2. IR LED 3. Hide 11 6 4 Freeze 5. Source Lock 12 7 6. Display Mode 7. Menu 13 8. Keystone Correction 9. Whisper 14 10. Keys 17 16 15. Re-Sync 18 16. VGA Source 17. Composite Video Source 18. S-Video Source ViewSonic PJ406D 9 - ViewSonic PJ406D | User Guide - Page 14
the projector works well with your computer, please set the display mode of your graphic card less than or equal to 1280 X 1024 resolution. Make sure the timing of the display mode is compatible with the projector. Refer to the "Compatibility Modes" section in User Guide. ViewSonic PJ406D 10 - ViewSonic PJ406D | User Guide - Page 15
your source automatically. If you connect multiple sources at the same time, use the "Source" button on the control panel or remote control to switch. - LAMP POWER/ STANDBY 2 Power/Standby R E SYNC Turn on the projector first and then the signal sources. Lens Cap 1 ViewSonic PJ406D 11 - ViewSonic PJ406D | User Guide - Page 16
contact your local dealer or our service center. When the "LAMP" indicator flashes red (1 second intervals), it indicates the fan failed. Stop using the projector and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. ViewSonic PJ406D 12 - ViewSonic PJ406D | User Guide - Page 17
Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for adjusting the image height. To raise the image: elevator foot into position. 3. Use to fine-tune the display angle. 1 2 Elevator Button 3 3 Elevator Foot ViewSonic PJ406D 13 - ViewSonic PJ406D | User Guide - Page 18
in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.9 to 32.8 feet (1.5 to 10.0 meters). Zoom Lever Focus Ring 184.9" x 138.7" (469.6 x 352.2cm) 32.8'(10.0m) This graph is for user's reference only. ViewSonic PJ406D 14 - ViewSonic PJ406D | User Guide - Page 19
ways for you to control the functions: Remote Control and Control Panel. Control Panel Remote Control MENU POWER TEMP LAMP POWER/ STANDBY SOURC E - R E SYNC Using the Control Panel Power/Standby Refer to 11-12. the "Power On/Off the Projector" section on pages Source Press - ViewSonic PJ406D | User Guide - Page 20
Remote Control Power Refer to the "Power On/Off the Projector , sRGB and User. Menu Press projector to the input source. Composite Press "Composite" to choose Composite video source. S-Video Press "S-video" to choose S-video source. VGA Press "VGA" to choose VGA connector. ViewSonic PJ406D - ViewSonic PJ406D | User Guide - Page 21
variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu " on the Remote Control or Control Panel. OSD menu will close and the projector will automatically save the new settings. Main Menu ViewSonic PJ406D Sub Menu Setting 17 - ViewSonic PJ406D | User Guide - Page 22
Language Management Lamp setting Display Lamp hours Lamp reset Lamp reminding Whisper mode Auto power off Sleep timer PC/Normal/Movie/sRGB/User 16:9/4:3 English/Deutsch/Français/Italiano/Español/ Português/Nederlands � On/Off On/Off Execute/Cancel Execute/Cancel On/Off On/Off ViewSonic PJ406D - ViewSonic PJ406D | User Guide - Page 23
selection. or key to Colour Setting Colour Setting Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for advanced adjustment of the individual colors. ViewSonic PJ406D 19 - ViewSonic PJ406D | User Guide - Page 24
or notebook. Movie: For home theater. Normal: For normal viewing condition. sRGB: For standard color. User: Memorize user's settings. Brightness Adjust the brightness of the image. Press the the screen looks colder; at lower temperature, the screen looks warmer. ViewSonic PJ406D 20 - ViewSonic PJ406D | User Guide - Page 25
"Saturation" function is not supported under computer mode. Saturation Adjusts a video image from black and white to fully saturated color. Press the to Adjusts the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. ViewSonic PJ406D 21 - ViewSonic PJ406D | User Guide - Page 26
Image-II "Frequency/Phase/ Hor. Position/Ver.position" function is not supported under video mode. Frequency "Frequency"changes the display data frequency to match the frequency of your computer's to 16:9. Press the to move the image down. Press the to move the image up. ViewSonic PJ406D 22 - ViewSonic PJ406D | User Guide - Page 27
Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling When speed continuously to allow for proper high altitude cooling of the projector. ViewSonic PJ406D 23 - ViewSonic PJ406D | User Guide - Page 28
the adjustments and settings to the factory default values. Execute: Returns the settings for all menus to factory default values. Cancel: Cancel the revised settings ViewSonic PJ406D 24 - ViewSonic PJ406D | User Guide - Page 29
the lamp life by up to 130%. Choose "Off" to return to normal mode. Auto Power Off Sets the interval of power-off of the system, if there is no signal input. (In minutes) Sleep Timer Sets the interval of power-off of the system, if there is no signal input. (In minutes) ViewSonic PJ406D 25 - ViewSonic PJ406D | User Guide - Page 30
Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. Ensure all the cables and power connections are correctly and securely connected as - ViewSonic PJ406D | User Guide - Page 31
restart all equipment including the projector. Problem: The screen of the Problem: Image has vertical flickering bar Use "Frequency" to make an adjustment. Refer to page 22. Check and reconfigure the display mode of your graphic card to make it compatible with the product. ViewSonic PJ406D - ViewSonic PJ406D | User Guide - Page 32
page 30. Problem: LED lighting message Message Standby State (Input power cord) Normal Mode Warming Cooling Error (Lamp failed) Error (Fan failed) Error (Over Temp.) Error (Lamp cover failed) Power LED Green Orange Flashing Flashing Temp LED Lamp LED Flashing Flashing ViewSonic PJ406D 28 - ViewSonic PJ406D | User Guide - Page 33
Problem: Message Reminders Standby : Replacing the lamp : Fan failed : Over temperature : Lamp life exceeded : ViewSonic PJ406D 29 - ViewSonic PJ406D | User Guide - Page 34
at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove the screw from the cover. 5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module. To replace the lamp module, reverse the previous steps. ViewSonic PJ406D 30 - ViewSonic PJ406D | User Guide - Page 35
VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA SVGA VESA SVGA VESA SVGA VESA SVGA VESA XGA VESA XGA VESA XGA VESA XGA VESA SXGA VESA SXGA VESA SXGA VESA 68.49 Remark : 1co.>m"p*u"tceormimpraegses.ed 2.> The interlaced analog signals are not supported. ViewSonic PJ406D 31 - ViewSonic PJ406D | User Guide - Page 36
.com service.eu@ viewsoniceurope.com service@au. viewsonic.com service@sg. viewsonic.com service@sd. viewsonic.com service@tw. viewsonic.com service.cn@cn. viewsonic.com service@jp. viewsonic.com service@hk. viewsonic.com service@kr. viewsonic.com service@sd. viewsonic.com ViewSonic PJ406D 32 - ViewSonic PJ406D | User Guide - Page 37
to you. Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. Warranty_Projectors Rev. 1d 4.3: Projector Warranty 1 of 1 Release Date: 03-31-05 ViewSonic PJ406D 33 - ViewSonic PJ406D | User Guide - Page 38
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
ViewSonic
®
PJ
40
6D
DLP Projector
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Py
ководство
польэователя
-
使用手冊
-
使用手冊