ViewSonic PJ506D PJ506D User Guide
ViewSonic PJ506D - SVGA DLP Projector Manual
 |
UPC - 766907232110
View all ViewSonic PJ506D manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJ506D manual content summary:
- ViewSonic PJ506D | PJ506D User Guide - Page 1
ViewSonic® PJ506D DLP Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - Py Model No. : VS11452 - ViewSonic PJ506D | PJ506D User Guide - Page 2
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful waste, but use the return and collection systems according to local law. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 3
guide for further instructions. 7. D o not block any ventilation openings. Install the equipment in accordance with the manufacturer's instructions. 8. Do not install near any heat sources electrician for replacement of the servicing to qualified service personnel. Service is ViewSonic PJ506D ii - ViewSonic PJ506D | PJ506D User Guide - Page 4
per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. by weight and as a cooper alloy containing up to 4% lead by weight. iii ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 5
the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: PJ506D ViewSonic DLP Projector Model Number: VS11452 Document Number: PJ506D-1_UG_ENG Rev. 1C Serial Number: Purchase Date: The lamp in this product contains mercury. Please dispose of in - ViewSonic PJ506D | PJ506D User Guide - Page 6
ventilation holes. The air coming out is hot. 10. Never open any covers on the projector except the lamp cover. Dangerous electrical voltages inside the projector can cause severe injury. Except as specifically directed in this User's Manual, do not attempt to service this product yourself. Refer - ViewSonic PJ506D | PJ506D User Guide - Page 7
to the projector. 15. When you replace the projector lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may shorten the bulb life. Use lint-free gloves or finger cots are recommended. 16. The product should be situated away from heat sources such - ViewSonic PJ506D | PJ506D User Guide - Page 8
AC Power Cord does not match your AC outlet, contact your sales dealer. This projector is equipped with a grounding type AC line plug. Make sure source device also equipped with a grounding type AC line plug to prevent from signal interference due to voltage fluctuation. Ground ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 9
24 Advanced (Computer / Video Mode 24 Audio (Computer / Video Mode 24 Maintenance...25 Cleaning the Lens 25 Cleaning the Projector Housing 25 Replacing the Lamp 26 Specifications...28 Appendix...29 LED Indicator Messages 29 Compatibility Modes 30 Troubleshooting 31 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 10
with Macintosh® computers Compatibility with NTSC, PAL, SECAM, and HDTV Multi-function remote control D-Sub 15-pin terminal for analog video connectivity User-friendly, multi-language on-screen display (OSD) Advanced electronic keystone correction * means compressed. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 11
SOURCE MENU ENTER BLANK LASER VOLUME 4:3/16:9 KEYSTONE MUTE Remote Control (IR) with Lithium battery Optional Accessory: Projector Carrying Case User's Manual Quick Start Guide loaded in the remote control. Remove the transparent insulation tape by pulling it before use. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 12
Projector Overview Front View 9 87 1 2 3 4 5 6 1 1 Ventilation holes 2 Projection lens 3 Front IR remote control sensor 4 Lens cap 5 Elevator foot 6 Elevator button 7 Zoom ring 8 Focus ring 9 Control panel ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 13
ports 4 Elevator button 5 Elevator foot 1 2 3 2 6 Speaker 7 AC power socket 8 Kensington lock Bottom View 1 Lamp cover 2 Ceiling mount 87 6 2 2 54 2 1 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 14
and phase. This function is available for computer mode only. 6 Menu Displays or exits the on-screen display menus. 7 Source Manually selects an input source. 8 Four directional buttons Use four directional buttons to select items or make adjustments to your selection. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 15
Ports 1 2 3 456 1 SERIAL When operating the projector via a computer, connect this to the controlling computer's RS-232C port. 2 USB Connector (Service purpose) This connector is for firmware update. 3 AUDIO IN Connects an audio output from video equipment to this jack. ViewSonic PJ506D 10 - ViewSonic PJ506D | PJ506D User Guide - Page 16
buttons 3. Menu button 4. Enter button 5. Keystone / buttons 6. Volume / buttons 7. Source button 8. Mute button 9. Blank button 10. 4:3/16:9 button 11. Auto button 1 7 POWER AUTO SOURCE 11 2 3 MENU 4 ENTER 9 BLANK 10 6 LASER 5 VOLUME 4:3/16:9 KEYSTONE MUTE 8 11 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 17
Remote Control 1. Power Refer to "Powering On/Off the Projector". 2. Four direction buttons 1 7 The four direction buttons can POWER AUTO SOURCE 11 be used to scroll through OSD (On-Screen 2 Display) menus and make adjustments. 3 3. Menu MENU Press the Menu button to activate the OSD - ViewSonic PJ506D | PJ506D User Guide - Page 18
control when not using for extended periods. Do not dispose of the used battery along with household waste. Dispose of used batteries according to local regulations. Danger of explosion may happen if batteries are incorrectly replaced. Replce all the batteries with new ones. 13 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 19
where the remote sensor is visible. Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic PJ506D 14 - ViewSonic PJ506D | PJ506D User Guide - Page 20
1 2 3 7 6 5 4 When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. The figure above is a sample projector may differ from the above illustration. The included cables are based on actual shipment delivery. 15 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 21
the projector. 4. Disconnect the power cord from the electrical outlet and the projector. 5. Do not turn on the projector immediately following a power off procedure. Please wait until the fan motor and the Lamp LED turn off before removing the AC power cord from the projector. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 22
lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position. To avoid damaging the projector, make sure that the elevator foot is fully retracted before placing the projector in its carrying case. 17 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 23
the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by rotating the zoom ring. Rotate to the right to reduce the image. Rotate to the left to enlarge the image. ViewSonic PJ506D 18 - ViewSonic PJ506D | PJ506D User Guide - Page 24
.00 Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Make sure the heat ventilation holes are not blocked. Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts. 19 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 25
Menu Operation The projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. ViewSonic PJ506D 20 - ViewSonic PJ506D | PJ506D User Guide - Page 26
the settings with / buttons. 4. To return to the main menu, toggle button. 5. To exit OSD, press Menu button. The OSD menu will close and the projector will automatically save the new settings. To exit OSD from the sub-menu, press Enter button. 21 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 27
controls the degree of difference between the lightest and darkest parts of Color Temperature Adjusts color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer. If you select "User", "Red", "Green" and "Blue" can be adjusted. ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 28
Manually adjusts blue. Video (Video Mode) Saturation Adjusts a video image from black and white to fully saturated color. Press to decrease the amount of color in the image. Press to increase the amount of color in the image. Tint Adjusts the color image up. 23 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 29
Source Select Automatically scans the input source projector lamp light output which will lower power consumption and increase lamp life. Lamp Hours Displays Hour the lamp's elapsed operating time (in hours). Color Space Manually of the projector. Factory Reset Press "Menu ViewSonic PJ506D 24 - ViewSonic PJ506D | PJ506D User Guide - Page 30
diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning: Never open any sprays. Use a soft cloth or lens paper only. 25 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 31
, the mercury inside the lamp will go out of the projector. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user's health. ViewSonic PJ506D 26 - ViewSonic PJ506D | PJ506D User Guide - Page 32
of glass, do not drop the unit and do not scratch the glass. Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed. 27 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 33
Resolution (Pixels) Lens Aspect Ratio Screen Size Lamp Projection Type Video Compatibility Input Source Scanning Frequency Horizontal Frequency Vertical Frequency Digital Keystone Correction Integrated Speaker Remote Control are subject to change without prior notice. ViewSonic PJ506D 28 - ViewSonic PJ506D | PJ506D User Guide - Page 34
LED Type Status Power LED Lamp LED Meaning Color Status Color Status Standby Green Flashing - - The projector is powered and ready. Lamp Amber Solid - - The projector system has some ignition problems with its fan, so the failure projector cannot start up. Power on Amber Solid Green - ViewSonic PJ506D | PJ506D User Guide - Page 35
Compatibility Modes Computer: Mode 480P VGA VGA VGA VGA VGA SVGA SVGA SVGA SVGA XGA XGA XGA XGA Mac16" SXGA SXGA 720P XGA XGA SXGA SXGA Mac 480-66A Resolution 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 720 x 400 800 x .7 kHz Vertical Frequency (Hz) 60 Hz 60 Hz 30 Hz ViewSonic PJ506D 30 - ViewSonic PJ506D | PJ506D User Guide - Page 36
Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service The input signal is not Press remote control's "Auto" Image is unstable supported by the projector. button. or flickering. The - ViewSonic PJ506D | PJ506D User Guide - Page 37
the and projector. remote control and projector. There are some fluorescent or Check that there are not other bright lights shining at any fluorescent or other the projector's infrared remote bright lights shining at the sensor. projector's infrared remote sensor. ViewSonic PJ506D 32 - ViewSonic PJ506D | PJ506D User Guide - Page 38
2 2249-1751 [email protected] Hong Kong www.hk.viewsonic.com/ support/ T= 852 3102 2900 [email protected] Macau www.hk.viewsonic.com/ support/ T= 853 700 303 [email protected] Korea www.viewsonic.com T= 080 265 9080 [email protected] 33 ViewSonic PJ506D - ViewSonic PJ506D | PJ506D User Guide - Page 39
of time. 4. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to Customer Support page). You will need to provide your product's serial number. ViewSonic PJ506D 34 - ViewSonic PJ506D | PJ506D User Guide - Page 40
the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information - ViewSonic PJ506D | PJ506D User Guide - Page 41
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
PJ506D
DLP Projector
ViewSonic
®
Model No. : VS11452
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Pyководство пользователя
-
使用手冊 (繁體)
-
使用手冊(简体)