Home » ViewSonic Manuals » Projectors » ViewSonic PJ510 » Manual Viewer

ViewSonic PJ510 User Guide

ViewSonic PJ510 - SVGA LCD Projector Manual

UPC - 766907013412

View all ViewSonic PJ510 manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ510 manual content summary:

ViewSonic PJ510 | User Guide - Page 1
PJ510 User Guide
ViewSonic PJ510 | User Guide - Page 2
Your Records ...1 Features ...2 Projector Features ...2 Part Names ...3 The Projector ...3 The Remote Control 5 Setting Up ...6 Arrangement ...6 Adjusting The Projector's Elevator 7 Connecting Your Devices PICTURE-2 Menu ...24 INPUT Menu ...25 AUTO Menu ...27 SCREEN Menu ...28 ViewSonic PJ510 i
ViewSonic PJ510 | User Guide - Page 3
OPTION Menu ...29 Lamp ...30 Replacing The Lamp 31 Air Filter ...32 Caring For The Air Filter 32 Replacing The Air Filter 33 Other Care ...34 Caring For The Inside Of The Projector 34 Caring For The Lens 34 Caring For The Cabinet And Remote Control 34 Troubleshooting ...35 Related Messages ...
ViewSonic PJ510 | User Guide - Page 4
product information as it becomes available, please register your projector's warranty on the Internet at: http://www.viewsonic.com For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: ViewSonic PJ510 VPROJ27995-1W A-CD-PJ510-1-UG 1 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 5
of foreign objects, do not put the projector in a case or a bag together with any things except the accessories of the projector, signal cables and connectors. WARNING: Before using this equipment, read this manual thoroughly. Always ensure that the equipment is used safely. ViewSonic PJ510 2
ViewSonic PJ510 | User Guide - Page 6
Part Names The Projector Zoom knob Focus ring Lens Air filter cover (An air filter is inside) Remote sensor Elevator button Lens cap Elevator feet Projector (Front/Right) Fastening The Lens Cap To avoid losing, please fasten the lens cap to the projector hole Push in Rivet 3 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 7
MENU buttons operate the menu function AUDIO R port AUDIO L port (from a video equipment) AUDIO port (from a computer) S-VIDEO port VIDEO port COMPONENT VIDEO -Y COMPONENT VIDEO - CB/PB COMPONENT VIDEO - CR/PR CONTROL port RGB port Power switch AC inlet Projector (Rear/Left) ViewSonic PJ510 4
ViewSonic PJ510 | User Guide - Page 8
input signal between the following signal ports of RGB, VIDEO, S-VIDEO and COMPONENT VIDEO. AUTO button executes automatic adjustment (STANDBY/ON) button opens/closes the menu. RESET button cancels the adjustment in progress. • The adjustments of the volume etc. are not reset. 5 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 9
• Install the projector in a suitable environment according to instructions of the "PJ510 QUICK START GUIDE" and this manual. • The power outlet should be close to the projector and easily accessible. 127(322) 152(386) Screen Lens center Side View Screen Lens center Side View ViewSonic PJ510 6
ViewSonic PJ510 | User Guide - Page 10
elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment adjust the height of the projector by twisting the elevator feet by hand. Elevator buttons Elevator feet 7 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 11
standard drivers in your computer, as this projector is a Plug-and-Play monitor. NOTE: • Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. ViewSonic PJ510 8
ViewSonic PJ510 | User Guide - Page 12
of the projector. You can see the ports. Connecting to a computer RGB out RGB cable (D-sub 15 pin) Audio out Audio cable (Stereo mini) RS-232C port RS-232C Cable If using a SCART RGB input, Video Audio out cable (with D-sub 15 pin) Audio out Audio cable (Stereo mini) 9 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 13
SHOCK. Please adhere to the "PJ510 UG - Safety Guide" and the following. • Only projector and wall outlet. 1 Connect the connector of the power cord to the AC inlet of the projector. 2 Firmly plug the power cord's plug into the outlet. AC Inlet Connector Side Power cord ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 14
batteries. Align and insert the two AA batteries according to their plus and minus terminals (as indicated in the remote control.). 3 Close the battery cover. Replace the cover in the direction of the arrow and snap it back into place. 11 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 15
period. • Replace the batteries whenever lamp), hit the projector's remote sensor, the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control's output signal to the projector. Remote sensor approximately 3 meters ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 16
green. According to a setup, the projector lamp may light up and the POWER indicator may begin blinking green, without pressing this button. When the power is completely on, the indicator will stop blinking and light green. STANDBY/ON button Power switch STANDBY/ON button 13 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 17
illustrated below, each time you press the VIDEO button, the projector switches between its input signal ports. Select the signal you wish to project. VIDEO button 2 Use the zoom ring to adjust the screen size. Zoom knob 3 Use the focus ring to focus the picture. Focus ring ViewSonic PJ510 14
ViewSonic PJ510 | User Guide - Page 18
off?" the message is visible. The projector lamp will go off, and the POWER lamp cooling is complete. STANDBY/ON button 3 Switch the power switch to [O] (OFF). Power switch (ON position) The POWER indicator will go off. 4 Attach the lens cap. Power switch STANDBY/ON button 15 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 19
sound. Press the VOLUME button to close the dialog box. (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) ViewSonic PJ510 16
ViewSonic PJ510 | User Guide - Page 20
(W), (X), (S), (T) buttons to adjust the position. When you want to initialize the position, press the RESET button during adjustment. Press the POSITION button again to close the dialog box and complete this operation. (Even to OSD menu and not the position of the picture. 17 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 21
may still be incorrectly adjusted. Use a bright screen when adjusting. Automatic Adjustment for Video Input The signal type best suited for the respective input signal is selected automatically. This keystone distortion will very under all input signals. Operating (continued) ViewSonic PJ510 18
ViewSonic PJ510 | User Guide - Page 22
, VOLUME, MUTE, POSITION OR MENU button.) • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long. Operating (continued) 19 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 23
OF RANGE". In this case, please select one of other aspect ratios. VIDEO, S-VIDEO, COMPONENT VIDEO input • At a COMPONENT VIDEO input of 16:9 Hi-Vision of 1125i (1035i/1080i)/750p. only 16 . (STANBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, POSITION OR MENU button.) ViewSonic PJ510 20
ViewSonic PJ510 | User Guide - Page 24
Settings Using The Menu Functions This projector has the following menus: MAIN (S), (T) buttons to operate the item. When you want to reset the adjustment, press the RESET button during the operation. Note that the items whose functions are . 5. Press the MENU button to exit. 21 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 25
projector screen is inclined or if the projector RESET Reset the MAIN Menu Items: Selecting the EXECUTE performs this function. EXECUTE (S)← CANCEL • The items of the MAIN menu are collectively returned to the initial setting. Note that the items WHISPER and LANGUAGE are not reset ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 26
the instructions in the when the USER is selected video inputs. This item can't be selected only at RGB inputs and SCART RGB inputs. Adjust the Tint: Green (S) Q (T) Red • This is a function for video inputs. This item can't be selected only at RGB inputs and SCART RGB inputs. 23 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 27
projector input or a COMPONENT VIDEO input. H SIZE Adjust Reset the PICTURE-2 Menu Items: Selecting the EXECUTE performs this function. EXECUTE (S) CANCEL • The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the H PHASE item is not reset. ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 28
with the instructions in VIDEO input of NTSC 3.58. • NORMAL is the mode for images with a lot of motions like movies, and STILL IMAGE is the mode for images with few motions or completely still ones like slides. • When this function performs, the VIDEO NR function is ineffective 25 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 29
of a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input of Reset the INPUT Menu Items: Selecting the EXECUTE performs this function. EXECUTE (S) CANCEL • The items of the INPUT menu are collectively returned to the initial setting. Note that the INFORMATION item is not reset. ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 30
ports, it will return to the state it was in prior to the search. Reset the AUTO Menu Items: Selecting the EXECUTE performs this function. EXECUTE (S) CANCEL • The items of the AUTO menu are collectively returned to the initial setting. Note that the item ADJUST is not reset. 27 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 31
Perform each operation in accordance with the instructions in the table below. Item Description RESET Reset the SCREEN Menu Items: Selecting the EXECUTE performs this function. EXECUTE (S) CANCEL • The items of the SCREEN menu are collectively returned to the initial setting.. ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 32
Filter" about cleaning and replacing the air filter. Reset the OPTION Menu Items: Selecting the EXECUTE performs this function. EXECUTE (S) CANCEL • The SCREEN TYPE item is returned to the initial setting. Note that the items VOLUME, LAMP TIMER and FILTER TIMER are not reset. 29 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 33
electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Use the lamp of the specified type only. (sold separately) • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Before replacing the lamp
ViewSonic PJ510 | User Guide - Page 34
not reset the lamp timer without replacing the lamp. • When you replace the lamp, please replace also the air filter. The air filter may be attached when you buy a replacement lamp for this projector. Please ask your dealer. If the indicators or a message prompts you to replace the lamp, replace the
ViewSonic PJ510 | User Guide - Page 35
type only. (sold separately) • Do not use the projector with the air filter and filter cover removed. The use without the air filter could result in damage. CAUTION • Do not reset the filter timer without cleaning or replacing the air filter. • If the air filter becomes clogged by dust or the like
ViewSonic PJ510 | User Guide - Page 36
4 Hold the release buttons of the air filter, while pulling down on it. 5 Insert a new air filter, and replace the filter cover. Air filter 6 Reset the filter timer, according to following "Reset The Filter Timer". (1) Turn on the projector. While the projector running, press the MENU button to
ViewSonic PJ510 | User Guide - Page 37
Other Care WARNING • Please carefully read the "PJ510 QUICK START GUIDE". • Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in. ATTENTION • Do not use cleaners or chemicals other than those
ViewSonic PJ510 | User Guide - Page 38
is no longer functional and should be replaced. Replace the lamp and do not forget to reset the timer. CLEAN THE AIR FILTER AFTER CLEANING AIR FILTER, RESET THE FILTER TIMER. A note of precaution when cleaning the air filter. After cleaning the filter, operate FILTER TIME of the OPTION Menu, then
ViewSonic PJ510 | User Guide - Page 39
area 4 Remove the air filter. Hold the release buttons of the air filter, while pulling it down. Release buttons 5 Wipe the dust-detecting window by using a soft cloth. Dust-detecting window (Rear side) (Bottom side) 6 Replace the air filter and filter cover. Air filter ViewSonic PJ510 36
ViewSonic PJ510 | User Guide - Page 40
in red Turned off The lamp cover has not been properly fixed (attached). Turn the power OFF and wait at least 45 minutes. After the unit has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power ON again. 37 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 41
is no air filter. Please immediately turn the power off, and clean or change the air filter by referring to the "Air Filter" section of this manual. After you have cleaned or changed the lamp, please be sure to reset the filter timer. After the treatment, resent the power to ON. ViewSonic PJ510 38
ViewSonic PJ510 | User Guide - Page 42
That May Easily Be Mistaken For Machine Defects WARNING Please carefully read the "PJ510 QUICK START GUIDE". Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing level. The lens cap has not been removed. Remove the lens cap. 39 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 43
-Service If a problem occurs with the equipment, first refer to the "Troubleshooting" section of this manual, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied. ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 44
Input Ports VIDEO 1 S-VIDEO 1 COMPONENT VIDEO (Y, CB/PB, CR/PR) 1 AUDIO Input Ports AUDIO 1 AUDIO R, L 1 CONTROL Ports CONTROL 1 Optional Parts Lamp: PRJ-RLC-008 For others, consult your dealer. NOTE: This specifications are subject to change without notice. 41 ViewSonic PJ510 (unit: mm
ViewSonic PJ510 | User Guide - Page 45
.com [email protected] T: +61 2 9929 3955 F: +61 2 9929 8393 T: 65 6273 4018 F: 65 6273 1566 T: 886 2 2246 3456 F: 886 2 8242 3668 T: 886 2 2246 3456 F: 886 2 8242 3668 [email protected] [email protected] [email protected] [email protected] ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 46
sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic projectors are warranted for three (3) years for all parts excluding the lamp and three (3) years
ViewSonic PJ510 | User Guide - Page 47
prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. 15 style (Figure A2), UL Listed, and CSA Labeled. For units which are mounted on a desk or table, type SVT cord sets may be used. The . ViewSonic PJ510 44
ViewSonic PJ510 | User Guide - Page 48
93/68/EEC Art.5 with regard to "Electromagnetic compatibility," and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to "Safety." User Information for all Countries NOTICE: Use the cables which are included with the projector or specified. 45 ViewSonic PJ510
ViewSonic PJ510 | User Guide - Page 49
ViewSonic Corporation

Section	Page
PJ510_UGTOC.pdf	2
PJ510_UG.pdf	4
Features	5
Projector Features	5
Ultra High Brightness	5
Partial Magnification Function	5
Keystone Distortion Correction	5
Whisper Mode Equipped	5
NOTE:	5
Projector	5
with Lens Cap	5
NOTE:	5
WARNING:	5
Part Names	6
The Projector	6
Projector (Front/Right)	6
Fastening The Lens Cap	6
1 Fix the strap to the strap ring of lens cap, as the right drawing.	6
2 Put one piece of the strap into the groove on rivet, as the right drawing.	6
3 Push the rivet into the strap hole.	6
Projector (Rear/Left)	7
The Remote Control	8
Setting Up	9
Arrangement	9
Reference for the 4:3 aspect ratio	9
Reference for the 16:9 aspect ratio	9
Adjusting The Projector’s Elevator	10
1 Press and hold in the elevator buttons.	10
2 Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock position.	10
3 As necessary, you can also adjust the height of the projector by twisting the elevator feet by hand.	10
Connecting Your Devices	11
NOTE:	11
About Plug-and-Play Capability	11
NOTE:	11
Connecting to a computer	12
If using a SCART RGB input,	12
Connecting to a DVD/VCR player	12
Connecting Power Supply	13
1 Connect the connector of the power cord to the AC inlet of the projector.	13
2 Firmly plug the power cord’s plug into the outlet.	13
Remote Control	14
Putting Batteries	14
1 Remove the battery cover.	14
2 Insert the batteries.	14
3 Close the battery cover.	14
Operating The Remote Control	15
Power ON/OFF	16
Turning On The Power	16
NOTE:	16
1 Make sure that the power cord is firmly and correctly connected to the projector and outlet.	16
2 When the lens cap is attached, remove the lens cap.	16
3 Set the power switch to [ \| ] (ON).	16
4 Press the STANDBY/ON button of the projector or the remote control.	16
Selecting An Input Signal	17
1 Using the projector’s control button	17
Press the INPUT button.	17
Selecting a RGB signal, using the remote control	17
Press the RGB button.	17
Selecting a video signal, using the remote control	17
Press the VIDEO button.	17
2 Use the zoom ring to adjust the screen size.	17
3 Use the focus ring to focus the picture.	17
Turning Off The Power	18
NOTE:	18
1 Press the STANDBY/ON button of the projector or the remote control.	18
2 Press the STANDBY/ON button again while “Power off?” the message is visible.	18
3 Switch the power switch to [O] (OFF).	18
4 Attach the lens cap.	18
Operating	19
Adjusting The Volume	19
1 Press the VOLUME button.	19
2 Use the (p), (q) buttons to adjust the volume.	19
Temporarily Muting The Sound	19
1 Press the MUTE button.	19
Adjusting The Position	20
1 Press the POSITION button.	20
2 Use the (t), (u), (p), (q) buttons to adjust the position.	20
NOTE:	20
Using The Automatic Adjustment Feature	21
1 Press the AUTO button.	21
NOTE:	21
Correcting Keystone Distortions	21
1 Press the KEYSTONE button.	21
2 Use the (p), (q) buttons to correct distortion	21
NOTE:	21
Using The Magnify Feature	22
1 Press the MAGNIFY (ON) button	22
2 Press the POSITION button, then use the (t), (u), (p), (q) buttons to select the area to zoom. Press the POSITION button again to finalize the zoom area.	22
3 Use the (p), (q) buttons to adjust the zoom level	22
NOTE:	22
Freezing The Screen	22
1 Press the FREEZE button	22
NOTE:	22
Signal Searching	23
1 Press the SEARCH button	23
NOTE:	23
Selecting The Aspect Ratio	23
1 Press the ASPECT button	23
Temporarily Blanking The Screen	23
1 Press the BLANK button	23
NOTE:	23
Multifunctional Settings	24
Using The Menu Functions	24
1 Press the MENU button.	24
2 Use the (p), (q) buttons to select a menu, then press the (u) or ENTER button.	24
3 Use the (p), (q) buttons to select an item, then press the (u) or ENTER button.	24
4 Use the (p), (q) buttons to operate the item.	24
[ex. Adjusting VOLUME]	24
MAIN Menu	25
PICTURE-1 Menu	26
PICTURE-2 Menu	27
INPUT Menu	28
AUTO Menu	30
SCREEN Menu	31
OPTION Menu	32
Lamp	33
Replacing The Lamp	34
1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes.	34
2 Contact your local dealer to prepare a new lamp. Tell the dealer your lamp type number. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.	34
3 After making sure that the projector has cooled adequately, slowly flip over the projector, so that the bottom is facing up.	34
4 Hold the release button while sliding out the lamp cover.	34
5 Unscrew the 2 screws, and slowly pick up the lamp by the handles.	34
6 Insert the new lamp, and tighten the 2 screws firmly to lock it in place.	34
7 Slide the lamp cover into place until it locks into position.	34
8 Slowly turn the projector so that the top is facing up.	34
9 Turn on the projector, and reset the lamp timer.	34
Air Filter	35
Caring For The Air Filter	35
1 Turn off the projector, and unplug the power cord.	35
2 Apply a vacuum cleaner to the top of the filter cover to clean the air filter.	35
3 Reset the filter timer, according to following “Reset The Filter Timer”.	35
Replacing The Air Filter	36
1 Turn off the projector, and unplug the power cord.	36
2 Contact your local dealer to prepare a new air filter. Tell the dealer your air filter type number.	36
3 After making sure that the projector has cooled adequately, remove the filter cover. Hold the release buttons of the filter cover, while pulling it up.	36
4 Hold the release buttons of the air filter, while pulling down on it.	36
5 Insert a new air filter, and replace the filter cover.	36
6 Reset the filter timer, according to following “Reset The Filter Timer”.	36
Other Care	37
Caring For The Inside Of The Projector	37
Caring For The Lens	37
1 Turn off the projector, and unplug the power cord.	37
2 Lightly wipe the lens with a commercially available lens- cleaning wipe. Do not touch the lens directly with your hand.	37
Caring For The Cabinet And Remote Control	37
1 Turn off the projector, and unplug the power cord.	37
2 Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.	37
Troubleshooting	38
Related Messages	38
TO MAXIMIZE PERFORMANCE, LAMP REPLACEMENT IS RECOMMENDED.	38
The unit does not display a warning message on the screen when the lamp expires or fails. When the lamp does not light, this indicates that the lamp is no longer functional and should be replaced. Replace the lamp and do not forget to reset the timer.	38
CLEAN THE AIR FILTER	38
AFTER CLEANING AIR FILTER,	38
RESET THE FILTER TIMER.	38
A note of precaution when cleaning the air filter.	38
After cleaning the filter, operate FILTER TIME of the OPTION Menu, then perform reset of the filter timer.	38
NO INPUT IS DETECTED	38
ON ***	38
There is no input signal.	38
Check the signal input connection and the status of the signal source.	38
SYNC IS OUT OF RANGE	38
ON ***	38
The horizontal or vertical frequencies of the inputted signal is outside of the operating range limits of this unit. Please confirm the specs for this unit or the signal source specs.	38
CHECK THE AIR FLOW	38
The internal temperature is rising. Please turn the power OFF, then allow the unit to cool down for approximately 20 minutes. After hav- ing confirmed the following items, then please reset the power to ON.	38
. Is there blockage of the air filter?	38
. Is the air filter dirty?	38
. Does the ambient temperature exceeds 35C?	38
CLEAN THE AIR FILTER	38
POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER.	38
A note of precaution when cleaning the air filter.	38
Please immediately turn the power off, and clean or change the air filter by referring to the “Air Filter” section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer.	38
If the same message is displayed after the treatment, please clean the transparent area of filter cover and the dust-detecting window, according to the following.	38
Note:	38
1 Turn off the projector, and unplug the power cord.	39
2 After making sure that the projector has cooled adequately, remove the filter cover. Hold the release buttons of the filter cover, while pulling it up.	39
3 Wipe the transparent area of the filter cover by using a swab or a soft cloth.	39
4 Remove the air filter. Hold the release buttons of the air filter, while pulling it down.	39
5 Wipe the dust-detecting window by using a soft cloth.	39
6 Replace the air filter and filter cover.	39
Regarding The Indicator Lamps	40
POWER indicator	40
LAMP indicator	40
TEMP indicator	40
Description	40
Lighting in orange	40
Turned off	40
Turned off	40
The unit is in a standby state. Please refer to the “Power ON/OFF” section of this manual.	40
Flashing in green	40
Turned off	40
Turned off	40
The unit is warming up. Please wait.	40
Lighting in green	40
Turned off	40
Turned off	40
The unit is in an ON state. Ordinary operations may be performed.	40
Flashing in orange	40
Turned off	40
Turned off	40
The unit is cooling down. Please wait.	40
Blinking in red	40
-	40
-	40
The unit is cooling down. A certain error has been detected. Wait until the POWER indicator has finished flashing, and then perform the proper response measure using the item descriptions below as reference.	40
Lighting or blinking in red	40
Lighting in red	40
Turned off	40
The projector lamp has not been properly fixed (attached), the projector lamp does not light, and/or there is a possibility that...	40
. Is there blockage of the air passage aperture?	40
. Is the air filter is dirty?	40
. Does the peripheral temperature exceed 35C?	40
Lighting or blinking in red	40
Blinking in red	40
Turned off	40
The lamp cover has not been properly fixed (attached). Turn the power OFF and wait at least 45 minutes. After the unit has suffi...	40
POWER indicator	41
LAMP indicator	41
TEMP indicator	41
Description	41
Lighting or blanking in red	41
Turned off	41
Blinking in red	41
The cooling fan is not operating. Turn the power OFF and wait at least 20 minutes. After the unit has sufficiently cooled down, please make confirmation of the following item, and then resent the power to ON.	41
. Is there no foreign matter caught in the cooling fan?	41
Lighting or blinking in red	41
Turned off	41
Lighting in red	41
There is a possibility that the interior portion has become heated. Turn the power OFF and wait at least 20 minutes. After the unit has sufficiently cooled down, please make confirmation of the following item, and then resent the power to ON.	41
. Is there blockage of the air passage aperture?	41
. Is the air filter is dirty?	41
. Does the peripheral temperature exceed 35C?	41
Lighting in green	41
Alternative blinking in the red	41
There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (0C to 35C). After the treatment, resent the power to ON.	41
Lighting in green	41
Simultaneous blinking in red	41
It is time to clean the air filter, or there is no air filter. Please immediately turn the power off, and clean or change the ai...	41
Phenomena That May Easily Be Mistaken For Machine Defects	42
NOTE:	42
Phenomenon	42
Cases not involving a machine defect, and Items to be confirmed	42
Power does not come ON.	42
The main power source is not ON.	42
Turn on the main power.	42
The electrical power cord is not plugged in.	42
Correctly connect the power cord.	42
The main power source has been interrupted during operation, such as by a power outage (blackout), etc.	42
Be sure to press the “°³” (power OFF) side of the main power switch, and leave this OFF for at least 20 minutes. After the unit has sufficiently cooled down, turn ON the power source.	42
Neither sounds nor pictures are outputted.	42
The input changeover settings are mismatched.	42
Select the input signal, and correct the settings.	42
No signal is being inputted.	42
Correctly connect the connection cables.	42
Pictures are displayed, but no sounds are heard.	42
The electrical wiring to this unit is not correctly connected.	42
Correctly connect the connection cables.	42
The volume setting has been set at (or adjusted to) an extremely low level.	42
Adjust the VOLUME setting to a higher level.	42
The MUTE mode is the current setting.	42
Press the MUTE button to release (change) the MUTE mode setting.	42
Sounds are heard, but no pictures are displayed.	42
The electrical wiring to this unit is not correctly connected.	42
Correctly connect the connection cables.	42
The brightness setting has been set at (or adjusted to) an extremely low level.	42
Adjust the BRIGHT setting to a brighter level.	42
The lens cap has not been removed.	42
Remove the lens cap.	42
Phenomenon	43
Cases not involving a machine defect, and Items to be confirmed	43
Colors have a faded- out appearance, or Color tone is poor.	43
Color settings are not correctly adjusted.	43
Perform picture adjustments by changing the COLOR BAL R, COLOR BAL G, COLOR BAL B, COLOR, and/or the TINT settings, etc.	43
Pictures appear dark.	43
The brightness setting and/or contrast setting has not been properly adjusted.	43
Perform picture adjustments by changing the BRIGHT and/or CONTRAST settings, etc.	43
The WHISPER mode is the current setting.	43
Change (by releasing) from the WHISPER mode.	43
Lamp is approaching the end of its product lifetime.	43
Exchange the old lamp with a new lamp.	43
Pictures appear blurry.	43
Either the FOCUS setting or the H PHASE is not properly adjusted.	43
Adjust the focus and the H PHASE setting.	43
Warranty And After-Service	43
Specifications	44
Product name	44
Liquid crystal panel	44
Panel size	44
Drive system	44
Pixels	44
NOTE:	44
Customer Support	45
LIMITED WARRANTY	46
VIEWSONIC Projector	46
Appendix	47
Power Cord Safety Guidelines	47
USA UL	47
Canada CSA	47
Germany VDE	47
Switzerland SEV	47
Britain BASE/BS	47
Japan Electric Appliance Control Act	47
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM	47
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.	47
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.	47
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET.	47
If a new plug is to be fitted, please observe the wiring code as shown below.	47
If in any doubt, please consult a qualified electrician.	47
WARNING: THIS APPLIANCE MUST BE EARTHED.	47
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:	47
Green-and-Yellow: Earth	47
Blue: Neutral	47
Brown: Live	47
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:	47
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.	47
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLAC...	47
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION	47
The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be use...	47
The female receptacle of the cord set must meet CEE-22 requirements and may look like (Figure A1 below):	47
For the United States and Canada	47
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. For units which are m...	47
For European Countries	47
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.	47
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product.	47
Compliance Information for U.S.A.	48
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC ...	48
FCC Warning	48
To assure continued FCC compliance, the user must use grounded power supply cord and the provided shielded video interface cable...	48
Instructions to Users	48
Compliance Information for Canada	48
Compliance Information for European Countries	48
CE Conformity	48
The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/ 31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”	48

Match case Limit results 1 per page

PJ510

User Guide