Home » ViewSonic Manuals » Projectors » ViewSonic PJ551D » Manual Viewer

ViewSonic PJ551D User Guide

ViewSonic PJ551D - XGA DLP Projector Manual

UPC - 766907285710

View all ViewSonic PJ551D manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ551D manual content summary:

ViewSonic PJ551D | User Guide - Page 1
ViewSonic® PJ551D/PJ551D-2 DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited
ViewSonic PJ551D | User Guide - Page 2
Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic PJ551D
ViewSonic PJ551D | User Guide - Page 3
Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. If still not clean, see "Cleaning the Display" in this guide for further instructions. 7. Do
ViewSonic PJ551D | User Guide - Page 4
the Council on restriction of the use of certain hazardous substances in electrical lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts ViewSonic iii PJ551D
ViewSonic PJ551D | User Guide - Page 5
the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJ551D ViewSonic DLP Projector VS11973 PJ551D/-2_UG_ENG Rev. 1A 11-30-07 The lamp in this product contains mercury. Please dispose of in
ViewSonic PJ551D | User Guide - Page 6
18 Cleaning the Lens 18 Cleaning the Projector Housing 18 Replacing the Lamp 19 Specifications 21 Appendix 22 LED Indicator Messages 22 Compatibility Modes 23 Troubleshooting ...24 Other Information 25 Customer Support 25 Limited Warranty 26 Mexico Limited Warranty 28 ViewSonic PJ551D
ViewSonic PJ551D | User Guide - Page 7
integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. „ The projector offers the following features: „ Single chip 0.55" Texas Instruments DLP® technology „ XGA (1024 x 768 pixels) „ Auto image re-sizing (Auto-Sync.) to
ViewSonic PJ551D | User Guide - Page 8
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) Remote Control (IR) User's Manual Quick Start Guide „ Save the original shipping carton and packing material; they will comein handy if you
ViewSonic PJ551D | User Guide - Page 9
Projector Overview Front View 11 10 9 8 7 1 2 3 45 6 1 Lens cap 2 Elevator button 3 Lens cap strap 4 Projection lens 5 Front IR remote control sensor 6 Ventilation holes 7 AC power socket 8 Control panel 9 Zoom ring 10 Focus ring 11 Lamp cover ViewSonic 3 PJ551D
ViewSonic PJ551D | User Guide - Page 10
4 1 Connection ports 2 Kensington lock 3 Rear IR remote control sensor 4 Ventilation holes Bottom View 1 2 3 1 Elevator foot 2 Ceiling mount 3 Tilt-adjustment foot „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. ViewSonic 4 PJ551D
ViewSonic PJ551D | User Guide - Page 11
Setting, Lamp Counter Reset and Factory Default menu operations. 5 Resync Resynchronize the projector to the input signal from a computer. 6 Power Turn the projector on or off. 7 Menu Display or exit the on-screen display menus. 8 Source Manually select an input source. ViewSonic 5 PJ551D
ViewSonic PJ551D | User Guide - Page 12
component) to this jack. 3 S-Video Connect S-Video output from video equipment to this jack. 4 Video Connect composite video output from video equipment to this jack. 5 SERVICE This connector is for firmware update. ViewSonic 6 PJ551D
ViewSonic PJ551D | User Guide - Page 13
Remote Control 1 Power Turn the projector on or off. 2 Four directional buttons Use four directional buttons keyboard. This function is only available when the projector is connected to a computer via a USB cable. 7 Source Manually selects an input source. 8 Freeze Press " only. ViewSonic 7 PJ551D
ViewSonic PJ551D | User Guide - Page 14
to fire or water. „ Do not dispose of the used battery along with household waste. Dispose of used batteries according to local regulations. „ Danger of explosion may happen if batteries are incorrectly replaced. Replace only with the same type recommended by the manufacturer. ViewSonic 8 PJ551D
ViewSonic PJ551D | User Guide - Page 15
projector from the rear Freeze Blank Keystone Page Page Source Keystone ViewMatch Auto 10 15 5m 7m 5m 5m 10 15 5m 7m „ The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. „ Operate the remote control
ViewSonic PJ551D | User Guide - Page 16
1 1 2 3 45 „ When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. „ The figure above is with the projector may differ from the above illustration. The included cables are based on actual shipment delivery. ViewSonic 10 PJ551D
ViewSonic PJ551D | User Guide - Page 17
the lens. Powering Off the Projector: 1. Press button to turn off the projector lamp. You will see a message projector. 3. Disconnect the AC power cord from the electrical outlet and the projector. 4. Do not turn on the projector immediately following a power off procedure. ViewSonic 11 PJ551D
ViewSonic PJ551D | User Guide - Page 18
foot are fully retracted before placing the projector in its carrying case. Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust the image by sliding the zoom ring. ViewSonic 12 PJ551D
ViewSonic PJ551D | User Guide - Page 19
position; other positions can cause heat build-up and damage to the projector. „ Make sure the heat ventilation holes are not blocked. „ Do not use the projector in a smoky environment. Smoke residue may cause build-up on critical parts (i.e. DMD, lens assembly, etc.) ViewSonic 13 PJ551D
ViewSonic PJ551D | User Guide - Page 20
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. High Filter Mode ViewSonic 14 PJ551D
ViewSonic PJ551D | User Guide - Page 21
2. When OSD is displayed, use S / T to select any OSD menu will close and the projector will automatically save the new settings. the difference between light and dark areas. warmer. If you select "User", "Red", "Green" and PC standard color. „ User : Memorize user's settings. Screen Type Select
ViewSonic PJ551D | User Guide - Page 22
the lamp's elapsed operating time (in hours). Lamp Counter Reset Reset the lamp counter to 0 hours. Power Saving If no operation is performed for a specific period of time, the power to the projector is automatically turned off. Auto Source Automatically scan the input source. ViewSonic 16 PJ551D
ViewSonic PJ551D | User Guide - Page 23
ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. High Altitude Turning on High Altitude mode operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Filter Mode When an
ViewSonic PJ551D | User Guide - Page 24
as dust, dirt or spots will project on the screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning: Never open any of the covers on the
ViewSonic PJ551D | User Guide - Page 25
, the mercury inside the lamp will go out of the projector. Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user's health. ViewSonic 19 PJ551D
ViewSonic PJ551D | User Guide - Page 26
of glass, do not drop the unit and do not scratch the glass. „ Do not reuse the old lamp. This could cause the lamp to explode. „ Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. „ Do not use the projector with the lamp cover removed. ViewSonic 20 PJ551D
ViewSonic PJ551D | User Guide - Page 27
Specifications Display Type Single 0.55" DLP panel Resolution (Pixels) XGA (1024 × 768) Lens Manual Zoom (1.1x) Contrast Ratio 2000:1 Screen Size 30" - 250" Lamp mm Weight 2.5 kg (5.5lb) Note: Design and Specifications are subject to change without prior notice. ViewSonic 21 PJ551D
ViewSonic PJ551D | User Guide - Page 28
the power off before the Lamp LED changes to flashing. The fan motor will turn off when the lamp has cooled. Temperature is too high. The lamp will turn off. The fan motor is cooling the lamp. The lamp ignition failed. If temperature is too high, the fans will cool the lamp. ViewSonic 22 PJ551D
ViewSonic PJ551D | User Guide - Page 29
Compatibility Modes Computer: Compatibility VGA Resolution 640 x 480 SVGA 800 x 600 XGA SXGA WXGA 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 1280 x 768 1280 x 800 H-Sync [KHz] 31.5 37.9 37.5 43.3 Vertical Frequency (Hz) 60 Hz 60 Hz 50 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz ViewSonic 23 PJ551D
ViewSonic PJ551D | User Guide - Page 30
front or back of the projector. Use the remote control within the effective range. „ Aim the remote control at the screen or at the front or back of the projector. „ Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic 24 PJ551D
ViewSonic PJ551D | User Guide - Page 31
South Africa www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm United Kingdom United States www.viewsoniceurope.com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/Support/Calldesk.htm T= 1-800-688-6688 F= 1-909-468-1202 [email protected] ViewSonic 25 PJ551D
ViewSonic PJ551D | User Guide - Page 32
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
ViewSonic PJ551D | User Guide - Page 33
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card. For users in Europe and Russia, full details of warranty provided can be found in www. viewsoniceurope.com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1h 06-25-07 27 PJ551D
ViewSonic PJ551D | User Guide - Page 34
repair, or failure to follow instructions supplied with the product. b. Any damage of the product due to shipment. c. Causes external to the product, such as electrical power fluctuations or failure. d. Use of supplies or parts not meeting ViewSonic's specifications. e. Normal wear and tear
ViewSonic PJ551D | User Guide - Page 35
for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com
ViewSonic PJ551D | User Guide - Page 36

Section	Page
Introduction	7
Projector Features	7
Package Contents	8
Projector with Lens Cap	8
AC Power Cord	8
VGA Cable (D-SUB to D-SUB)	8
User’s Manual	8
Projector Overview	9
Using the Product	11
Control Panel	11
Connection Ports	12
Remote Control	13
For the first time use:	14
For battery change:	14
1. Push the catch to the right and remove the battery holder.	14
2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark “+” is up.	14
3. Push the battery holder back into the remote control until you feel a click.	14
Remote Control Operation	15
Installation	16
Connecting the Projector	16
Powering On/Off the Projector	17
Powering On the Projector:	17
1. Remove the projector lens cap.	17
2. Complete the AC power cord and peripheral signal cable(s) connections.	17
3. Press button to turn on the projector. The projector takes a minute or so to warm up.	17
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	17
Powering Off the Projector:	17
1. Press button to turn off the projector lamp. You will see a message \	17
2. Press button again to confirm.	17
3. Disconnect the AC power cord from the electrical outlet and the projector.	17
4. Do not turn on the projector immediately following a power off procedure.	17
Adjusting the Projector	18
Adjusting the Projector Height	18
1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.	18
2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.	18
Adjusting the Projector Zoom and Focus	18
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	18
2. Adjust the image by sliding the zoom ring.	18
Adjusting Projection Image Size	19
Menu Operation	20
1. Press the Menu button to open the OSD menu.	21
2. When OSD is displayed, use p / q to select any feature in the main menu.	21
3. After selecting the desired main menu feature, press u to enter sub-menu for feature setting.	21
4. Adjust the settings with t / u.	21
5. Press the Menu button, the screen will return to the main menu.	21
6. To exit OSD, Press the Menu button again. The OSD menu will close and the projector will automatically save the new settings.	21
Maintenance	24
Cleaning the Lens	24
Cleaning the Projector Housing	24
Replacing the Lamp	25
1. Turn off the projector.	26
2. If the projector is installed in a ceiling mount, remove it from the mount.	26
3. Unplug the power cord.	26
4. Loosen the screw in the side of the lamp cover and remove the cover.	26
5. Remove the screws from the lamp module, raise the handle, and lift out the module.	26
6. Insert the new lamp module into the projector and tighten the screws.	26
7. Replace the lamp cover and tighten the screw.	26
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	26
9. Reset the lamp hour. Refer to the “Setting” menu.	26
Specifications	28
LED Indicator Messages	28
Compatibility Modes	29
Computer:	29
Video:	29
Troubleshooting	30
Start-up problems	30
Image problems	30