ViewSonic PJ862 User Manual

ViewSonic PJ862 Manual

Get ViewSonic PJ862 PDF manuals and user guides View all ViewSonic PJ862 manuals
Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ862 manual content summary:

  • ViewSonic PJ862 | User Manual - Page 1
    ViewSonic ® PJ862 Portable LCD Projector User Guide Guide de l'utilisateur Bedienungsanleitung Guía del usuario Guida dell'utente Guia do usuário Användarhandbok Käyttöopas
  • ViewSonic PJ862 | User Manual - Page 2
    a Class B digital device, pursuant to part 15 of the FCC Rules. These limits installed and used in accordance with the instructions, may cause harmful interference to radio determined by turning the equipment off and on, the user is encouraged to try to correct the interference by ViewSonic PJ862 i
  • ViewSonic PJ862 | User Manual - Page 3
    personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped. ViewSonic PJ862 ii
  • ViewSonic PJ862 | User Manual - Page 4
    additional product information as it becomes available, please register your projector's warranty on the Internet at: http://www.viewsonic.com For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: ViewSonic PJ862 VS10461 A-CD-PJ862 ViewSonic PJ862 iii
  • ViewSonic PJ862 | User Manual - Page 5
    PJ-862 User Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using, read the "User's Manual - Safety Instruction Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual
  • ViewSonic PJ862 | User Manual - Page 6
    , H. position, H. size, Auto adjust execute VIDEO Qlty. Menu 31 Progressive, 3D-YCS, Video NR Part names 4 INPUT Menu 32 Projector 4 Color space, Component, Video format, Control buttons 5 DVI, Information Remote control 5 SETUP Menu 34 Setting up 6 Whisper, Mirror, Volume, Stereo, IR
  • ViewSonic PJ862 | User Manual - Page 7
    part. Fastening the lens cap To avoid losing, please fasten the lens cap to the projector using the strap. Strap ring Strap 1. Fix the strap to the strap ring of lens cap. 2. Put the strap into the groove on rivet. 3. Push the rivet into the strap hole. Strap hole Bottom side ViewSonic PJ862
  • ViewSonic PJ862 | User Manual - Page 8
    Part names Part names Projector Zoom knob (18) Focus ring (18) Vent (6) Lens (16) Front-Right side Lamp cover (45) (Lamp unit is inside.) Remote sensor (15) Speaker Elevator button (8) Elevator foot (8) Filter cover (46) (Air filter and intake vent are inside.) Control buttons (5) (See
  • ViewSonic PJ862 | User Manual - Page 9
    16) STANDBY/ON INPUT KEYSTONE INPUT button (17) KEYSTONE button (20) RESET button (23) LAMP TEMP POWER MENU RESET Part names LAMP incicator (50) TEMP indicator (50) POWER indicator (16) Cursor buttons 23) Remote control STANDBY/ON button (16) VIDEO button (17) BLANK button (21) ASPECT
  • ViewSonic PJ862 | User Manual - Page 10
    shock and/or malfunction to the projector. • Don't place the projector near a humidifier, a smoking space or a kitchen. • Put nothing containing the liquid near the projector. ►Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. ViewSonic PJ862 6
  • ViewSonic PJ862 | User Manual - Page 11
    full size screen: 1024 x 768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the screen (±10%) (b) 4:3 (a) 16 257 (101) 250 (6.4) 8.4 (329) 10.1 (396) -10 (-4) 322 (127) 300 (7.6) 10.0 (395) 12.1 (476) -12 (-5) 386 (152) ViewSonic PJ862 7
  • ViewSonic PJ862 | User Manual - Page 12
    Raise or lower the projector to the desired height and the release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position. 3. As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand. ViewSonic PJ862 8
  • ViewSonic PJ862 | User Manual - Page 13
    placed lens-side up, hold the projector. 2. Unhooking the filter cover's claws, pull the filter cover in the direction of the arrow to remove it. 3. Replace the filter cover for bottom-up use and snap it back into place. 4. Slowly turn the projector so that the top is facing up. ViewSonic PJ862 9
  • ViewSonic PJ862 | User Manual - Page 14
    to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. • Secure
  • ViewSonic PJ862 | User Manual - Page 15
    Connecting to a speaker with amplifier (output) Audio in LAN USB DC OUT RGB IN1 COMPONENT VIDEO RGB OUT CR/PR CB/PB Y RGB IN2 CONTROL DVI-D AUDIO-IN AUDIO-OUT REMOTE CONTROL R-AUDIO IN-L VIDEO S-VIDEO Stereo mini audio cable ViewSonic PJ862 11
  • ViewSonic PJ862 | User Manual - Page 16
    CONTROL RGB out LAN port LAN USB DC OUT RGB IN1 RGB IN2 COMPONENT VIDEO RGB OUT LAN cable (CAT-5) CR/PR CB/PB Y Component video out R-AUDIO IN-L VIDEO RGB cable S-VIDEO Y CONTROL CB/PB CR/PR Component video cable DVI-D AUDIO-IN AUDIO-OUT REMOTE CONTROL ViewSonic PJ862
  • ViewSonic PJ862 | User Manual - Page 17
    result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. ViewSonic PJ862 13
  • ViewSonic PJ862 | User Manual - Page 18
    direction of the arrow. 2. Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control. 3. Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. ViewSonic PJ862 14
  • ViewSonic PJ862 | User Manual - Page 19
    the remote control for an extended period. • Replace the batteries whenever the remote control starts to malfunction. • When strong lights, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector's remote sensor, the remote control
  • ViewSonic PJ862 | User Manual - Page 20
    the projector or remote control. The projector lamp will light up light to solid orange when the lamp cooling is complete. 3. Make sure that the power indicator lights to solid orange, set the power switch to the OFF position. The POWER indicator will go off. Attach the lens cap. ViewSonic PJ862
  • ViewSonic PJ862 | User Manual - Page 21
    /ON 1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input INPUT KEYSTONE MENU RESET port as below.   RGB IN1  RGB IN2  DVI-D VIDEO S-VIDEO COMPONENT VIDEO 1. Press the RGB button on the remote control to select an input port for RGB
  • ViewSonic PJ862 | User Manual - Page 22
    -TOUCH ESC MENU RESET 1. Press the ONE TOUCH button on the remote control. This activates the following functions at one time. POSITION AUTO MAGNIFY ON VOLUME  Signal search: Projector will cycle through its Focus ring Zoom knob 2. Use the focus ring to focus the picture. ViewSonic PJ862 18
  • ViewSonic PJ862 | User Manual - Page 23
    the position 1. Press the POSITION button on the remote control. The "POSITION" indication will appear on the screen. PUSH ENTER ESC MENU RESET 2. Use the cursor buttons to adjust the appear outside a picture. ● This function does not work when DVI-D input port is selected. ViewSonic PJ862 19
  • ViewSonic PJ862 | User Manual - Page 24
    projector or the remote control. A dialog will appear on KEYSTONE the screen to aid you in correcting the AUTO EXECUTE MANUAL +0 +0 distortion. 2. Use the cursor buttons ▲/▼ to select AUTO or MANUAL , it will be restored when the projector exit the MAGNIFY mode. ViewSonic PJ862 20
  • ViewSonic PJ862 | User Manual - Page 25
    one of the projector's buttons or the remote control buttons except the disk pad including the center button for the left click PUSH ENTER or the right mouse button is pressed. ESC MENU RESET POSITION AUTO MAGNIFY ON VOLUME FREEZE MUTE OFF KEYSTONE ONE TOUCH ViewSonic PJ862 21
  • ViewSonic PJ862 | User Manual - Page 26
    utility program. See your computer's hardware manual for details. • The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer's configurations and mouse drivers. • The USB control can be used only for the functions
  • ViewSonic PJ862 | User Manual - Page 27
    NORMAL RESET 2. Use the cursor buttons ▲/▼ to select a menu. If you want to change it to the EASY MENU, select the FILTER TIME 0 LANGUAGE ENGLISH Go To Advance Menu... EASY MENU. Then press the cursor button ► on the projector or remote control, or
  • ViewSonic PJ862 | User Manual - Page 28
    projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 MODE NORMAL BRIGHT +0 CONTRAST +0 COLOR +0 TINT +0 SHARPNESS +3 WHISPER NORMAL MIRROR NORMAL RESET FILTER menu (34). ViewSonic PJ862 24
  • ViewSonic PJ862 | User Manual - Page 29
    the item FILTER TIME of section OPTION menu (39). Select the LANGUAGE to toggle the menu language. Refer to description of LANGUAGE in the SCREEN menu (35). Select the "Go To Advanced Menu" to use the menu of PICTURE, IMAGE, VIDEO Qlty., INPUT, SETUP, SCREEN, OPTION or NETWORK. ViewSonic PJ862 25
  • ViewSonic PJ862 | User Manual - Page 30
    projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control . : Light  Dark controlled with any of equalizing adjustment bar. • When this function is performed, a certain extra such as a line may appear. ViewSonic PJ862 26
  • ViewSonic PJ862 | User Manual - Page 31
    . Using the buttons ▲/▼ adjusts the tint. Green  Red • This item can be selected only at a video signal. Using the buttons ▲/▼ adjusts the sharpness. Strong  Weak ViewSonic PJ862 27
  • ViewSonic PJ862 | User Manual - Page 32
    button performs each function. LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on TEMP is not stored, it is memorized that the CUSTOM is selected. ViewSonic PJ862 28
  • ViewSonic PJ862 | User Manual - Page 33
    using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to signal of 525i(480i)/625i(576i) from the component video port. ViewSonic PJ862 29
  • ViewSonic PJ862 | User Manual - Page 34
    picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature please note that it may not function correctly with some input. ViewSonic PJ862 30
  • ViewSonic PJ862 | User Manual - Page 35
    the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring function is excessive, it may cause a certain degradation of the picture. ViewSonic PJ862 31
  • ViewSonic PJ862 | User Manual - Page 36
    using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to " in spite of the signal source, the computer or the DVD player. ViewSonic PJ862 32
  • ViewSonic PJ862 | User Manual - Page 37
    a SCART RGB input port. Please refer to the item COMPONENT in this section. (32) • This item can't be selected at no signal and sync out. ViewSonic PJ862 33
  • ViewSonic PJ862 | User Manual - Page 38
    below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] :SELECT
  • ViewSonic PJ862 | User Manual - Page 39
    remote control to progress. Then perform it referring to the following table. EASY MENU ASPECT 4:3 MODE NORMAL BRIGHT +0 CONTRAST +0 COLOR +0 TINT +0 SHARPNESS +3 WHISPER NORMAL MIRROR NORMAL RESET FILTER (36). ViewSonic PJ862 35
  • ViewSonic PJ862 | User Manual - Page 40
    The picture will freeze and the frame for capturing appears. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjust the frame position. Please move the frame to the be performed. Use this function for protecting the current MyScreen. ViewSonic PJ862 36
  • ViewSonic PJ862 | User Manual - Page 41
    the input "Detecting...." while an input signal is detected The indication of the input signal by changing The indication of the aspect ration by changing ViewSonic PJ862 37
  • ViewSonic PJ862 | User Manual - Page 42
    . Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table
  • ViewSonic PJ862 | User Manual - Page 43
    the remote control or the button ► of the projector for about 3 seconds displays a dialog. To reset the lamp time, select the RESET using the button ▲. RESET  CANCEL • Please reset the lamp time only when you have replaced the lamp, for correct messages about the lamp. • About the lamp replacement
  • ViewSonic PJ862 | User Manual - Page 44
    the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it this item shows the information about the current network setting of the projector. ViewSonic PJ862 40
  • ViewSonic PJ862 | User Manual - Page 45
    support the DHCP function Please set the IP address, the subnet mask, the default gateway and the DHCP using the NETWORK menu. At first, set the DHCP function to TURN OFF. It is also possible to configure the projector Setting Allows you to change the login password. (Screen 6) ViewSonic PJ862 41
  • ViewSonic PJ862 | User Manual - Page 46
    settings NETWORK Menu (continued) Information 1) Allows you to confirm the current network settings of the projector. 2) Click on "return to top page" to return to Screen 2. Screen 3 IP Confi is case sensitive and can be up to 16 single-byte alphanumeric characters in length. ViewSonic PJ862 42
  • ViewSonic PJ862 | User Manual - Page 47
    have the settings take effect. 5. Close the Web browser to end the configuration session. NOTE • If the Projector Network Configuration dialog is accessed by more than one computer at the same time, the last computer to login PC, the 10-minute timeout will no longer be in effect. ViewSonic PJ862 43
  • ViewSonic PJ862 | User Manual - Page 48
    there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • If the indicators or a message prompts you to replace the lamp (see the section
  • ViewSonic PJ862 | User Manual - Page 49
    POWER WILL TURN OFF AFTER 0hr." is displayed, complete the following operation within 10 minutes of switching power on. • Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions. ViewSonic PJ862 45
  • ViewSonic PJ862 | User Manual - Page 50
    up. 10. Turn the projector on, and reset the filter time using the FILTER TIME function of OPTION menu (39). NOTE • Incorrectly resetting of the filter timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions. ViewSonic PJ862 46
  • ViewSonic PJ862 | User Manual - Page 51
    to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as
  • ViewSonic PJ862 | User Manual - Page 52
    Troubleshooting Troubleshooting Related messages When service company. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message To maximize performance, lamp replacements source specs. ViewSonic PJ862 48
  • ViewSonic PJ862 | User Manual - Page 53
    menu. A note of precaution when cleaning the air filter. Please immediately turn the power OFF, and clean or change the air filter by referring to the "Air Filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer(39). ViewSonic PJ862 49
  • ViewSonic PJ862 | User Manual - Page 54
    the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp cover. After performing any needed maintenance, turn the power on again. If the same indication is displayed after the treatment, please contact your dealer or service company. ViewSonic PJ862 50
  • ViewSonic PJ862 | User Manual - Page 55
    lamps may also be turned off. In such a case, press the "" (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. ViewSonic PJ862
  • ViewSonic PJ862 | User Manual - Page 56
    . Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. Reference page 13 16 16 44, 45 ViewSonic PJ862 52
  • ViewSonic PJ862 | User Manual - Page 57
    is adjusted to an extremely low level. displayed. Adjust the BRIGHT to a higher level using the menu function 24, 26 or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer's can detect a plug and play monitor using other plug and play
  • ViewSonic PJ862 | User Manual - Page 58
    (Y, CB/PB, CR/PR)...... RCA x3 S-Video 1 Video 1 Communication port: CONTROL D-sub 9pin x1 USB USB(B) x1 LAN RJ45 x1 Other port: WIRED REMOTE x1 DC OUT x1 Optional parts Lamp Air filter and the others RLC-003 Please consult your dealer or ViewSonic for part information. ViewSonic PJ862 54
  • ViewSonic PJ862 | User Manual - Page 59
    Specifications (continued) Specifications NN NN NN NN ViewSonic PJ862 55
  • ViewSonic PJ862 | User Manual - Page 60
    service.eu@ viewsoniceurope.com T: +61 2 9906 6277 F: +61 2 9906 6377 T: 65 273 4018 F: 65 273 1566 service@au. viewsonic.com service@sg. viewsonic.com T: 886 2 2246 3456 F: 886 2 8242 3668 T: 886 2 2246 3456 F: 886 2 8242 3668 service@sd. viewsonic.com service@hk. viewsonic.com ViewSonic PJ862
  • ViewSonic PJ862 | User Manual - Page 61
    to the product, such as electric power fluctuations or failure. f . Use of supplies or parts not meeting ViewSonic's specifications. g . Normal wear and tear. h . Any other cause which does not relate to a product defect. 3 .Removal, installation, and set-up service charges. ViewSonic PJ862 57
  • ViewSonic PJ862 | User Manual - Page 62
    damages, so the above limitations and exclusions may not apply to you. Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. Projector Warranty (V3.1) ViewSonic PJ862 58
  • ViewSonic PJ862 | User Manual - Page 63
    ViewSonic®
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
ViewSonic
®
PJ862
Portable LCD Projector
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell’utente
Guia do usuário
Användarhandbok
Käyttöopas
Руководство
пользователя
使用手冊
使用手冊