Home » ViewSonic Manuals » Projectors » ViewSonic PJD5112 » Manual Viewer

ViewSonic PJD5112 PJD5112 User Guide (English)

ViewSonic PJD5112 - s SVGA DLP Projector Manual

UPC - 766907399615

View all ViewSonic PJD5112 manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJD5112 manual content summary:

ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 1
ViewSonic® PJD5112 DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 2
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are installed and used in accordance with the instructions, may cause harmful interference to radio determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 3
unit in accordance with the manufacturer's instructions. 8. Do not install near any for replacement of the obsolete outlet. 10. Protect the power cord from servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as: if the power-supply
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 4
Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices). 3. Lead in
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 5
the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJD5112 ViewSonic DLP Projector VS12618 PJD5112_UG_ENG Rev. 1C 04-19-10 The lamp in this product contains mercury. Please dispose of in
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 6
confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 7
CONTENTS Introduction ...5 Projector Features ...5 Package Contents ...6 Projector Overview ...7 Using the Product 9 Control Panel ...9 Connection Ports ...10 Remote Control ...11 Replacing the Battery 12 Remote Control Operation 13 Installation ...14 Connecting the Projector 14 Powering On/Off
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 8
use. The projector offers the following features: „ Single chip 1.397cm / 0.55" Texas Instruments DLP® technology „ SVGA (800 x 600 pixels) „ Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling compression compatibility for VGA, SVGA, XGA and SXGA „ Compatibility with Macintosh
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 9
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) ViewSonic CD Wizard Optional accessories Quick Start Guide VGA Cable (D-SUB to D-SUB) RS232 cable P/N: J2552-0208-00 RGB to component adapter
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 10
Projector Overview Front View 11 10 9 8 7 1 23 45 6 1 Lens cap 2 Elevator button 3 Lens cap strap 4 Projection lens 5 Front IR remote control sensor 6 Ventilation holes (intake) 7 Speaker 8 Focus ring 9 Zoom ring 10 Control panel 11 Lamp cover EN-7
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 11
lock 4 Rear IR remote control sensor 5 Ventilation holes (exhaust) 6 Security bar Bottom View 143.0mm 1 2 1 Ceiling mount (M46) 2 Tilt-adjustment feet 70.0mm 90.0mm „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. „ Contact your
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 12
Control Panel LED 91 23 4 5 8 6 74 1 Power (Power LED indicator) Refer to "LED Indicator Messages". 2 TEMP (Temperature LED indicator) Refer to "LED Indicator Messages". 3 LAMP (Lamp LED indicator) Refer to "LED Indicator Messages". Button Function 4 / Keystone Manually correct
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 13
10 1 USB This connector is for firmware update and mouse function support. 2 VIDEO Connect composite video output from video equipment to this jack. to this jack. 6 RS-232 When operating the projector via a computer, connect this to the controlling computer's RS-232C port. 7 COMPUTER IN 2 Connect
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 14
Remote Control 1 POWER Turn the projector image distortion caused by tilting the projector. 7 Magnify Zoom in and the freeze function. 8 Source Manually select an input source. 13 14 Blank Resynchronize the projector to the Cut off Switch between OSD control and Mouse control (Apply to Navigation
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 15
the mark "+" is up. 3. Push the battery holder back into the remote control until you feel a click. Caution „ Risk of explosion if battery is replaced by an incorrect type. „ Dispose of used batteries according to the instructions. „ Make sure the plus and minus terminals are correctly aligned when
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 16
„ Operating the projector from the rear 10 15 5m 7m 5m 5m 10 15 5m 7m „ The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. „ Operate the remote control from a position where the remote sensor is visible
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 17
HDTV (RCA) Cable 6 Composite Video Cable 7 S-Video Cable Laptop type Desktop type 2 1 232 4 5 76 5 4 4 WPG-350 „ When connecting cable, power cords of both projector and external equipment should be disconnected from AC outlet. „ The figure above is a sample connection. This does not mean
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 18
„ If you are connecting multiple sources to the projector simultaneously, press the SOURCE button on the control panel or the Source button on the remote control. Warning „ Remove the lens cap first before powering on. „ Never look into the lens when the lamp is on. This can damage your eyes. „ This
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 19
, make sure that the elevator foot and tilt- adjustment foot are fully retracted before placing the projector in its carrying case. Adjusting the Projector Zoom and Focus Zoom ring Focus ring 1. Focus the image by rotating the focus ring. A still image is recommended for focusing. 2. Adjust
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 20
a space of 30 cm or more between the sides of the projector. „ Do not use the projector in a smoky environment. Smoke residue may build- up on critical parts and damage the projector or its performance. „ Consult with your dealer for special installation such as suspending from a ceiling. EN-17
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 21
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 22
1 Adjustable range and default setting vary depending on signal type. 2 This function is only available when the projector is installed an optional filter cover. EN-19
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 23
OSD menu will close and the projector will automatically save the new user color temperature. User Color User Color provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference. Keystone Manually
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 24
Disable 3D function „ 3D-Vision: For NVIDIA 3D Vision application „ DLP-LINK: For TI 3D DLP-LINK application 3D Sync Invert (for TI 3D DLP-LINK only) „ On: Invert left and right frame contents. „ Off: Default frame contents. Computer Image (Computer Mode) Frequency Adjust the timing of the projector
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 25
Reset the filter Hour to 0 hours. Power Saving If no operation is performed for a specific period of time, projector will automatically turn off. Auto Source Automatically scan through all the input source. ECO Mode Use this function to dim the projector lamp light output which will lower power
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 26
. Screen Capture Capture the current projection screen as a start-up screen. Start-up Screen Select start-up screen when the projector is powered on or when no signal is input. "User" is the screen that you captured. Zoom Zoom in and out the images. DCR (Dynamic Contrast Ratio) Enable DCR will
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 27
parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector dry cloth. „ Turn off the projector and remove the AC power cord from the power outlet before beginning maintenance work. „ Make sure the lens
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 28
message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. „ The lamp is extremely hot right after turning off the projector. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least 45 minutes for
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 29
a ceiling mount, remove it 3. Unplug the power cord. 4. Loosen the screw in the side of the lamp cover and remove the cover. 5. Remove the screws from the lamp module, raise the handle, and lift out the module. 6. Insert the new lamp module into the projector and tighten the screws. 7. Replace the
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 30
Specifications Display system Single 1.397cm / 0.55" DLP panel Resolution SVGA (800 × 600) Zoom 1.2X F/No. 2.54 - 2.78 Focal length 18.36 - 22.02mm Screen size 101.6cm ~ 762cm / 40" - 300" Lamp x 1 Control terminal RS-232 x 1, USB x 1 Speaker 2 watt x 1 Video compatibility NTSC,
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 31
Red Solid (Full brightness) Flash Off Off Solid Solid Meaning The projector is in standby mode. Powering up Normal operation Power-down The projector system has some problems with its fans, so the projector cannot start up. The lamp is in good condition and is projecting at maximum brightness. The
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 32
Modes Computer: Compatibility VGA Resolution 640 x 480 SVGA 640 x 480 @ 120Hz 720 x 400 800 x 600 XGA 800 x 600 @ 120Hz 1024 x 768 SXGA 1024 x 768 @ 120Hz 1152 x 864 1280 x 960 1280 x 1024 1280 x 960 1280 x 1024 14460 x 1050 1600 x 1200 H-Sync [KHz]
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 33
Video: Signal 1080i 1080i 1080p 1080p 720p 720p 576p 576i 480p 480i Horizontal Frequency (kHz) 33.8 28.1 67.5 56.3 45.0 37.5 31.3 15.8 31.5 15.8 Vertical Frequency (Hz) 60.0 50.0 60.0 50.0 60.0 50.0 50.0 50.0 60.0 60.0 EN-30
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 34
Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: „ Be sure that the power cord is
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 35
COM1 Name Operation CRC type Power ON OFF BE, EF , 03, 06, 00, Factory Reset BE, EF, 03, 06, 00, Lamp Hour BE, EF, 03, 06 58, DA, 57, D0, 86, D1, DF, DF, 3D, DE, 10, DB, 23, DB, F2, DA, 0D, Lamp Hour 70, 00, 00, 00, 00, 00 Version 71, 00, 00, 00, 00, 00 03:Projector ON (Normal Mode) EN-32
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 36
D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR 1 Black 2 Brown 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 8 Purple 9 White SHELL DW C2 1 2 3 4 5 6 7 8 9 SHELL EN-33
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 37
IR Control Code Key Power Source Up Down Left Right MENU Auto Mouse ViewMatch Freeze Enter / Mouse Left Exit / Mouse Right KeyS+ KeySDigital Zoom+ Digital ZoomVolume+ VolumeMute Blank Format NEC
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 38
@viewsonic.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] United Kingdom United States www.viewsoniceurope.com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/support
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 39
like product. Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty Subject to the more limited one (1) year warranty set out below, North and South America: Three (3) years warranty for all parts excluding the lamp, three
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 40
h. Use of supplies or parts not meeting ViewSonic's specifications. i. Normal wear and tear. j. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 41
repair, or failure to follow instructions supplied with the product. b. Any damage of the product due to shipment. c. Causes external to the product, such as electrical power fluctuations or failure. d. Use of supplies or parts not meeting ViewSonic's specifications. e. Normal wear and tear
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 42
Acapulco Monterrey: GS Computación (Grupo Sesicomp) Global Product Services Progreso #6-A, Colo Centro Mar Caribe # 1987, Esquina 15-13-67-00 E-Mail. [email protected] Tijuana: FOR USA SUPPORT: STD ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut,
ViewSonic PJD5112 | PJD5112 User Guide (English) - Page 43

Section	Page
PJD5112_UG_ENG.pdf	6
Introduction	8
Projector Features	8
Package Contents	9
Projector with Lens Cap	9
AC Power Cord	9
VGA Cable (D-SUB to D-SUB)	9
Projector Overview	10
Using the Product	12
Control Panel	12
Connection Ports	13
Remote Control	14
Replacing the Battery	15
1. Push the catch to the left and remove the battery holder.	15
2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark “+” is up.	15
3. Push the battery holder back into the remote control until you feel a click.	15
Remote Control Operation	16
Installation	17
Connecting the Projector	17
Powering On/Off the Projector	18
Powering On the Projector:	18
1. Remove the projector lens cap.	18
2. Complete the AC power cord and peripheral signal cable(s) connections.	18
3. Press button to turn on the projector. The projector takes a minute or so to warm up.	18
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	18
Powering Off the Projector:	18
1. Press button to turn off the projector lamp. You will see a message \	18
2. Press button again to confirm.	18
3. Disconnect the AC power cord from the electrical outlet and the projector.	18
4. Do not turn on the projector right after power off.	18
Adjusting the Projector	19
Adjusting the Projector Height	19
1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.	19
2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.	19
Adjusting the Projector Zoom and Focus	19
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	19
2. Adjust the image by sliding the zoom ring.	19
Adjusting Projection Image Size	20
Menu Operation	21
1. Press the MENU button to open the OSD menu.	23
2. When OSD is displayed, use p / q to select any feature in the main menu.	23
3. After selecting the desired main menu item, press u to enter sub-menu for feature setting.	23
4. Use p / q to select the desired item and adjust the settings with t / u.	23
5. Press the MENU button, the screen will return to the main menu.	23
6. To exit OSD, Press the MENU button again. The OSD menu will close and the projector will automatically save the new settings.	23
Maintenance	27
Cleaning the Lens	27
Cleaning the Projector Housing	27
Cleaning the Filter Cover	27
1. Switch the projector off and unplug the AC power cord from the wall socket.	27
2. Remove the filter cover as the illustration shown.	27
3. Clean the filter cover.	27
4. Replace the filter cover.	27
5. Attach the filter cover.	27
6. Plug the power back into the projector.	27
Replacing the Lamp	28
1. Turn off the projector.	29
2. If the projector is installed in a ceiling mount, remove it	29
3. Unplug the power cord.	29
4. Loosen the screw in the side of the lamp cover and remove the cover.	29
5. Remove the screws from the lamp module, raise the handle, and lift out the module.	29
6. Insert the new lamp module into the projector and tighten the screws.	29
7. Replace the lamp cover and tighten the screw.	29
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	29
9. Reset the lamp hour. Refer to the “Setting” menu.	29
Specifications	30
Appendix	31
LED Indicator Messages	31
Compatibility Modes	32
Computer:	32
Video:	33
Troubleshooting	34
Start-up problems	34
Image problems	34
RS-232 Command and Configuration	35