ViewSonic PJD5122 PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English)
ViewSonic PJD5122 Manual
UPC - 766907449815
View all ViewSonic PJD5122 manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJD5122 manual content summary:
- ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 1
ViewSonic® PJD5211/PJD5221/ PJD5231/PJD5122 DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 2
Class B digital device, pursuant to part 15 of the FCC Rules. used in accordance with the instructions, may cause harmful interference turning the equipment off and on, the user is encouraged to try to correct the . Warning: You are cautioned that changes or modifications not expressly approved by the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 3
Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices). 3. Lead in - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 4
mail or fax to ViewSonic. Product Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records PJD5211/PJD5221/PJD5231/PJD5122 ViewSonic DLP Projector VS13304/VS13305/VS13306/VS13308 PJD5211_5221_5231_5122_UG_ENG Rev. 1A 02-23-10 The lamp in this product contains mercury - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 5
operation 36 Maintenance 43 Care of the projector 43 Lamp information 44 Troubleshooting 50 Specifications 51 Projector specifications 51 Dimensions 52 Ceiling mount installation 52 Timing chart 52 Copyright information 54 Appendix 55 IR control table 55 RS232 command table 55 2 Table - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 6
power supply (UPS). 6. Do not block the projection lens with any objects when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press BLANK on the projector or remote control. 7. The lamp - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 7
, disconnect it from the power supply's wall socket and call your local service center to have the projector serviced. 18. This product is capable of displaying inverted pictures for ceiling mount installation. Use only qualified ceiling mount kit for mounting the projector and ensure it is securely - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 8
balance control for data/video display • High brightness projection lamp • Ability to display 16.7 million colors • Multi-language On-Screen Display (OSD) menus • Switchable normal and economic modes to reduce the power consumption • Component HDTV compatibility (YPbPr) • High quality manual zoom - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 9
region, and may differ from those illustrated. Projector Power Cord VGA Cable Multi-language user manual DVD Quick Start Guide Pull the tab before using the remote control. Remote Control & Battery Optional accessories 1. Ceiling mount 2. Replacement lamp 3. Soft carry case 6 Introduction - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 10
18 1. External control panel (See "Projector and remote control" on page 8 for details.) 2. Vent (heated air exhaust) 3. Quick-release button 4. Lens cover 5. Focus ring and Zoom ring 6. Front IR remote sensor 7. Projection lens 8. AC power cord inlet 5 9. RS-232 control port 10. RGB - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 11
and functions Projector and remote control 14 20 5 10 1 2 15 3 9 21 4 5 16 6 10 7 17 13 11 8 22 12 23 18 6 13 24 19 25 1. Focus ring 5. II POWER Adjusts the focus of the projected image. Toggles the projector between standby See "Fine-tuning the image size and - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 12
lamp has developed a (OSD) menu item. problem. See "Indicators" on page 49 for 18. Keystone keys ( / ) details. Manually panel key lock. See "Locking 20. Blank control keys" on page 33 for details. Hides the on page 29 for details. Toggles the projector audio between on Enacts the selected On - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 13
Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. Replacing the remote control battery 1. Pull out the battery holder. Please follow the illustrated instructions. Push and hold the locking arm while pulling out - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 14
the screen. Purchase the projector ceiling mount kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on. 3. Rear Ceiling Select this location with the projector suspended upside-down from the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 15
these numbers due to optical component variations. It is recommended that if you intend to permanently install the projector, you projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 16
audio cable and connect one end of the cable to the AUDIO OUT socket of the projector, and the other end to your external speakers (not supplied). Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. The final connection path should be like that shown in the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 17
Connect the projector to a computer as described in "Connecting a computer" on page 13. 2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the video monitor. Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 18
mono) speaker in your presentations, and also connect separate amplified speakers to the Audio Out socket of the projector. The audio output is a mixed mono signal and controlled by the projector Volume and Mute settings. If you have a separate sound system, you will most likely want to connect the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 19
device. To connect the projector to a Component Video source the projector. 3. If you wish to make use of the projector the projector. 4. If projector, and the other end to your external speakers Once connected, the audio can be controlled by the projector displayed after the projector is turned on - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 20
another suitable audio cable and connect one end of the cable to the AUDIO OUT socket of the projector, and the other end to your external speakers Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. The final connection path should be like that shown in the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 21
suitable audio cable and connect one end of the cable to the AUDIO OUT socket of the projector, and the other end to your external speakers Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. The final connection path should be like that shown in the following - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 22
If it is closed, it could become deformed due to the heat produced by the projection lamp. 3. Press II POWER on the projector or remote control to start the projector. The POWER indicator light stays blue when the projector is on. The start up procedure takes about 30 seconds. In the later stage of - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 23
on the projector or remote control to select your desired input signal. See "Switching input signal" on page 24 for details. If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message 'Out of Range' displayed on a blank screen. Please change to - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 24
Off Disable ViewSonic MENU Exit Language Projector Position Auto Power Off Blank Timer Panel Key Lock Timer Controller Splash Screen English Front Table Disable Disable Off Disable ViewSonic Analog RGB MENU Exit 4. Press MENU/EXIT twice* on the projector or Exit on the remote control to leave - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 25
. Press MODE/ENTER on the projector or Enter on the remote control. The Security Settings page is displayed. 2. Highlight Power On Lock and select On by Password Keep this user manual in a safe place. 5. To leave the OSD menu, press MENU/EXIT on the projector or Exit on the remote control. If you - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 26
. You can press MENU/EXIT on the projector or Exit on the remote control to cancel the change or try another password. 4. Enter a new password. The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance or right after the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 27
can press MENU/EXIT on the projector or Exit on the remote control to cancel the change or try another password. Though want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 28
the lamp may cause damage to your eyes. • Be careful when you press the adjuster button as it is close to the exhaust vent where hot air comes from. Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 29
to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the top - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 30
and scale the image output to a different aspect than that of the image input signal. To change the projected image ratio (no matter what aspect the source is): 1. Press MENU/EXIT on the projector or MENU on the remote control and then press / until the DISPLAY menu is highlighted. Operation 27 - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 31
white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want to 16:10 picture - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 32
one of the following steps. • Press MODE/ENTER on the projector or Color Mode on the remote control repeatedly until your desired mode is selected. • Go to the DVs through the PC input for best viewing in a blackened (little light) environment. 5. User 1/User 2 mode: Recalls the settings customized - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 33
to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details. 7. When all settings have been done, highlight Save Settings and press MODE/ENTER on the projector or Enter on the remote control to store the settings. 8. The - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 34
in the projected picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. When Off - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 35
make adjustments. To adjust the settings: 1. Go to the DISPLAY menu and highlight Color Management. 2. Press MODE/ENTER on the projector or Enter on the remote control and the Color Management page is displayed. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 36
from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except II POWER. 1. Press on the projector or go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing / on the projector or remote control - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 37
the screen. To release the function, press any key on the projector or remote control. Even if an image is frozen on the screen, the projector from over-heating. In cases like this, you should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this projector - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 38
continue to run for approximately 90 seconds to cool down the projector. 3. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. CAUTION • To protect the lamp, the projector will not respond to any commands during the cooling process. • To - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 39
Phase H. Size Zoom 3D Sync TI 3D DLP Link/Off 3D Sync Invert Disable/Invert Primary Color R/G/B/C/M/Y Color Hue Management Saturation Gain PC source: Brightest/Daylight/ViewMatch/ Color Mode Cinema/User 1/User 2 Video source: Brightest/Gaming/ViewMatch/ Cinema/User 1/User 2 PC source - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 40
/CC3/CC4 Lamp Mode Normal/Economic Lamp Settings Reset Lamp Timer Equivalent Lamp Hour Security Settings Change Password Power On Lock On/Off Reset All Settings On/Off 6. INFORMATION Current System Status • Source • Color Mode • Resolution • Color System • Equivalent Lamp Hour Operation - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 41
shown on the lower position of the page change with every key press you made until they 3D glasses to view the 3D images. • TI 3D DLP Link: Enable projector for TI 3D DLP Link. • Off: Disable 3D. 3D Sync Invert When the 3D correct the problem. (For TI 3D DLP Link only) Color Management See "Color - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 42
Mode Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 30 for details. Brightness Adjusts the brightness of the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 43
functions except II POWER on the projector and keys on the remote control. See "Locking control keys" on page 33 for details. Timer Controller Sets the auto- . Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 44
an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input. See by selecting On when the selected input signal carries closed captions. • Captions: An on-screen a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 45
the current signal source. Color Mode Shows the selected mode in the PICTURE menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format, NTSC, PAL, SECAM, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. 42 Operation - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 46
the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 51 or consult your dealer about the range. • Retract the adjuster feet. • Remove the battery from the remote control - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 47
menu. 4. To leave the menu, press MENU/EXIT on the projector or Exit on the remote control. You can also get the lamp hour information on the INFORMATION menu. Extending lamp life The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 48
not replaced beforehand, it must be replaced after 4000 hours usage. The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > 4000 Hours Lamp usage time exceeded OK Notice Lamp usage time exceeded Replace lamp (refer to User Manual) Then reset lamp timer - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 49
. Type number: RLC-055 (PJD5122/PJD5211/PJD5221) RLC-056 (PJD5231) WARNING Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org • To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 50
in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 7. Insert the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 51
or Enter on the remote control. A warning message is displayed asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER on the projector or Enter on the remote control. The lamp time will be reset to '0'. CAUTION Do not reset if the lamp is not new or replaced as this could - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 52
needs to cool for 90 seconds after the power is turned off. Or 3. The projector has shut down automatically. If you try to re-start the projector, it will shut down again. Please contact your dealer for assistance. Lamp events The projector has shut down automatically. If you try to reRed - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 53
control does not work Cause The battery is out of power. There is an obstacle between the remote control and the projector. You are too far away from the projector. Remedy Replace the battery with a new one. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. 50 Troubleshooting - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 54
Projector Resolution Display system Lens F/Number Lamp Electrical • PJD5122: 800 x 600 SVGA • PJD5211/PJD5221/PJD5231: 1024 x 768 XGA 1-CHIP DMD F = 2.57 to 2.65, f = 21 to 23.1 mm • PJD5122/PJD5211/PJD5221: 220 W lamp (RLC-055) • PJD5231: 210 W lamp (RLC-056) Power supply Power consumption - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 55
.4 mm (H) x 225 mm (D) 225 96.4 Ceiling mount installation 189 264 60 66 Ceiling mount screws: M4 x 8 (Max. L = 10 mm) 119 67 Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 VGA_50 VGA_120 SVGA_60 SVGA_72 SVGA_75 SVGA_85 SVGA_50 SVGA_120 52 Specifications - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 56
960_85 WXGA+_60 SXGA+_60 UXGA MAC13 MAC16 MAC19 MAC21 1024 x 768@120Hz is not supported for the PJD5122. Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 480p(525p)@60Hz 576i(625i)@50Hz carrier Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 Specifications 53 - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 57
for any particular purpose. Further, ViewSonic Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. *DLP and Digital Micromirror Device (DMD) are trademarks of Texas - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 58
Appendix IR control table Key Format Byte1 Byte2 Byte3 Byte4 Power NEC 83 F4 02 fd Freeze NEC 83 F4 03 fc Up Down NEC NEC 83 F4 0b f4 83 F4 0c f3 Left Right - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 59
on Turn off Power status (on/ off) High Altitude Mode Off High Altitude Mode On High Altitude Mode status Lamp Mode Normal Lamp Mode Economic Lamp Mode status Front Table Rear Table Rear Ceiling Front Ceiling Projector position status Off TI 3D DLP Link 3D Sync Status Off On 3D Sync Invert Status - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 60
Contrast Brightness Aspect Ratio Auto Adjust Horizontal Position Vertical Position Color temperature Write Read Write Read Write Read Execute Write Read Write Read Write Read Contrast decrease Contrast increase Contrast ratio Brightness decrease Brightness increase Brightness Aspect ratio Auto - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 61
Write Read Write Read Write Read Write Read Blank on Blank off Blank status Decrease Increase Keystone status Brightest Cinema User 1 User 2 Daylight / Gaming ViewMatch Color Mode status Primary color R Primary color G Primary color B Primary color C Primary color M Primary color Y Primary color - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 62
Source input Write Input source VGA Input source VGA2 Input source Composite Input source S-VIDEO 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x00 0x60 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x08 0x68 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x05 0x65 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x06 0x66 - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 63
Lamp Time Error status Write Read Read Reset Lamp usage hour Lamp usage hour Read error status 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x01 0x00 0x62 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 0x63 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x0C 0x0D 0x66 60 Appendix - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 64
support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Australia/New Zealand Canada Europe Hong Kong India Web Site www.viewsonic.com.au www.viewsonic.com www.viewsoniceurope.com www.hk.viewsonic.com www.in.viewsonic - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 65
ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts , or failure to follow instructions supplied with the product. b. Operation outside of product specifications. c. Operation of the - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 66
h. Use of supplies or parts not meeting ViewSonic's specifications. i. Normal wear and tear. j. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 67
Any damage of the product due to shipment. c. Causes external to the product, such as electrical power fluctuations or failure. d. Use of supplies or parts not meeting ViewSonic's specifications. e. Normal wear and tear. f. Any other cause which does not relate to a product defect. 3. Any product - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 68
Acapulco Monterrey: GS Computación (Grupo Sesicomp) Global Product Services Progreso #6-A, Colo Centro Mar Caribe # 1987, Esquina 15-13-67-00 E-Mail. [email protected] Tijuana: FOR USA SUPPORT: STD ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut, - ViewSonic PJD5122 | PJD5211, PJD5221, PJD5231, PJD5122 User Guide (English) - Page 69
ViewSonic
®
IMPORTANT:
Please read this User Guide to obtain important information on install-
ing and using your product in a safe manner, as well as registering your product for
future service.
Warranty information contained in this User Guide will describe your
limited coverage from ViewSonic Corporation, which is also found on our web site
at http://www.viewsonic.com in English, or in specific languages using the Regional
selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”
Model No. : VS13304/VS13305
VS13306/VS13308
PJD5211/PJD5221/
PJD5231/PJD5122
DLP Projector
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
-
使用手冊 (繁體)
-
使用手冊 (簡體)
-
사용자 안내서
- Podręcznik użytkownika
- Kullanιcι kιlavuzu