ViewSonic PJD5126 PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6
ViewSonic PJD5126 Manual
View all ViewSonic PJD5126 manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJD5126 manual content summary:
- ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 1
PJD6553w_PJD6653w_ PJD6683w DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 2
. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. manufacturer's instructions. blades and a third grounding prong. The wide blade and the third prong are provided for replacement of the obsolete outlet. power outlet is located near the unit so that it is easily - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 4
Declaration of RoHS Compliance Substance Proposed Maximum Concentration Actual Concentration Cadmium (Cd) ) Polybrominated biphenyls (PBB) as noted below: iii - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 5
Purchase Date: For Your Records PJD5126_PJD5226_PJD5226w_PJD6223_PJD6253_PJD6353_ PJD6383_PJD6553w_PJD6653w_PJD6683w ViewSonic DLP Projector VS14295/VS14551/VS14552/VS14191/VS14193/ VS14555/VS14553/ VS14195/VS14554/VS14550 PJD5126/PJD5226/PJD5226w/PJD6223/PJD6253/PJD6353/PJD6383/ PJD6553w/PJD6653w - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 6
through a LAN environment 39 Using the projector in standby mode. 45 Shutting down the projector 45 Menu operation 46 Maintenance 56 Care of the projector 56 Lamp information 57 Troubleshooting 63 Specifications 64 Projector specifications 64 Dimensions 66 Ceiling mount installation 66 - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 7
the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 8
transporting or installation. It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a pleasant experience using your projector, so we need to bring this safety matter to your attention to prevent damage - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 9
lamp by up to 70% when no input signal can be detected for a set period of time. • Presentation timer for better control of time during presentations • Support 3D DLP distance. • The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is normal and - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 10
PJD6653w/PJD6683w Projector Power Cord VGA Cable PJD5126/PJD5226/ PJD5226w/PJD6223/ PJD6353/PJD6653w PJD6253/PJD6383/ PJD6553w/PJD6683w Multi-language user manual DVD Optional accessories 1. Replacement lamp 2. Soft carry case 3. VGA-Component adapter Quick Start Guide Remote Control - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 11
Projector exterior view Front/upper side PJD5126/PJD5226/PJD5226w/ PJD6223/PJD6253/PJD6553w 1 2 5 3 4 6 7 PJD6353/PJD6383/ PJD6653w/PJD6683w 1 2 5 3 4 6 7 Rear/lower side PJD5126 1. External control panel (See "Projector" on page 7 for details.) 2. Lamp cover 3. Vent (heated air - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 12
Controls and functions Projector PJD5126/PJD5226/PJD5226w/ PJD6223/PJD6253/PJD6553w 1 2 PJD6353/PJD6383/ PJD6653w/PJD6683w 1 3 8 4 9 lamp. Lights up Hides the screen picture. or flashes when the lamp has developed a 5. POWER indicator light problem. Lights up or flashes when the projector - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 13
Remote control PJD5126/PJD5226/ PJD5226w/PJD6223/ the selected On-Screen Display Toggles the projector between standby (OSD) menu item. / Selects Video, S-Video or HDMI source for display. Performs the between the normal and mouse modes. Manually corrects distorted images resulting from an angled - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 14
pattern. 16. Blank Hides the screen picture. 17. DynamicEco™ Decreases the power consumption of the lamp by up to 70%. 21. Volume keys (+, -) Magnifies or reduces the volume level. 22. Toggles the projector audio between on and off. 23. Color Mode Selects an available picture setup mode. 24. Timer - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 15
initial code is set to A. If different codes are set on the projector and remote control, there will be no response from the remote control. 2. Set the input signal to D-Sub / Comp. 1, D-Sub / Comp. 2 or HDMI. 3. Press Mouse on the remote control to switch from the normal mode to the mouse mode - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 16
like the kitchen, bathroom, sauna, sunroom or in a closed car. • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 17
front of the screen. This is the most common way to position the projector for quick setup and portability. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the projector ceiling mount kit from your dealer to mount your - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 18
page 66 for the center of lens dimensions of this projector before calculating the appropriate position. The "screen" mentioned below refers to the projection screen usually consisting of a surface and a support structure PJD5126/PJD5226/PJD6223/PJD6253/PJD6353/ PJD6383 • 4:3 image on a 4:3 screen - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 19
PJD6253 (a) Screen Size [inch (m)] 4:3 image on a 4:3 Screen (b) Projection (c) Image (d) Vertical distance [m (inch)] height offset min. max. [cm (inch)] [cm (inch)] 16:9 image on a 4:3 Screen (b) Projection distance (c) Image (d) Vertical [m (inch)] height offset min. max. [cm (inch - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 20
PJD5226w/PJD6553w/PJD6653w/PJD6683w • 16:10 image on a 16:10 screen (b) (a) (d) (c) (f) (e) (a) (e) (f) (c) (d) (b) • 16:10 image on a 4:3 screen (b) (a) (d) (e): Screen (c) (f) (e) (f): Center of lens (a) (e) (f) (c) (d) (b) PJD5226w (a) Screen Size [inch (m)] 16:10 image on a 16:10 Screen - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 21
among these numbers due to optical component variations. It is recommended that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 22
shown below, some cables may not be included with the projector (see "Shipping contents" on page 5). They are commercially PJD6353/PJD6383/ TYPE B HDMI USB RS-232 PJD6553w/PJD6653w/ LAN MONITOR OUT COMPUTER IN 1 2 PJD6683w COMPUTER IN 2 Audio out PJD5126/PJD5226/ PJD5226w TYPE B - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 23
on the projector to an external monitor with a VGA cable following the instructions below: To connect the projector to a monitor: 1. Connect the projector to on the projector. • For the PJD5126/PJD5226/PJD5226w, the MONITOR OUT output only works when COMPUTER IN 1 is made to the projector. • For - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 24
an HDMI device" on page 20 for how to connect the projector to a HDMI source device and other details. If no HDMI source projector to a composite Video device. Connecting audio The projector has one built-in mono speaker which is designed to provide basic audio functionality accompanying data - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 25
HDMI-input port on the projector. • In the unlikely event that you connect the projector to a DVD player via the projector's HDMI device. To connect the projector to a Component Video 2 socket on the projector. • The projector is only capable of playing displayed after the projector is turned on - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 26
the composite Video output socket of the Video source device. 2. Connect the other end of the Video cable to the VIDEO socket on the projector. • The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting audio" on page 19 for details. • If - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 27
lamp. • To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning it off. 3. If the projector is activated for the first time, select your OSD language following the on-screen instructions frequency/resolution of the input signal exceeds the projector's - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 28
Sync 3D Sync Invert Color Management Analog RGB Off Auto 16 0 On Disable MENU Exit Language Projector Position Auto Power Off Blank Timer Panel Key Lock Timer Controller Splash Screen Screen Capture Message LAN Control Settings Analog RGB English Front Table Disable Disable Off Disable ViewSonic - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 29
cannot be used unless the correct password is entered every time the projector is started. • The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance or right after the password is entered so that it is available to - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 30
on the screen. RECALL PASSWORD Please write down the recall code, and contact ViewSonic Customer Center. 2. Write down the number and turn off your projector. Recall code: 0 2 1 2 3. Seek help from the local service center to decode MENU Exit the number. You may be required to provide proof - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 31
error message is displayed lasting for three seconds, and the message 'INPUT PASSWORD' is displayed for your retry. You can press MENU/EXIT on the projector or Exit on the remote control to cancel the change or try another password. Though the password function is disabled, you need to keep the - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 32
. • Please see "Projector specifications" on page 64 for the native display resolution of this projector. For best display picture PJD5126/PJD5226/PJD5226w D-Sub / Comp. 1 D-Sub / Comp. 2 Video S-Video PJD6223/PJD6253/PJD6353/ PJD6383/PJD6553w/ PJD6653w/PJD6683w D-Sub / Comp. 1 D-Sub / Comp. 2 HDMI - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 33
or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 29 for details. • Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 34
image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 35
in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal. To change the projected image ratio - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 36
white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want to 16:10 picture - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 37
can follow one of the following steps. • Press MODE/ENTER on the projector or Color Mode on the remote control repeatedly until your desired mode is selected signals: S-Video, Video, D-Sub / Comp. 1/2 (YPbPr) / HDMI 1. Brightest mode: Optimized for daylight viewing, with living room level ambient - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 38
need. You can use one of the picture modes (except the User 1/User 2) as a starting point and customize the settings. 1. Press MENU/EXIT on the projector or Menu on the remote control to open the OnScreen Display (OSD) menu. 2. Go to the PICTURE > Color Mode menu. 3. Press / to select User 1 or - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 39
in the projected picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. When - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 40
it. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you can project any image from the disc on the screen and enter the Color Management menu to make adjustments. To adjust the settings - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 41
timer, press and press / to highlight Start Counting and press MODE/ENTER. 8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying on the screen. The timer starts counting when the timer - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 42
the image. The word 'FREEZE' will be displayed in the upper left corner of the screen. To release the function, press any key on the projector or remote control. Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 43
/PJD6683w series. In addition to selecting the projector preset startup screen from among ViewSonic logo, Black or Blue screen, you can target picture. When the resolution of the input signal is higher than the projector's native display resolution (See "Projector specifications" on page 64 for - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 44
This function is only available for the PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/ PJD6653w/PJD6683w series. The projector supports Crestron® software. With correct settings for the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and the - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 45
using Microsoft Internet Explorer, make sure it is version 7.0 or higher. • The screen shots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the projector in the address bar of your browser and press Enter. 2. The main page of the Network Control - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 46
site at http://www.amx.com/. 4. If your projector is connected to a network which supports Simple Mail Transfer Protocol (SMTP), you can configure it Network Settings Password SNMP Input Length Maximum Number of Characters DHCP/Manual (N/A) IP Address XXX.XXX.XXX.XXX Subnet Mask XXX.XXX.XXX - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 47
Error Over Temperature Lamp Time Alert Submit Issue Test Mail 40 40 30 40 30 40 14 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) are prohibited/ About Crestron e-Control® 1. The Crestron e-Control® page provides a variety of virtual keys to control the projector or adjust the projected pictures. i ii - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 48
System. Please contact Creston or refer to its user manual for setup information. ii. You can name the projector, keep track of its location and the person in After making the adjustments, press the Send button and the data will be saved for the projector. vi. Press Exit to go back to the remote - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 49
(N/A) 20 20 3. The info page displays the information and status of this projector. Press Exit to go back to the remote network operation page. 4. After pressing please access below website to get RoomView™ User Guide and more information: http://www.crestron.com/products/roomview_connected_embedded_projectors_devices/ - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 50
SNMP, AMX and Xpanel formats supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details, please follow its user guide or website respectively to control and manage projectors. Using the projector in standby mode Some of the projector functions are available in standby - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 51
menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited only) Keystone Position Phase H. Size Zoom 3D Sync TI 3D DLP Link/Off 3D Sync Invert Disable/Invert Primary Color R/G/B/C/M/Y - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 52
min/15 min/30 min Smart Restart Off/On 3. SOURCE PJD5126/PJD5226/PJD5226w: Off/On PJD6223/PJD6253/PJD6353/PJD6383: Pattern 01/02/03/04/05/User PJD6553w/PJD6653w/PJD6683w: 01/02/03/04/User Projection (Projector Position)/3D Sync/Lamp Mode/DCR/Closed Caption/Auto Off (Auto Power My Button - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 53
SYSTEM SETUP: Advanced Message On/Off LAN Control DHCP On/Off Settings Projector IP Address (PJD6223/ PJD6253/ PJD6353/ PJD6383/ Subnet Mask Default Caption Version CC1/CC2/CC3/CC4 Lamp Mode Normal/Economic Lamp Settings Reset Lamp Timer Equivalent Lamp Hour Timer Period 1~240 minutes - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 54
Main menu Sub-menu 6. INFORMATION Current System Status Options • Source • Color Mode • Resolution • Color System • Equivalent Lamp Hour • MAC Address (PJD6223/ PJD6253/PJD6353/PJD6383/ PJD6553w/PJD6653w/ PJD6683w only) 49 - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 55
PJD5126/PJD5226/PJD5226w. You need to wear a pair of 3D glasses to view the 3D images. • TI 3D DLP Link: Enables projector for TI 3D DLP Link. • Off: Disables 3D. 3D Sync Invert When the 3D function to correct the problem. (For TI 3D DLP Link only) Color Management See "Color Management" on page 35 - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 56
Color Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Description Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 32 for details. Selects a picture mode that most - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 57
See "Switching input signal" on page 27 for details. Color Space Conversion See "Changing Color Space" on page 27 for details. Allows the projector to decrease the power consumption DynamicEco automatically if no input signal is detected after a set period of time. Timer It takes some time to - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 58
37 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC source - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 59
menu Function Audio Settings Menu Settings Closed Caption Lamp Settings Presentation Timer Description The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 60
in the PICTURE menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format, NTSC, PAL, SECAM, or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. MAC Address Shows the MAC Address of your projector. MAC Address stands for - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 61
only thing you need to do on a regular basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface. • Use a canister of compressed air - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 62
menu. 4. To leave the menu, press MENU/EXIT on the projector or Exit on the remote control. You can also get the lamp hour information on the INFORMATION menu. Extending lamp life The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 63
If the lamp is not replaced beforehand, it must be replaced when you see this message. The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > ____ Hours Lamp usage time exceeded OK Notice Lamp usage time exceeded Replace lamp (refer to User Manual) Then - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 64
sharp pieces. Before replacing the lamp, clean the lamp compartment and dispose of cleaning materials. Be careful of sharp edges in the lamp compartment. Wash hands after lamp replacement. • Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 65
in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 7. Insert the - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 66
A warning message is displayed asking if you want to reset the lamp timer. 17. Highlight Reset and press MODE/ENTER on the projector or ENTER on the remote control. The lamp time will be reset to '0'. CAUTION Do not reset if the lamp is not new or replaced as this could cause damage. Notice Reset - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 67
Off Red Red Red Red Red Red Red Red Red Green Power events Off Stand-by mode Off Powering up Off Normal operation Lamp events The projector has shut down automatically. If you try to reRed start the projector, it will shut down again. Please contact your dealer for assistance. Red 1. The - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 68
cover. Remedy Adjust the focus of the lens using the focus ring. Adjust the projection angle and direction as well as the height of the projector if necessary. Open the lens cover. Remedy Replace the battery with a new one. Remove the obstacle. Stand within 8 meters (26 feet) of the - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 69
Specifications Projector specifications All specifications are subject to change without notice. General Product name Optical Resolution Display system Lamp Electrical Power supply Power consumption Mechanical Weight DLP Projector PJD5126: 800 x 600 SVGA PJD5226/PJD6223/PJD6253/PJD6353/PJD6383: - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 70
RCA jack x 1 SD/HDTV signal input Analog - D-Sub Component RCA jack x 3 (through RGB input) Digital - PJD5126/PJD5226/PJD5226w: N/A PJD6223/PJD6253/PJD6353/PJD6383/PJD6553w/PJD6653w/ PJD6683w: HDMI V1.3 x 1 Audio signal input PC audio jack x 1 PC audio jack x 2 Output terminal RGB output - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 71
Dimensions 294 mm (W) x 84 mm (H) x 242 mm (D) (Excluding extrusions) PJD5126/PJD5226/PJD5226w/ PJD6223/PJD6253/PJD6553w MENU EXIT SOURCE MTEEOMPNDTEER LMAMPUTO 242 84 PJD6353/PJD6383/ PJD6653w/PJD6683w 294 MENU EXIT SOURCE MTEEOMPNDTEER LMMP AU TO 242 - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 72
Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1400 x 1050 1600 x 1200 640 x 480@67Hz 832 x 624@75Hz 1024 x - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 73
Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 480p .00 60 50 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 74
, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 75
NEC 83 F4 0f f0 Color Mode NEC 83 F4 10 ef Mute NEC 83 F4 14 EB Auto Sync NEC 83 F4 08 f7 PJD5126/PJD5226/ Source NEC 83 F4 04 fb PJD5226w/PJD6223/ PJD6353/PJD6653w Blank NEC 83 F4 07 f8 Menu NEC 83 F4 30 CF Enter / Mouse - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 76
83 F4 9E 61 Mute NEC 83 F4 9D 62 Auto Sync NEC 83 F4 63 9C Source Blank Menu NEC 83 F4 7D 82 PJD5126/PJD5226/ NEC 83 F4 62 9D PJD5226w/PJD6223/ PJD6353/PJD6653w NEC 83 F4 6C 93 Enter / Mouse L key NEC 83 F4 6B 94 Exit NEC - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 77
BYTE3 BYTE4 BYTE5 BYTE6 BYTE7~N BYTE N+1 0x05 0x14 0x00 LSB MSB 0x00 0x00 Data Checksum Read Ex1. Read power status: 0x05 0x14 0x00 0x03 0x00 0x00 0x00 0x01 0x05 0x14 0x00 0x04 0x00 0x00 0x00 0x32 0x00 0x4A = 50 Ex3. Read lamp hours: 0x05 0x14 0x00 0x06 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x42 = - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 78
Reset Splash Screen Quick Power Off High Altitude Mode Lamp Mode Message Execute Write Read Write Read Write Read Write Read Write Read Splash Screen Black Splash Screen Blue Splash Screen ViewSonic Splash Screen Screen Capture Splash Screen Off Splash Screen status Quick Power Off Off Quick Power - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 79
Read Write Read Write Read Write Read Write Front Table Rear Table Rear Ceiling Front Ceiling projector position status OFF TI 3D DLP Link 3D Sync Status Off On 3D Sync Invert Status Contrast decrease Contrast increase Contrast ratio Brightness decrease Brightness increase Read Brightness Aspect - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 80
Horizontal position Write Read Vertical position Write Read Color temperature Write Read Blank Write Read KeystoneVertical Write Read Horizontal position shift right Horizontal position shift left Horizontal position Vertical position shift up Vertical position shift down read Vertical - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 81
Color mode Primary Color Hue Saturation Write Read Write Read Write Read Write Read Brightest Movie User 1 User 2 PC / Gaming ViewMatch Dynamic PC Dynamic Movie Preset mode status Primary color R Primary color G Primary color B Primary color C Primary color M Primary color Y Primary color status - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 82
decrease Gain increase Gain Freeze on Freeze off Freeze status Input source VGA Input source VGA2 Input source Composite Input source SVIDEO Input source HDMI Source Quick Auto Search on Quick Auto Search off Quick Auto Search status Mute on Mute off Mute status Increse Volume Decrese Volume Volume - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 83
Lamp Time Error status Write Read Read Reset Lamp usuage hour Lamp usuage hour Read error status 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x01 0x00 0x62 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 0x63 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x0C 0x0D 0x66 78 - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 84
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Zealand Canada Hong Kong India Korea Web Site T=Telephone F=Fax www.viewsonic.com.au www.viewsonic.com www.viewsoniceurope. com - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 85
Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: use, during the warranty period. If a product proves to be defective in material or workmanship during Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 86
3. How to get service: 1. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. 4. Limitation of implied warranties: Exclusion of damages: be - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 87
VIEWSONIC® PROJECTOR will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include How long the warranty is effective: consumer purchase. only. Who the warranty protects: What the warranty does not cover: How to get service: information - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 88
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: NÚMERO , Chih. Distrito Federal: Cuernavaca Guadalajara, Jal.: Guerrero Acapulco Monterrey: MERIDA: Oaxaca, Oax.: Tijuana: FOR USA SUPPORT: 83 - ViewSonic PJD5126 | PJD5126, PJD6223, PJD6253, PJD6553W, PJD5226, PJD5226W, PJD6 - Page 89
PJD5126_PJD5226_
PJD5226w_PJD6223_
PJD6253_PJD6353_PJD6383_
PJD6553w_PJD6653w_
PJD6683w
DLP Projector
User Guide
IMPORTANT:
Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
±²³´µ¶·²¸¹¸¶º»²·»¼·½¾²µ¿À»¶Á»²·»µÂ³¸²Ã¸»¾Ä·½ÅĽ³µ»Åµ²·½»Æ¿³»Ç³½²¶·Ä¾»µ³¾³¸Æ²¶·»È¶É»²·»
the upper right corner of our website.
“Antes de operar su equipo lea cu idadosamente
las instrucciones en este manual”
/ VS14555/VS14553/VS14195/VS14554/VS14550
Model No. VS14295/VS14551/VS14552/VS14191/VS14193